User Manual

FCC ID: 2AR2SSHB2505

Users Manual

Download: PDF
FCCID_4170687

SHB2505





blue blue Please note that the right earpiece is the “Master device” and the left Earpiece is the “Slave” device. Before the first time use, put them into charging case to fully charge for 3 hours. Take both earpieces from the charging case, the earpiece will power on automatically. There will be a voice “Power on” and a 3 voice “Pairing”. Then, there will be a voice“ R channel” on right earpiece and “L Channel” on left earpiece after paring each other. There will be a voice “Connected” from Right Channel. Then, the master devices ( the right earpieces )

The LED on Right earpiece flashes in white and blue for 3 mins. Single earbud pairing The LED on Right earpiece flashes ( Mono mode) in white and blue for 3 mins. Take the right earpiece ("Master device" ) from the charging case, the earpiece will power on automatically. There will be a voice ”Power on” and a voice “ Pairing". Then, there will be a voice” R channel” on right earpiece. Turn on the Bluetooth function on your device, search for" Philips SHB2505” tap to connect. ( Please refer to P.6 ) There will be a voice “Connected” Once the pairing succeed, you will from both earpieces. You can use hear a voice" connected" And the your device to play music or make indicator light will be off. a call. Only Turn the “Left earpiece channel power on, it cannot connect to Bluetooth device, need to turn on “R Channel” to pair each other. 1

Take both earpieces from the charging case, the earpiece will power on and Take both reconnect automatically. earpieces from the If no device is connected, the charging earpieces will automatically turn off case, the after 3 mins earpiece will power on and reconnect automatically 5 3 times. /Left 3 and hold 2 seconds Left and hold 2 seconds

/Left white will flashe 2 times /Left per 3 mins 2 /Left once. Battery LED indicator on headset status It will show a battery indicator on Bluetooth device after connected to /Left headset. white Battery LED indicator on Charging case While charging earbud, Blue LED will light on One LED will light on for 0-25% power Two LED will light on for 25-50% power 2 Three LED will light on for 50-75% power and white Four LED will light on for 75-100% power and white will 3

Battery LED indicator on Charging case with USB cable While charging earbud, Blue LED will light on One LED will flash per second for 0-25% power Two LED will flash per second for 25-50% power Three LED will flash per second for 50-75% power Put both earpieces back to charging Four LED will flash per second for case. Hold and press left & right 75-100% power earpieces function button for 5 seconds. Take both earpieces from the charging case, the earpiece will power on automatically. There will be a voice “Power on” and a voice “ Pairing”. Then, there will be a voice“ R channel” on right earpiece and “L Channel” on left earpiece after paring each other. The LED on Right earpiece flashes in white and blue for 3 mins. There will be a voice “Connected” from Right Channel. Then, the master devices ( the right earpieces ) The LED on Right earpiece flashes in white and blue for 3 mins.

3 3 60 5.0 , AAC




put both earpieces back to charging case for 5 seconds and thak them out. put both earpieces back to charging case for 5 seconds and thak them out. and Left

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.



Document Created: 2019-01-07 16:28:10
Document Modified: 2019-01-07 16:28:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC