operational Description

FCC ID: 2AR4G-HL7618RD

Operational Description

Download: PDF
FCCID_4196412

Front Back Warrior PA.710.A Specification Patent Pending Part No. PA.710.A Product Name Warrior Ultra Wide-Band LTE/Cellular/CDMA SMT Antenna For 2G/3G/4G applications LTE / GSM / CDMA /DCS /PCS / WCDMA / UMTS / HSDPA / GPRS / EDGE /IMT, 698MHz to 960MHz, 1710MHz to 2690Mhz Feature High efficiency Wide-Band Antenna Patent Pending Surface Mount Technology 40 x 6 x 5mm size RoHS Compliant SPE-12-8-126/B/EZ | page 1 of 18

1. Introduction The Warrior, the revolutionary patent techniques to deliver the highest compatibility for 2G and 3G globally on pending PA.710A is a 2G/3G/4G, efficiencies on all bands when mounted all lower and upper bands. High Efficiency SMT Ceramic antenna, on the device’s main PCB. The exceptional operating at 698MHz to 960MHz and wide-band response means it is the ideal The PA.710A is delivered on tape and reel 1710MHz to 2690MHz. It uses high grade antenna for all LTE applications that also and mounted securely during the device custom ceramic material and new design need high efficiency and backward PCB reflow process. 1.1 Key Advantages 1. Highest efficiency in a small size, 4. Easy to integrate. layout for the antenna can deliver i.e. 40mm*6mm*5mm. Other antenna designs come in natural isolation between the onboard A comparative antenna, for example irregular shapes and sizes making noise and the antenna itself. metal/FR4/FPC/whip/rod/helix, would them more difficult to integrate. have much reduced efficiency in this Also the antenna can be matched configuration due to their different 5. Surface Mount Technology better to the system with the matching dielectric constants. (Directly On-Board) circuit function. Very high efficiency antennas are antenna saves on labor, cable and critical to 3G and 4G devices ability to connector costs, leads to higher 8. High Gain in Both deliver the stated data-speed rates of integration yield rates, and reduces Polarization Planes systems such as HSPA and LTE. losses in transmission. Achieves moderate to high gain in both vertical and horizontal 2. More resistant to detuning 6. Minimum Transmission polarization planes. This feature is compared to other and Reception Losses very useful in certain wireless antenna integrations. these are kept to absolute minimum communications where the antenna If tuning is required it can be tuned resulting in much improved OTA orientation is not fixed and the for the device environment using a (over the air), i.e. TRP (Total Radiated reflections or multipath signals may matching circuit, or other techniques Power)/TIS (Total Isotropic Radiation), be present from any plane. on the main PCB itself. There is no device performance compared need for new tooling, thereby saving to similar efficiency cable and In those cases the important money if customization is required. connector antenna solutions. parameter to be considered is the This means it is an ideal antenna total field strength, which is the 3. Highly reliable and robust to be used for devices that need to vector sum of the signal from the Its predecessors the PA.25A and pass for example USA carrier horizontal and vertical polarization PA700A antennas are used by the network approvals planes at any instant in time. world’s leading automotive makers in extremely challenging environments. 7. RSE Reductions The antenna meets all temperature Will help to eliminate radiated spurious and mechanical specs required emission failures compared to other (vibration, drop tests etc) antenna technologies as the required SPE-12-8-126/B/EZ | page 2 of 18

2. Specification Electrical Antenna PA710 Warrior Standard 2G/3G/4G Operation Frequency (MHz) 698~960MHz 1710~2170MHz 2300~2400MHz 2490~2690MHz Peak Gain 1.0dBi 3.2dBi 3.5dBi 3.5dBi Average Gain -2.3 dB -1.5dB -1.8dB -1.5dB Efficiency 60% 70% 65% 70% VSWR <3.0:1 Impedance 50Ω Polarization Linear Radiation Properties Omni-directional Max Input Power 5W * The Warrior PA710 antenna performance was measured with 120x45mm ground plane. Mechanical Dimensions (mm) 40 x 6 x 5 mm Material Ceramic Termination Ag (environmental-friendly Pb free) EVB Connector SMA-Female Environmental Operation Temperature -40°C to 85°C Storage Temperature -40°C to 105°C Relative Humidity Non-condensing 65°C 95% RH RoHs Compliant Yes SPE-12-8-126/B/EZ | page 3 of 18

3. Test Set Up Y Z X Figure 1. Impedance measurements (left hand) and peak gain, average gain, efficiency and radiation pattern measurements (right hand) 4. Antenna Parameters 4.1 Return Loss Return Loss [dB]   Figure 2. Return Loss of the Warrior PA710 LTE antenna SPE-12-8-126/B/EZ | page 4 of 18

4.2 VSWR VSWR   Figure 3. VSWR of the Warrior PA710 LTE Antenna 4.3 Efficiency Efficiency [%]   Figure 4. Efficiency of the Warrior PA710 LTE Antenna SPE-12-8-126/B/EZ | page 5 of 18

4.4 Peak Gain Gain [dBi]   Figure 5. Peak Gain of the Warrior PA710 LTE Antenna 4.5 Average Gain Average Gain [dB]   Figure 6. Average Gain of the Warrior PA710 LTE Antenna SPE-12-8-126/B/EZ | page 6 of 18

4.6 3D Radiation Pattern (measured on 120*45mm EVB)   Figure 7. 3D Radiation Pattern at 700 and 800 MHz of the Warrior PA710 Antenna   Figure 8. 3D Radiation Pattern at 900 and 1700 MHz of the Warrior PA710 Antenna SPE-12-8-126/B/EZ | page 7 of 18

4.6 3D Radiation Pattern (measured on 120*45mm EVB)   Figure 9. 3D Radiation Pattern at 1805 and 1910 MHz of the Warrior PA710 Antenna   Figure 10. 3D Radiation Pattern at 1990 and 2170 MHz of the Warrior PA710 Antenna SPE-12-8-126/B/EZ | page 8 of 18

4.6 3D Radiation Pattern (measured on 120*45mm EVB)   Figure 11. 3D Radiation Pattern at 2500 and 2600 MHz of the Warrior PA710 Antenna   Figure 12. 3D Radiation Pattern at 2700 and 2800 MHz of the Warrior PA710 Antenna SPE-12-8-126/B/EZ | page 9 of 18

4.7 2D Radiation Pattern (measured on 120*45mm EVB) X Y   Z X   SPE-12-8-126/B/EZ | page 10 of 18

4.7 2D Radiation Pattern (measured on 120*45mm EVB) Z Y   Figure 13. 2D Radiation Pattern of the Warrior PA710 Antenna SPE-12-8-126/B/EZ | page 11 of 18

5. Mechanical Drawing   Figure 14. Mechanical Drawing of the Warrior PA710 Antenna. SPE-12-8-126/B/EZ | page 12 of 18

6. Layout Dimensions   Figure 15. Layout dimensions of the Warrior PA710 Antenna SPE-12-8-126/B/EZ | page 13 of 18

7. EVB Dimensions   NOTE: 1. Week Batch Code Example: 2010 Week 1=01.10 2. Soldered Area 3. Copper Area 4. Logo & Text Ink Printing : Black 5. Ground Clearance Area         Figure 16. EVB Dimensions of the Warrior PA710. SPE-12-8-126/B/EZ | page 14 of 18

8. Matching Circuit   Solder  area   L1   C1   Circuit Symbol Size Description L1 0402 5.6nH inductor (LQG15HS5N6S02D) C1 0402 4.3pF Capacitor (GRM1555C1H4R3CA01D) Figure 17. Recommended matching circuit SPE-12-8-126/B/EZ | page 15 of 18

9. Packaging Blister tape to IEC 286-3, Polyester Pieces / Tape = 450   SPE-12-8-126/B/EZ | page 16 of 18

10. Recommended Reflow Temperature Profile The PA.710 can be assembled following either Sn-Pb or Pb-Free assembly processes. The recommended soldering temperatures are as follows: Pb-Free Assembly Phase Profile Features Sn-Pb Assembly (SnAgCu) Avg Ramp-Up Rate Ramp-Up 3°C/second (max) 3°C/second (max) (Tsmax to TP) Temperature Min (Tsmin) 100°C 100°C Preheat Temperature Max (Tsmax) 150°C 150°C Time (tsmin to tsmax) 60-120 seconds 60-120 seconds Temperature (TL) 183°C 217°C Reflow Total Time Above TL b(tL) 60-150 seconds 60-150 seconds Temperature (Tp) 235°C 260°C Peak Time (tp) 10-30 seconds 20-40 seconds Ramp-Down Rate 6°C/second (max) 6°C/second (max) Time from 25°C to peak Temperature 6 minutes max 8 minutes max Temperature profile - (green area) for the assembly process in reflow ovens tp Tp Ramp-up Critical Zone TL to Tp TL Temperature Tsmax Tsmin ts Preheat Ramp-down 25° t 25°C to Peak Time Figure 18. Temperature profile for the assembly process in reflow ovens SPE-12-8-126/B/EZ | page 17 of 18

5 包裝規格 5.1 每捲料帶放置 450 天線 【450 Pieces per reel】 5.2Packaging 11. 封口時須注意不可壓到天線,裝入需平整不可雜亂 【Shrink line PE bag no push antenna and neat 】 5.3 清點每袋數量不可短缺 Pieces perone 450 【Each reel PE bags quantity not deficient 】 Shrink line PE bag no push antenna and neat Each one PE bags quantity not deficient Patent Pending XX-YY PA.710.A PA.710.A P aten t P ending X X -Y Y P A .710.A P aten t P ending X X -Y Y P A .710.A P aten t P ending X X -Y Y P A .710.A P aten t P ending X X -Y Y P A .710.A Taoglas makes no warranties based on the product descriptions at any time Reproduction, use or disclosure to third accuracy or completeness of the contents without notice. Taoglas reserves all parties without express permission is UNLESS OTHERand of this document SPECIFIED reserves theTOLERANCES right to ON： rights to this document and the strictly prohibited. X＝± make changes to X.X＝± specifications and X.XX＝ information contained herein. Copyright © Taoglas Ltd. ANGLES＝± HOLEDIA＝± SCALE： xxxx UNIT：mm DRAWN BY: Gabriel CHECKED BY: Wayne SPE-12-8-126/B/EZ | page 18 of 18 DESIGNED BY: Martin APPROVED BY: Wayne TITLE: PA.710.A SMD Antenna DOCUMENT PAGE REV.


Document Created: 2013-12-04 15:12:45
Document Modified: 2013-12-04 15:12:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC