User Manual

FCC ID: 2AR8O-BSD01WS

Users Manual

Download: PDF
FCCID_4247994

Manual Dimensions (Unit：mm) Installation instructions Choose the appropriate installation location, and choose one of the following installation methods 15 according to the site environment. Method 1 (Direct installation) 1.Select the appropriate mounting location and attach the positioning sticker to the installation location. 2.Compare the positions of the four fixed holes (1, 2, 3, 4 fixing holes as shown in Figure 1), opening a hole in the wall (recommended aperture 7mm, depth 35m) , Insert the plastic expansion rubber plug into the hole to remove the positioning sticker. 3.Connect the reserved cable to the device. 275 4.Open the cover (recommended by suction cup or plastic cymbal), screw the four screws (M4*40) into the expansion plug to secure the device to the wall. 5.Reinstall the cover back into the device. Method 2 (86 box installation) 1.Install 86 boxes of repairs in 86 boxes. 2.Connect the reserved cable to the device. 3.Open the cover (recommended by suction cup or plastic cymbal), screw the screws (M4*45) into 145 106 the four screw holes (as shown in Figures 2, 5, 6, 7, 8) to ensure that the device is fixed to the 86 box. 4.Reinstall the cover back into the device. Cover Installation method 1 Installation method 2 Rotatable Angle：90°~65°,-35°~35° 86 boxes of repair 1 2 5 60mm 6 8 7 Fixed hole 25° 86box Figure 2 3 4 Alarm button Positioning sticker 35° 35° The height line of camera 安装贴纸：将该贴纸贴到要安装的位置，根据图标来做打孔，布线等操作。 279-00127-01 Power on Figure 1 Figure 3 Figure 4

Port Description Specification Product N umb er BRD-WS-SD1 Living Secur ity Support WG_D0_O 30-180cm Recognition D i s ta nc e WG_D1_O Ver if ica tion M et hod 1:1, 1:N, 1:1/1:N GND WG_D0_I Fa ce Compa r is o n T i m e 1:NC o m pa r i s o n T i m e≤0.3second/person WG_D1_I Ca pa city 20000 GND OS Android 7.0 Relay_NC Ca mer a Professional Wide-angle Dual Camera (Visible Light & Infrared) LAN Relay_NO Relay_COM Displa y 8.0inch Touch LCD，800*1280 Multi-touch Support RS232_TX Ta mper a la rm Support Audio RS232_RX Oper a ting te mp e r a ture -10℃ ~ 55℃ GND Rela tive Hum i di ty 5%-95%(Non-condensing) RS485_B RS485_A Dimensions 145*106*275mm GND Powe r Cord R a ti ng DC 12V 3A TTL +12VDC 2.4 GHz/5 GHz（5.15GHz-5.25GHz;5.725GHz-5.825GHz）， USB Wi-Fi IN IEEE 802.11a/g/b/n；IEEE 802.11ac Communica ti o n Met ho d Bluetooth BT4.1+BLE Ethernet Support RS232*1，USB2.0*1，RS485*1，Audio Jack*1，Wiegand TX*1， Phy sica l Inter fa c e Wiegand RX*1，Relay*1， RJ45*1 Powe r On Support Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: Position This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm Adapt to height range between the radiator& your body. H (cm) W (cm) Screen rotation Recognizable This transmitter must not be co-located or operating in conjunction with any other antenna or angle height L(cm) transmitter. 50 90° 126-157 Note: This equipment has been tested and found to comply with the limits for a Class B digital 75° 140-170 device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 65° 150-192 protection against harmful interference in a residential installation. This equipment generates 90° 112-162 uses and can radiate radio frequency energy and, if not installed and used in accordance with 150 70 75° 132-188 the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 65° 151-217 cause harmful interference to radio or television reception, which can be determined by turning H 90° 102-172 L 90 the equipment off and on, the user is encouraged to try to correct the interference by one or 75° 128-202 more of the following measures: 65° 151-251 —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is w connected. —Consult the dealer or an experienced radio/TV technician for help. © 2018 Beijing Beebox Technology Co.,Ltd. all rights reserved. Printed in China. 317-00486-01


Document Created: 2019-04-23 06:03:17
Document Modified: 2019-04-23 06:03:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC