Test report

FCC ID: 2AR7W-WL013

Test Report

Download: PDF
FCCID_4333869

FCC TEST REPORT FCC ID: 2AR7W-WL013 On Behalf of Shenzhen BNY Industrial Co., Ltd Wireless Charger Model No.: WL-013 Prepared for : Shenzhen BNY Industrial Co., Ltd Room.803. Xingduli Business Building, Longgang Street, Address : Longgang District, Shenzhen, 518103, China Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Building i, No.2, Lixin Road, Fuyong Street, Bao'an District, Address : 518103, Shenzhen, Guangdong, China Report Number : T1905290-C01-R05 Date of Receipt : May 28, 2019 Date of Test : May 28-June 14, 2019 Date of Report : June 15, 2019 Version Number : V0

Page 2 of 30 Report No.: T1905290-C01-R05 TABLE OF CONTENTS 1. Test Result Summary .............................................................................. 5 2. General Information................................................................................. 6 2.1. DESCRIPTION OF DEVICE (EUT) ............................................................................................................. 6 2.2. ACCESSORIES OF DEVICE (EUT)............................................................................................................ 7 2.3. TESTED SUPPORTING SYSTEM DETAILS ................................................................................................. 7 2.4. BLOCK DIAGRAM OF CONNECTION BETWEEN EUT AND SIMULATORS ....................................................... 7 2.5. DESCRIPTION OF TEST MODES ............................................................................................................... 7 2.6. TEST CONDITIONS ................................................................................................................................. 7 2.7. TEST FACILITY ...................................................................................................................................... 8 2.8. MEASUREMENT UNCERTAINTY ............................................................................................................... 8 2.9. TEST EQUIPMENT LIST ........................................................................................................................... 9 3. Test Results and Measurement Data ................................................... 10 3.1. CONDUCTED EMISSION ........................................................................................................................ 10 3.2. RADIATED SPURIOUS EMISSION MEASUREMENT ................................................................................... 14 3.3. OCCUPIED BANDWIDTH ........................................................................................................................ 21 4. Photos of test setup .............................................................................. 23 5. Photographs of EUT .............................................................................. 25

Page 3 of 30 Report No.: T1905290-C01-R05 TEST REPORT DECLARATION Applicant : Shenzhen BNY Industrial Co., Ltd Room.803. Xingduli Business Building, Longgang Street, Longgang Address : District, Shenzhen, 518103, China Manufacturer : Shenzhen BNY Industrial Co., Ltd Room.803. Xingduli Business Building, Longgang Street, Longgang Address : District, Shenzhen, 518103, China EUT : Wireless Charger Description (A) Model No. : WL-013 (B) Trademark : N/A Measurement Standard Used: FCC CFR Title 47 Part 15 Subpart C Section 15.209 The device described above is tested by Shenzhen Alpha Product Testing Co., Ltd. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The test results are contained in this test report and Shenzhen Alpha Product Testing Co., Ltd. is assumed full responsibility for the accuracy and completeness of test. Also, this report shows that the EUT is technically compliant with the FCC CFR Title 47 Part 15 Subpart C Section 15.209 requirements. This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Shenzhen Alpha Product Testing Co., Ltd. Lucas Pang Tested by (name + signature)........…..: Project Engineer Simple Guan Approved by (name + signature)…....: Project Manager Date of issue…… …………………..: June 15, 2019

Page 4 of 30 Report No.: T1905290-C01-R05 Revision History Revision Issue Date Revisions Revised By V0 June 15, 2019 Initial released Issue Simple Guan

Page 5 of 30 Report No.: T1905290-C01-R05 1. Test Result Summary Requirement CFR 47 Section Result Antenna requirement §15.203 PASS AC Power Line Conducted §15.207 PASS Emission Spurious Emission §15.209(a)(f) PASS Occupied Bandwidth §15.215 (c) PASS Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard.

Page 6 of 30 Report No.: T1905290-C01-R05 2. General Information 2.1. Description of Device (EUT) EUT Name : Wireless Charger Model No. : WL-013 DIFF. : N/A Trademark : N/A Power supply : Micro USB/Type-C PD Input: DC 5.3V/2A, 9V/2A(QC2.0), 12V2A(QC3.0) QI Output: 5V/1A (Max 5W), 5V/1.5A (Max 7.5W), 9V/1.12A (Max 10W), 9V/1.67A (Max 15W) Operation frequency : 125-205KHz Modulation : MSK Antenna Type : Coil Antenna, Maximum Gain is 4dBi Software version : V1.0 Hardware version : V1.0 Note : N/A

Page 7 of 30 Report No.: T1905290—C01—RO5 2.2. Accessories of Device (EUT) Accessories1 : / Manufacturer / Model i0 4 Ratings / 2.3. Tested Supporting System Details No. Description Manufacturer Model Serial Number Certlfécggon or Load —— —— —— —— 2 Adapter YIBOYUAN QCO8 —— —— 2.4. Block Diagram of connection between EUT and simulators Load EUT [~7 Adapter p» AC 120V/60Hz 2.5. Description of Test Modes Channel Fr‘i%‘fz’;cy Channel Fr‘i%‘fz';cy Channel Fr?fl‘i‘_fi;cy Channel Fr?fl:‘i’;cy 1 125 6 150 11 175 16 200 2 130 7 155 12 180 17 205 3 135 8 160 13 185 18 4 140 9 165 14 190 19 5 145 10 170 15 195 20 Note: Pre—San all output power mode, and only worst data listed in report (DC 5V/1A). 2.6. Test Conditions Items Required Actual Temperature range: 15—35°C 27°C Humidity range: 25—75% 56% Pressure range: 86—106kPa 980kPa

Page 8 of 30 Report No.: T1905290-C01-R05 2.7. Test Facility Shenzhen Alpha Product Testing Co., Ltd Building i, No.2, Lixin Road, Fuyong Street, Bao'an District, 518103, Shenzhen, Guangdong, China June 21, 2018 File on Federal Communication Commission Registration Number: 293961 July 25, 2017 Certificated by IC Registration Number: 12135A 2.8. Measurement Uncertainty (95% confidence levels, k=2) Item MU Remark Uncertainty for Conducted Emission Test 2.74dB Uncertainty for Radiation Emission test in 3m chamber 3.77dB Polarize: V (30MHz to 1GHz) 3.80dB Polarize: H Uncertainty for Radiation Emission test in 3m chamber 4.16dB Polarize: H (1GHz to 25GHz) 4.13dB Polarize: V Uncertainty for radio frequency 5.4×10-8 Uncertainty for conducted RF Power 0.37dB

Page 9 of 30 Report No.: T1905290-C01-R05 2.9. Test Equipment List Equipment Manufacture Model No. Serial No. Last cal. Cal Interval 3m ETS-LINDGREN N/A SEL0017 2018.09.21 1Year Semi-Anechoic Spectrum Agilent E4407B MY46185649 2018.09.21 1Year analyzer Receiver R&S ESCI 1166.5950K03-1011 2018.09.21 1Year Receiver R&S ESCI 101202 2018.09.21 1Year Bilog Antenna Schwarzbeck VULB 9168 VULB9168-438 2018.04.13 2Year Active Loop SCHWARZBEC FMZB 1519B 00059 2018.09.26 2Year Antenna K Cable Resenberger N/A No.1 2018.09.21 1Year SCHWARZBEC Cable N/A No.2 2018.09.21 1Year K SCHWARZBEC Cable N/A No.3 2018.09.21 1Year K Pre-amplifier Schwarzbeck BBV9743 9743-019 2018.09.21 1Year AFS33-18002650- Pre-amplifier R&S SEL0080 2018.09.21 1Year 30-8P-44 Temperature Terchy MHQ 120 2018.09.21 1Year controller L.I.S.N.#1 Schwarzbeck NSLK8126 8126466 2018.09.21 1Year ROHDE&SCHW L.I.S.N.#2 ENV216 101043 2018.09.21 1 Year ARZ 20db Attenuator ICPROBING IATS1 82347 2018.09.21 1 Year

Page 10 of 30 Report No.: T1905290-C01-R05 3. Test Results and Measurement Data 3.1. Conducted Emission 3.1.1. Test Specification Test Requirement: FCC Part15 C Section 15.207 Test Method: ANSI C63.10:2013 Frequency Range: 150 kHz to 30 MHz Receiver setup: RBW=9 kHz, VBW=30 kHz, Sweep time=auto Frequency range Limit (dBuV) (MHz) Quasi-peak Average Limits: 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 Test Setup: Test Mode: Charging + Transmitting Mode 1. The E.U.T is connected to an adapter through a line impedance stabilization network (L.I.S.N.). This provides a 50ohm/50uH coupling impedance for the measuring equipment. 2. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please Test Procedure: refer to the block diagram of the test setup and photographs). 3. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.10: 2013 on conducted measurement. Test Result: PASS

Page 11 of 30 Report No.: T1905290-C01-R05 3.1.2. Test data Please refer to following diagram for individual Test Mode : Full load, Half load, No load Test Results : PASS Note: The test results are listed in next pages. This mode is worst case mode, so this report only reflected the worst mode. If the limits for the measurement with the average detector are met when using a receiver with a peak detector, the test unit shall be deemed to meet both limits and the measurement with the average detector and quasi-peak detector need not be carried out. If the limits for the measurement with the average detector are met when using a receiver with a quasi-peak detector, the test unit shall be deemed to meet both limits and the measurement with the average detector need not be carried out.

80.0 dBuV 70 FCC Part 15 CLASS B OP 60 1 FCC Part 15 CLASS B AV 50 2 8 ao (f & |‘| h | H f 20 ty ou + lave ""m“l 10 o0 0.150 as CoB] 5 30.000 Reading Correct Measure— . . No. Mk. Freq. Level Factor ment Limit Margin MHz dBuy 8 dBuv dBuy dB Detector Comment 1 0.1620 41.86 9.63 51.49 65.36 —13.87 peak 2 0.3060 35.85 9.66 45.51 60.08 —14.57 peak 3 * 0.4800 33.77 9.68 43.45 56.34 —12.89 peak 4 3.5010 29.82 9.96 39.78 56.00 —16.22 peak 5 15.1710 35.86 10.15 46.01 60.00 —13.99 peak 6 29.9280 35.99 10.55 46.54 60.00 —13.46 peak

o 0o aowr 70 ree par 15 cuass s ar so 1 ree Par 15 cuass 8 Av so 3 s mo a s peok 2o lave 10 Uo a 150 as it 5 30 on Reading Correct Measure: No. Mc Freg. Level Factor ment Limit Margin Miz douy «8 dBuv dBuv dB Detecr Comment 1 0.1080 40.94 903 50.57 65.00 —14.49 peuk 2 5o 04830 3443 968 4411 5020 1218 peak 3 18860 3121 982 4103 56.00 —14.97 peak a Tomo 2734 1013 3747 60.00 2253 pesk 5 267210 3155 1038 41.93 60.00 —16.07— pesk 6 20.0250 3487 1055 4542 60.00 —14.58— peak

Page 14 of 30 Report No.: T1905290-C01-R05 3.2. Radiated Spurious Emission Measurement 3.2.1. Test Specification Test Requirement: FCC Part15 C Section 15.209 Test Method: ANSI C63.10: 2013 Frequency Range: 9 kHz to 25 GHz Measurement Distance: 3m Antenna Polarization: Horizontal & Vertical Operation mode: Refer to item 4.1 Frequency Detector RBW VBW Remark 9kHz- 150kHz Quasi-peak 200Hz 1kHz Quasi-peak Value 150kHz- Quasi-peak 9kHz 30kHz Quasi-peak Value Receiver Setup: 30MHz 30MHz-1GHz Quasi-peak 100KHz 300KHz Quasi-peak Value Peak 1MHz 3MHz Peak Value Above 1GHz Peak 1MHz 10Hz Average Value Field Strength Measurement Frequency (microvolts/meter) Distance (meters) 0.009-0.490 2400/F(KHz) 300 0.490-1.705 24000/F(KHz) 30 1.705-30 30 30 30-88 100 3 88-216 150 3 Limit: 216-960 200 3 Above 960 500 3 Measurement Field Strength Frequency Distance Detector (microvolts/meter) (meters) 500 3 Average Above 1GHz 5000 3 Peak For radiated emissions below 30MHz Test setup: 30MHz to 1GHz

Page 15 of 30 Report No.: T1905290-C01-R05 Above 1GHz 1. For the radiated emission test below 1GHz: The EUT was placed on a turntable with 0.8 meter above ground. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of a variable height antenna tower. The EUT was arranged to its worst case and then tune the antenna tower (from 1 m to 4 m) and turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high PASS filter are used for the test in order to get better signal level. For the radiated emission test above 1GHz: Place the measurement antenna on a turntable with Test Procedure: 1.5 meter above ground, which is away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which

Page 16 of 30 Report No.: T1905290-C01-R05 maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. 2. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor = Level 3. For measurement below 1GHz, If the emission level of the EUT measured by the peak detector is 3 dB lower than the applicable limit, the peak emission level will be reported. Otherwise, the emission measurement will be repeated using the quasi-peak detector and reported. 4. Use the following spectrum analyzer settings: (1) Span shall wide enough to fully capture the emission being measured; (2) Set RBW=100 kHz for f < 1 GHz; VBW ≥RBW; Sweep = auto; Detector function = peak; Trace = max hold; (3) Set RBW = 1 MHz, VBW= 3MHz for f  1 GHz for peak measurement. For average measurement: VBW = 10 Hz, when duty cycle is no less than 98 percent. VBW ≥ 1/T, when duty cycle is less than 98 percent where T is the minimum transmission duration over which the transmitter is on and is transmitting at its maximum power control level for the tested mode of operation. Test mode: Refer to section 4.1 for details Test results: PASS

Page 17 of 30 Report No.: T1905290-C01-R05 3.2.2. Test Data Please refer to following diagram for individual Frequency : 9KHz~30MHz Range Test Mode : TX: channel low, channel mid, channel high Test Results : PASS Note: 1. The test results are listed in next pages. 2. This mode is worst case mode, so this report only reflected the worst mode. 3. If the limits for the measurement with the average detector are met when using a receiver with a peak detector, the test unit shall be deemed to meet both limits and the measurement with the quasi-peak detector need not be carried out. Antenna Cable Amp Freq. Reading Result Limit Margin State Factor loss Factor Detect (dBuV/m) or (MHz) (dBuV/m) dB/m dB dB (dBuV/m) (dB) P/F at 3 m 0.125 24.06 48.34 0.16 29.87 42.69 126.77 -84.08 PK PASS 0.125 19.23 48.34 0.16 29.87 37.86 106.77 -68.91 AV PASS 0.175 92.25 48.34 0.16 29.87 110.88 122.95 -12.07 PK PASS 0.175 69.39 48.34 0.16 29.87 88.02 102.95 -14.93 AV PASS 0.205 49.39 48.38 0.17 29.89 68.05 120.76 -52.71 PK PASS 0.205 46.56 48.38 0.17 29.89 65.22 100.76 -35.54 AV PASS 0.35 44.62 48.44 0.19 29.89 63.36 117.78 -54.42 PK PASS 0.35 42.46 48.44 0.19 29.89 61.20 97.78 -36.58 AV PASS 0.45 45.49 48.47 0.19 29.89 64.26 115.35 -51.09 PK PASS 0.45 42.27 48.47 0.19 29.89 61.04 95.35 -34.31 AV PASS 1.928 18.48 49.12 0.2 29.94 37.86 60 -22.14 QP PASS 1.920 21.69 49.12 0.2 29.94 41.07 60 -18.93 QP PASS

Page 18 of 30 Report No.: T1905290-C01-R05 Frequency : 30MHz~1000MHz Range Test Mode : Full load, Half load, No load Test Results : PASS Note: 1. The test results are listed in next pages. 2. This mode is worst case mode, so this report only reflected the worst mode. 3. If the limits for the measurement with the average detector are met when using a receiver with a peak detector, the test unit shall be deemed to meet both limits and the measurement with the quasi-peak detector need not be carried out. Frequency : Above 1GHz Range EUT : / Test Date : / M/N : / Temperature : / Test Engineer : / Humidity : / Test Mode : / Test Results : N/A 1. The highest frequency of the internal sources of the EUT is less than 108 MHz, Note: the measurement shall only be made up to 1 GHz. So the frequency rang above 1GHz radiation test not applicable.

Page 19 of 30 Report No.: T1905290-C01-R05 Test result for Channel 125KHz, AC 120V/ 60Hz(Full Load Mode) 30MHz-1GHz Horizontal:

Page 20 of 30 Report No.: T1905290-C01-R05 Vertical: Note: Emission Level=Peak Reading + Correction Factor; Correction Factor= Antenna Factor + Cable loss – Pre-amplifier

Page 21 ot 30 Regon No: TH9ose00—Gor. h05 3.3. Occupied bandwidth 3.3.1. Test Specification Test Requirement: FCG Part15 G Section 15.215() Test Method: AANS! Cos. 1o: 2013 Limit: NA 7. According To Ins falow Test—selup, keep Ine relalive position between the artficial antennaand the EUT. 2. Set to the maximum power selting and enable the EUT transmit continuously. 3. Use the following spectrum analyzer sefings for Test Procedure: 2008 Bandwidih measurement. Span = approximately 2 to 3 times the 20 dB bancividth, centered on a hopping channel; RBW= 1%of the 20 dB bandwicth; VBW=RBW; Sweep = auto; Detector function = peak; Trace = max hold. 4. Measure and record the results in the test report Test setup: CHl——s3 SpectrumAnabyzer Test Mode: Refer to section 4.1 for details Test results: PASS

Page 22 of 30 Report No.: T1905290-C01-R05 3.3.2. Test data 20dB Occupy Frequency(KHz) Limit (kHz) Conclusion Bandwidth (kHz) 175.0 27.08 --- PASS Test plots as follows: Lowest channel

Page 23 of 30 Report No.: T1905290-C01-R05 4. Photos of test setup Radiated Emission

Page 24 of 30 Report No.: T1905290-C01-R05 Conducted Emission

Page 25 of 30 Report No.: T1905290-C01-R05 5. Photographs of EUT

Page 26 of 30 Report No.: T1905290-C01-R05

Page 27 of 30 Report No.: T1905290-C01-R05

Page 28 of 30 Report No.: T1905290-C01-R05

Page 29 of 30 Report No.: T1905290-C01-R05

Page 30 of 30 Report No.: T1905290-C01-R05 ------End------


Document Created: 2019-06-24 14:36:21
Document Modified: 2019-06-24 14:36:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC