2ARBSEL3007565

FCC ID

Equipment: LTE Module

Hewlett Packard Enterprise EL3007565

11445 Compaq Center Dr W, Houston, TX 77070 United States

Application
Frequency Range
Final Action Date
Granted
K/5uGcLqN0Ulxcf6ebZUdw==
3550.0-3700.0
2019-01-31
APPROVED
ccxbMLEvTouvHB/8J2JQ+w==
699.0-716.0
2019-01-31
APPROVED
ccxbMLEvTouvHB/8J2JQ+w==
777.0-787.0
2019-01-31
APPROVED
ccxbMLEvTouvHB/8J2JQ+w==
814.0-824.0
2019-01-31
APPROVED
ccxbMLEvTouvHB/8J2JQ+w==
824.0-849.0
2019-01-31
APPROVED
ccxbMLEvTouvHB/8J2JQ+w==
1710.0-1755.0
2019-01-31
APPROVED
ccxbMLEvTouvHB/8J2JQ+w==
1720.0-1780.0
2019-01-31
APPROVED
ccxbMLEvTouvHB/8J2JQ+w==
1850.0-1910.0
2019-01-31
APPROVED
ccxbMLEvTouvHB/8J2JQ+w==
2305.0-2315.0
2019-01-31
APPROVED
ccxbMLEvTouvHB/8J2JQ+w==
2496.0-2690.0
2019-01-31
APPROVED
ccxbMLEvTouvHB/8J2JQ+w==
2500.0-2570.0
2019-01-31
APPROVED
File NameDocument TypeDateDirect
External photoExternal Photos 2019-01-31 00:00:00 pdf
ID Label/Location InfoID Label/Location Info 2019-01-31 00:00:00 pdf
Change ID LetterCover Letter(s) 2019-01-31 00:00:00 pdf
Change of Identification Authorization LetterCover Letter(s) 2019-01-31 00:00:00 pdf

Application Details:

EquipmentLTE Module
FRN0027862663
Grantee Code2ARBS
Product CodeEL3007565
Applicant BusinessHewlett Packard Enterprise
Business Address11445 Compaq Center Dr W , Houston,Texas United States 77070
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email[email protected]
Applicantyou hing yap –
Applicant Phone
Applicant Fax281 2044283
Applicant Email[email protected]
Applicant MailStop
Test FirmMRT Technology (Taiwan) Co.,Ltd
Test Firm ContactChenz Ker
Test Firm Phone
Test Firm Fax886-3-328-8918
Test Firm Email[email protected]
Certified ByChenz Ker – Manager
Comment [ccxbMLEvTouvHB/8J2JQ+w==]: Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.
Comment [K/5uGcLqN0Ulxcf6ebZUdw==]: Power out is conducted at the antenna terminal. Single Modular Approval. Permissive Change to cover LTE Band 48, as documented in this filing. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use. This device also supports some other bands including: LTE Bands 2/4/5/7/12/13/14/26/30/41/66.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC