RF Exposure

FCC ID: 2AQXA-RMT

RF Exposure Info

Download: PDF
FCCID_4457492

FCC ID : 2AQXA-RMT Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB 447498 D01 General RF Exposure Guidance v06, section 4.3.1 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Max Antenna Gain = 2.0dBi Zigbee TX mode Pesk Output Frequency Target power Target power Calculation Threshold Power (MHz) (dBm) (mW) Value Value (dBm) 2405 4.76 4±1 3.162 0.981 3.0 2450 4.00 4±1 3.162 0.990 3.0 2480 3.27 4±1 3.162 0.999 3.0 Threshold at which no SAR required is ≤ 3.0 for 1-g SAR, Separation distance is 5mm. Conclusion: No SAR is required. SIMULTANEOUS TRANSMISSION EVALUATION N/A


Document Created: 2019-09-25 14:48:11
Document Modified: 2019-09-25 14:48:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC