User Manual

FCC ID: 2AR8O-BSD01ST

Users Manual

Download: PDF
FCCID_4245108

Manual Rotatable Angle：96°~65° Installation instructions 1.Please confirm that the expansion bolt is suitable for the current ground environment. 6° 2.Attach the positioning sticker to the installation location. 25° 3.The four positioning holes on the corresponding sticker are opened at the mounting position (recommended aperture 10mm, depth 70mm), used to fix expansion bolts and remove positioning stickers. 4.Unscrew the five screws on the bottom plate to remove the bottom plate and fix the four expansion bolts and the bottom plate to the ground. 5.Place the base and the weight in the position corresponding to the bottom plate, fix the four weight fixing screws (M4*18) together. 6.Fix the four counterweight cover fixing screws (M4*10) with the weights. Expansion bolt Counterweight cover Counterweight Base Counterweight cover fixing screw Counterweight 100-240V~/1.5A/50-60Hz Audio LAN USB + - fixing screw Power Positioning Sticker bottom plate Bottom plate screw Dimensions (Unit：mm) Port Description Relay_NC GND Relay_NO WG_D1_I Relay_COM WG_D0_I GND WG_D1_O WG_D0_O 1270 Relay Wiegand RS232 RS485 RS232 +12VDC IN GND RS232_RX_2 RS232_TX_2 100-240V~/1.5A/50-60Hz GND Audio LAN USB + - RS485_A RS485_B Power GND RS232_RX_1 RS232_TX_1 305 170

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. Position This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) Adapt to height range %\ . this device must accept any interference received, including interference that may Distance from person t0 |gcrsen rotation Recognizable cause undesired operation. identification terminal W(cm) angle height L(cm) 90° 126—157 FCC Radiation Exposure Statement: 50 750 140—170 65° 150—192 This equipment complies with FCC radiation exposure limits set forth for an 90° 112—162 uncontrolled environment. This equipment should be installed and operated with 70 75° 132—188 minimum distance 20cm between the radiator& your body. 65° 151—217 This transmitter must not be co—located or operating in conjunction with any other 90° 102—172 antenna or transmitter. 90 750 128—202 65° 151—251 (c > Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not Specification installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not Product Number BRD—ST—SD1 occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off Living Security Support and on, the user is encouraged to try to correct the interference by one or more of the Recognition Distance 30—180cm following measures: Verification Method 1:1, 1:N, 1:1/1;N Face Comparison Time |1:N Comparison Time<0.3s/p —Reorient or relocate the receiving antenna. Capacity 20000 —Increase the separation between the equipment and receiver. oS Android 7.0 Camera Professional Wide—angle Dual Camera (Visible Light & Infrared) —Connect the equipment into an outlet on a circuit different from that to which the Display 8.0inch Touch LCD , 800*1280 receiver is connected. Operating temperature —10°C ~55°C —Consult the dealer or an experienced radio/TV technician for help. Relative Humidity 5%—95%(Non—condensing) Dimensions 305*170*1270 mm Power Cord Rating DC 12V 3A or AC 100—240V~/1.5A/50—60Hz 2. 24 GHz/5 GHz ( 515GHz—5.25GHz;5.725GHz—5.825GHz ) , Wi—Fi IEEE 802.11a/g/b/n ; IEEE $02.11ac Communication Method Bluetooth BT4.1+BLE Ethernet Support RS232*2 , USB2.0*1 , RS485*1 , Audio Jack*1 , RJ45*1 , Wiegand TX*1 Physical Interface , Wiegand RX*1 , Relay*1 Power On Support © 2018 Beijing Beebox Technology Co.,Ltd. all rights reserved. Printed in China. 317—00488—01


Document Created: 2019-04-19 12:41:37
Document Modified: 2019-04-19 12:41:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC