RF Test Report

FCC ID: 2ARB3TAIKBT3

Test Report

Download: PDF
FCCID_4033957

I7] Test Model: Ready 2 Taik BT3 FCC Part 15C Measurement and Test Report For Wing Cheong Electrical Company Limited Rm. 1313—1314, Block A, Hoi Luen Industrial Centre, 55 Hoi Yuen Road, Kwun Tong, Kowloon, Hong Kong FCC ID:2ARB3TAIKBT3 FCC Rule(s): FCC Part 15.249 Product Description: Ready 2 Taik BT3 Tested Model: Ready 2 Taik BT3 Report No.: STR180883481 Sample Receipt Date: 2018—08—29 Tested Date: 2018—08—29 to 2018—09—10 Issued Date: 2018—09—11 Tested By: Jason Su / Enginger Jfi‘fi/fl h Es Reviewed By: Silin Chen / EMC Manager LM JL P Approved & Authorized By: Jandy So / PSQ Manager ;‘Jfiw Prepared By: Shenzhen SEM Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bac‘an District, Shenzhen, P.R.C. (518101) Tel.: +86—755—33663308 Fax.: +86—755—33663309 Website: www.semtest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ltd. Report No.: STR180883481 Page 1 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 TABLE OF CONTENTS 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...............................................................................3 1.2 TEST STANDARDS...................................................................................................................................................4 1.3 TEST METHODOLOGY .............................................................................................................................................4 1.4 TEST FACILITY .......................................................................................................................................................4 1.5 EUT SETUP AND TEST MODE .................................................................................................................................5 1.6 MEASUREMENT UNCERTAINTY ..............................................................................................................................5 1.7 TEST EQUIPMENT LIST AND DETAILS .....................................................................................................................6 2. SUMMARY OF TEST RESULTS ...........................................................................................................................7 3. ANTENNA REQUIREMENTS ................................................................................................................................8 3.1 STANDARD APPLICABLE.........................................................................................................................................8 3.2 TEST RESULT..........................................................................................................................................................8 4. RADIATED EMISSIONS .........................................................................................................................................9 4.1 STANDARD APPLICABLE.........................................................................................................................................9 4.2 TEST PROCEDURE ...................................................................................................................................................9 4.3 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................11 4.4 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................11 5. OUT OF BAND EMISSIONS .................................................................................................................................19 5.1 STANDARD APPLICABLE.......................................................................................................................................19 5.2 TEST PROCEDURE .................................................................................................................................................19 5.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................19 6. EMISSION BANDWIDTH .....................................................................................................................................20 6.1 STANDARD APPLICABLE.......................................................................................................................................20 6.2 TEST PROCEDURE .................................................................................................................................................20 6.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................20 7. CONDUCTED EMISSIONS ..................................................................................................................................22 7.1 TEST PROCEDURE .................................................................................................................................................22 7.2 BASIC TEST SETUP BLOCK DIAGRAM ...................................................................................................................22 7.3 TEST RECEIVER SETUP .........................................................................................................................................22 7.4 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................22 Report No.: STR18088348I Page 2 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: Wing Cheong Electrical Company Limited Address of applicant: Rm. 1313-1314, Block A, Hoi Luen Industrial Centre, 55 Hoi Yuen Road,Kwun Tong, Kowloon, Hong Kong Manufacturer: ACCUTONE ELECTRONICS (SHENZHEN) LIMITED Address of manufacturer: BUILDING 5, XILIANG INDUSTRIAL PARK, BUJI TOWN, LONGGANG DISTRICT, SHENZHEN, CHINA General Description of EUT Product Name: Ready 2 Taik BT3 Trade Name: / Model No.: Ready 2 Taik BT3 Adding Model(s): / Rated Voltage: DC 3.7V Power Adapter Model: / Note: The test data is gathered from a production sample, provided by the manufacturer. Technical Characteristics of EUT Frequency Range: 5731MHz-5820MHz Max. Field Strength: 94.28dBuV/m Modulation: FSK Antenna Type: Integral Antenna Antenna Gain: 1.46dBi Lowest Internal Frequency of EUT: 16MHz Report No.: STR18088348I Page 3 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 1.2 Test Standards The tests were performed according to following standards: FCC Rules Part 15.249: Operation within the bands 902-928 MHz, 2400-2483.5 MHz, 5725-5875 MHz, and 24.0-24.25 GHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices. Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which results in lowering the emission, should be checked to ensure compliance has been maintained. 1.3 Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, The equipment under test (EUT) was configured to measure its highest possible emission level. The test modes were adapted accordingly in reference to the Operating Instructions. 1.4 Test Facility FCC – Registration No.: 125990 Shenzhen SEM Test Technology Co., Ltd. Laboratory has been recognized to perform compliance testing on equipment subject to the Commissions Declaration Of Conformity (DOC). The Designation Number is CN5010, and Test Firm Registration Number is 125990. Industry Canada (IC) Registration No.: 11464A The 3m Semi-anechoic chamber of Shenzhen SEM.Test Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A. Report No.: STR18088348I Page 4 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 1.5 EUT Setup and Test Mode The EUT was operated in the engineering mode to fix the Tx frequency that was for the purpose of the measurements. All testing shall be performed under maximum output power condition, and to measure its highest possible emissions level, more detailed description as follows: Test Mode List Test Mode Description Remark TM1 Low Channel 5731MHz TM2 Middle Channel 5773MHz TM3 High Channel 5820MHz Test Conditions Temperature: 22~25 °C Relative humidity 50~55 %. ATM Pressure: 1019 mbar EUT Cable List and Details Cable Description Length (m) Shielded/Unshielded With / Without Ferrite / / / / Special Cable List and Details Cable Description Length (m) Shielded/Unshielded With / Without Ferrite USB Cable 1.0 Shielded Without Core Auxiliary Equipment List and Details Description Manufacturer Model Serial Number Adapter ARCHOS DCS02-0501000 / 1.6 Measurement Uncertainty Measurement uncertainty Parameter Conditions Uncertainty RF Output Power Conducted ±0.42dB Occupied Bandwidth Conducted ±1.5% Conducted Spurious Emission Conducted ±2.17dB 9-150kHz ±3.74dB Conducted Emissions Conducted 0.15-30MHz ±3.34dB 30-200MHz ±4.52dB 0.2-1GHz ±5.56dB Transmitter Spurious Emissions Radiated 1-6GHz ±3.84dB 6-18GHz ±3.92dB Report No.: STR18088348I Page 5 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 1.7 Test Equipment List and Details No. Description Manufacturer Model Serial No. Cal Date Due Date Spectrum SEMT-1072 Agilent E4407B MY41440400 2018-05-22 2019-05-21 Analyzer Spectrum Rohde & SEMT-1031 FSP30 836079/035 2018-05-22 2019-05-21 Analyzer Schwarz EMI Test Rohde & SEMT-1007 ESVB 825471/005 2018-05-22 2019-05-21 Receiver Schwarz SEMT-1008 Amplifier Agilent 8447F 3113A06717 2018-05-22 2019-05-21 SEMT-1043 Amplifier C&D PAP-1G18 2002 2018-05-22 2019-05-21 Broadband SEMT-1011 Schwarz beck VULB9163 9163-333 2017-06-08 2020-06-07 Antenna SEMT-1042 Horn Antenna ETS 3117 00086197 2017-06-08 2020-06-07 SEMT-1121 Horn Antenna Schwarzbeck BBHA 9170 BBHA9170582 2017-06-08 2020-06-07 SEMT-1069 Loop Antenna Schwarz beck FMZB 1516 9773 2017-06-08 2020-06-07 EMI Test Rohde & SEMT-1001 ESPI 101611 2018-05-22 2019-05-21 Receiver Schwarz SEMT-1003 L.I.S.N Schwarz beck NSLK8126 8126-224 2018-05-22 2019-05-21 Rohde & SEMT-1002 Pulse Limiter ESH3-Z2 100911 2018-05-22 2019-05-21 Schwarz Direction SEMT-1168 Pre-amplifier PAP-0126 14141-12838 2018-05-22 2019-05-21 Systems Inc. Direction SEMT-1169 Pre-amplifier PAP-2640 14145-14153 2018-05-22 2019-05-21 Systems Inc. Spectrum Rohde & SEMT-1163 FSP40 100612 2018-05-22 2019-05-21 Analyzer Schwarz DRG Horn A.H. SEMT-1170 SAS-574 571 2018-03-19 2021-03-18 Antenna SYSTEMS SEMT-1166 Power Limiter Agilent N9356B MY45450376 2018-05-22 2019-05-21 SEMT-1048 RF Limiter ATTEN AT-BSF-2400~2500 / 2018-05-22 2019-05-21 SEMT-1076 RF Switcher Top Precision RCS03-A2 / 2018-05-22 2019-05-21 SEMT-C001 Cable Zheng DI LL142-07-07-10M(A) / 2018-03-19 2019-03-18 SEMT-C002 Cable Zheng DI ZT40-2.92J-2.92J-6M / 2018-03-19 2019-03-18 SEMT-C003 Cable Zheng DI ZT40-2.92J-2.92J-2.5M / 2018-03-19 2019-03-18 SEMT-C004 Cable Zheng DI 2M0RFC / 2018-03-19 2019-03-18 SEMT-C005 Cable Zheng DI 1M0RFC / 2018-03-19 2019-03-18 SEMT-C006 Cable Zheng DI 1M0RFC / 2018-03-19 2019-03-18 Report No.: STR18088348I Page 6 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 2. SUMMARY OF TEST RESULTS FCC Rules Description of Test Item Result §15.203 Antenna Requirement Compliant §15.205 Restricted Band of Operation Compliant §15.207(a) Conducted Emission Compliant §15.209(a)(f) Radiated Spurious Emissions Compliant §15.249(a) Field Strength of Emissions Compliant §15.249(d) Out of Band Emission Compliant §15.215 (c) Emission Bandwidth Compliant Report No.: STR18088348I Page 7 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 3. Antenna Requirements 3.1 Standard Applicable According to FCC Part 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. 3.2 Test Result This product has an integral antenna, fulfill the requirement of this section. Report No.: STR18088348I Page 8 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 4. Radiated Emissions 4.1 Standard Applicable According to §15.249(a), the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Field strength of fundamental Field strength of Harmonics Fundamental Frequency (milli-volts/meter) (micro-volts/meter) 902-928 MHz 50 500 2400-2483.5 MHz 50 500 5725-5875 MHz 50 500 24.0-24.25 GHz 250 2500 (d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in §15.35 for limiting peak emissions apply. Spurious Radiated Emissions measurements starting below or at the lowest crystal frequency. 4.2 Test Procedure The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.205 15.249(a) and FCC Part 15.209 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. Report No.: STR18088348I Page 9 of 24 FCC Part 15.249

I7] TEST Model: Ready 2 Taik BT3 I Antenna <———— uo —ug y ————# Tower ufin—— J|I| EUT SYS 1 Tumntable :c Table l To EMI Receiver +444 444 4 1444444444444 44444444444 4 41 4 4 4 4 4 4 1 4 Ground Plane C] Antenna Tower I 2 & 3 |&—— m EUT SYS C1 l 1 . Turntable > Table To EMI Receiver Ground Plane Frequency :OkHz—30MHz Frequency :30MHz—1GHz Frequency :Above 1GHz RBW=10KHz, RBW=120KHz, RBW=1MHz, VBW =30KHz VB W=300KHz VBW=3MHz(Peak), 10Hz(AV) Sweep time= Auto Sweep time= Auto Sweep time= Auto Trace = max hold Trace = max hold Trace = max hold Detector function = peak Detector function = peak, QP Detector function = peak, AV Report No.: STR180883481 Page 10 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 4.3 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and the Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading + Ant. Factor + Cable Loss – Ampl. Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -6dBµV means the emission is 6dBµV below the maximum limit. The equation for margin calculation is as follows: Margin = Corr. Ampl. – FCC Part 15C Limit 4.4 Summary of Test Results/Plots Note: this EUT was tested in 3 orthogonal positions and the worst case position data was reported. Report No.: STR18088348I Page 11 of 24 FCC Part 15.249

I7] Test Model: Ready 2 Taik BT3 » Spurious Emissions Below 1GHz Test Channel Low Polarity: Horizontal 80.0 dBuV/m i 1 1 i PoP d 1 1 i | Limit1: — —20.0 ( Pod P fad i i ( bo d d 30.000 4‘0 5Il] Ilil] 7"0 él] —— ~ :Iil]l] -llll]l] 500 I;UD 7"00 ‘ 1060.0 MHz No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 43.0504 33.91 —13.17 20.74 40.00 —19.26 207 100 peak 2 108.6470 32.54 —13.95 18.59 43.50 —24.91 222 100 peak 3934723 36.43 —6.69 29.74 46.00 —16.26 81 100 peak Report No.: STR180883481 Page 12 of 24 FCC Part 15.249

Test Model: Ready 2 Taik BT3 Test Channel Low Polarity: Vertical 80.0 dBu¥/m 70 60 50 40 30 20 10 0 40 —20.0 ; 1O 1O ; ; ; 1O P P 30.000 40 600 700 1000.0 MHz No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 46.6664 33.94 —12.87 21.07 40.00 —18.93 285 100 peak 2 93.7685 33.99 —15.51 18.48 43.50 25.02 150 100 peak 334.8589 32.14 —6.66 25.48 46.00 20.52 53 100 peak Report No.: STR180883481 Page 13 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 Test Channel Middle Polarity: Horizontal 80.0 dBu¥/m 70 60 50 40 30 20 10 0 410 es ~20.0 ; ; DP ; ; 1O P 30.000 40 50 60 70 80 300 400 500 600 700 1000.0 MHz No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 42.8997 34.11 —13.18 20.93 40.00 —19.07 144 100 peak 2 51.6615 33.70 —12.82 20.88 40.00 —19.12 176 100 peak 374.6225 34.49 —6.83 27.66 46.00 —18.34 63 100 peak Report No.: STR180883481 Page 14 of 24 FCC Part 15.249

I7] TEST Model: Ready 2 Taik BT3 Test Channel Middle Polarity: Vertical 80.0 dBu¥/m 30.000 40 50 60 70 300 600 70 0 1000.0 MHz No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 44.1201 34.91 —13.03 21.88 40.00 —18.12 99 100 peak 2 105.6414 33.11 —14.03 19.08 43.50 24.42 174 100 peak 3014223 31.03 740 23.63 46.00 22.37 109 100 peak Report No.: STR180883481 Page 15 of 24 FCC Part 15.249

mm d Model: Ready 2 Taik BT3 Test Channel High Polarity: Horizontal 80.0 dBu¥/m 600 700 1000.0 MHz No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 527599 34.65 —12.87 21.78 40.00 —18.22 164 100 peak 2 91.8162 34.56 —15.98 18.58 43.50 —24.92 139 100 peak 390.7225 37.29 —6.78 30.51 46.00 —15.49 101 100 peak Report No.: STR180883481 Page 16 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 Test Channel High Polarity: Vertical 80.0 dBu¥/m 70 60 50 40 30 20 10 0 40 ; —20.0 ; DOGO P ; DO P P( 30.000 40 50 60 70 80 300 400 500 600 700 1000.0 MHz No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 45.3755 34.58 —12.95 21.63 40.00 —18.37 101 100 peak 2 51.8430 35.00 —12.81 22.19 40.00 —17.81 331 100 peak 109.0285 32.79 —13.94 18.85 43.50 —24.65 144 100 peak Report No.: STR180883481 Page 17 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 Spurious Emissions Above 1GHz Frequency Reading Correct Result Limit Margin Polar Detector (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) H/V Low Channel-5731MHz 5731 94.15 -1.51 92.64 114 -21.36 H PK 5731 90.99 -1.51 89.48 94 -4.52 H AV 11462 55.45 8.91 64.36 74 -9.64 H PK 11462 40.91 8.97 49.88 54 -4.12 H AV 5731 94.29 -1.51 92.78 114 -21.22 V PK 5731 90.90 -1.51 89.39 94 -4.61 V AV 11462 56.05 8.91 64.96 74 -9.04 V PK 11462 41.22 8.97 50.19 54 -3.81 V AV Middle Channel-5773MHz 5773 95.69 -1.41 94.28 114 -19.72 H PK 5773 91.49 -1.41 90.08 94 -3.92 H AV 11546 54.33 9.00 63.33 74 -10.67 H PK 11546 40.34 9.00 49.34 54 -4.66 H AV 5773 94.62 -1.41 93.21 114 -20.79 V PK 5773 91.33 -1.41 89.92 94 -4.08 V AV 11546 53.26 9.00 62.26 74 -11.74 V PK 11546 40.34 9.00 49.34 54 -4.66 V AV High Channel-5820MHz 5820 92.62 -1.29 91.33 114 -22.67 H PK 5820 89.49 -1.29 88.20 94 -5.80 H AV 11640 52.67 8.90 61.57 74 -12.43 H PK 11640 40.27 8.90 49.17 54 -4.83 H AV 5820 92.04 -1.29 90.75 114 -23.25 V PK 5820 88.94 -1.29 87.65 94 -6.35 V AV 11640 53.83 8.90 62.73 74 -11.27 V PK 11640 40.78 8.90 49.68 54 -4.32 V AV Note: Testing is carried out with frequency rang 9kHz to the 40GHz, which above 2th Harmonics are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. The measurements greater than 20dB below the limit from 9kHz to 30MHz.. Report No.: STR18088348I Page 18 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 5. Out of Band Emissions 5.1 Standard Applicable Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. 5.2 Test Procedure As the radiation test, set the Lowest and Highest Transmitting Channel, observed the outside band of 5725MHz to 5875MHz, than mark the higher-level emission for comparing with the FCC rules. 5.3 Summary of Test Results/Plots Frequency Limit Test mode Result MHz dBuV / dBc Lowest 5725 <54 dBuV Pass Highest 5875 <54 dBuV Pass The edge emissions are below the FCC 15.209 Limits or complies with the 15.249 requirements. Please refer to the test plots as below. Test Channel Low Polarity: Horizontal (worst case) No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) 1 5725.000 45.19 -1.52 43.67 54.00 -10.33 Ave Detector 5725.000 58.78 -1.52 57.26 74.00 -16.74 Peak Detector Test Channel High Polarity: Horizontal (worst case) No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) 1 5875.000 38.88 -1.25 37.63 54.00 -16.37 Ave Detector 5875.000 52.05 -1.25 50.80 74.00 -23.20 Peak Detector Report No.: STR18088348I Page 19 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 6. Emission Bandwidth 6.1 Standard Applicable According to 15.215 (c), intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. The requirement to contain the designated bandwidth of the emission within the specified frequency band includes the effects from frequency sweeping, frequency hopping and other modulation techniques that may be employed as well as the frequency stability of the transmitter over expected variations in temperature and supply voltage. If a frequency stability is not specified in the regulations, it is recommended that the fundamental emission be kept within at least the central 80% of the permitted band in order to minimize the possibility of out-of-band operation. 6.2 Test Procedure According to the ANSI 63.10-2013, the emission bandwidth test method as follows. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. Set span = 1MHz, centered on a transmitting channel RBW ≥1% 20dB Bandwidth, VBW ≥RBW Sweep = auto Detector function = peak Trace = max hold All the trace to stabilize, use the marker-to-peak function to set the marker to the peak of the emission, use the marker-delta function to measure and record the 20dB down and 99% bandwidth of the emission. 6.3 Summary of Test Results/Plots Test Channel 20dB Bandwidth(kHz) Low Channel 3537 Middle Channel 3531 High Channel 3717 Please refer to the following test plots Report No.: STR18088348I Page 20 of 24 FCC Part 15.249

Model: Ready 2 Taik BT3 % Aqllent ROT TraceMew Trace 2 3 VBW 100.0000000 kHz [r Clear Wiite Ref 0 dBm Atten 10 4B a #Peak Log Max Hold 10 aB Low Channel Min Hold Center 5731 GHz Span 10 MHz view #Res BW 100 kiz #viBw 100 kiz Sweep 4 ms (01 — Occupied Bandwidth Oce BW % Pur se 00 % Blank 3 3077 MHZ x8 20.00 d8 [ Transmit Freq Ervor 1 806 kiz More x 08 Bangth 3.607 Mz 1 of2 @ Adllent R T. Traceiew Trace 2 3 Center 5.773000000 GHz [r Clear Wiite Ref 0 dBm Atten 10 4B a #Peak Log Max Hold 10 . ab Middle Channel Min Hold Center 5773 GHz Span 10 MHz view #Res BW 100 kiz #viBw 100 kiz Sweep 4 ms (01 — Occupied Bandwidth Oce BW % Pur se 00 % Blank 3 3006 MHZ x8 20.00 d8 [ Transmit Freq Ervor "18 043 k More x 08 Bangth 3601 Mz 1 of2 _ Aglent R_T Trace/Mew Trace Center 5.820000000 GHz [r Clear Wiite Ref 0 dBm Atten 10 4B a #Peak Log Max Hold 10 . ab High Channel Min Hold Center 5.82 GHz Span 10 MHz view #Res BW 100 kiz #viBw 100 kiz Sweep 4 ms (01 — Occupied Bandwidth Oce BW % Pur se 00 % Blank 3 2722 MHZ x8 20.00 d8 [ Transmit Freq Ervor 37 201 k More x 08 Bangth 3.717 Mz 1 of2 Report No.: STR180883481 Page 21 of 24 FCC Part 15.249

I7] Test Model: Ready 2 Taik BT3 7. Conducted Emissions 7.1 Test Procedure The setup of EUT is according with per ANSI C63.10—2013 measurement procedure. The specification used was with the FCC Part 15.207 Limit. The external O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. 7.2 Basic Test Setup Block Diagram Adapter EUT LISN o 3 To Receiver Non—conduction table 80 cm above Ground Plane t .5 m o 7.3 Test Receiver Setup During the conducted emission test, the test receiver was set with the following configurations: STATE FTEQUENCY 222220 0snn enenenenenenenereneneree veverrerennenen enc 150 kHz Stop Frequency ... Sweep Speed . IF Bandwidth.... Quasi—Peak AdgPte® BANWiGI ........2 0000000 eeremreremmenreene 9 kHz QUASi—PCAK AdBPICT MOGG ........22.00000 0000 en en n en rrnene Normal 74 Summary of Test Results/Plots Report No.: STR180883481 Page 22 of 24 FCC Part 15.249

I7] TEST Model: Ready 2 Taik BT3 Test Mode | Communication AC120V 60Hz Polarity: Neutral dBuV Limit: — Limit2: 0.150 0.5 30.0 MHz No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV) (dBuV) (dB) 1 0.1660 37.76 10.11 47.87 65.16 —17.29 aP 2 0.4060 34.32 10.25 44.57 57.73 —13.16 aP 3* 0.4380 27.06 10.27 37.33 47.10 —9.77 AVG 4 0.8740 32.71 10.45 43.16 56.00 —12.84 aP 5 0.8740 21.98 10.45 3243 46.00 —13.57 AVG 6 1.2780 19.18 10.53 29.71 46.00 —16.29 AVG Report No.: STR180883481 Page 23 of 24 FCC Part 15.249

I7] TEST Model: Ready 2 Taik BT3 | Test Mode | Communication AC120V 60Hz Polarity: Line 80.0 dBu¥ Limit1: 0.5 30.0 MHz No. Frequency Reading Correct Result Limit Margin Detector (MHz) (dBuV) (dB/m) (dBuV) (dBuV) (dB) 0.1660 37.79 10.11 47.90 65.15 —17.25 aP 0.1700 21.07 10.11 31.18 54.96 —23.78 AVG 0.4100 33.97 10.25 44.22 57.65 —13.43 aP 4* 0.4100 24.29 10.25 34.54 47.65 13.11 AVG 5 0.7820 30.59 10.42 41.01 56.00 —14.99 aP 6 0.8740 18.38 10.45 28.83 46.00 17.17 AVG Report No.: STR180883481 Page 24 of 24 FCC Part 15.249


Document Created: 2019-09-10 00:50:06
Document Modified: 2019-09-10 00:50:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC