SPSPRDR1-8-User-Manual-20181120

FCC ID: 2AQW8SPSPRDR1-8

Users Manual

Download: PDF

FCCID_4158927

XXXXXEVBUM

The following antennas and cables are approved for use with this reader.

- MTI MT-242025/TRH/A
- Separate 6 ft 195 series cable, RPSMA<->RPTNC
(Citrus Cables SPXTPX240-06)

- ON SPSDEVA2-P (i.e. Galtronics)
- Separate 6 ft 195 series cable, RPSMA<->RPSMA
(Citrus Cables SPXSPX195-06)

- Linx ANT-916-MHW-RPS-S
- Built-in 79" RG-174 cable w/ RPSMA termination

PRE-PUBLICATION COPY - NOT FOR DISTRIBUTION TO CUSTOMERS - PROPRIETARY

XXXXXEVBUM

18. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
19. Do not attempt to modify this product.
Doing so could result in personal injury and/or product failure.
20. Operate this product within its specified operating temperature range.
21. Protecting Against Electrostatic Discharge
Static electricity can harm delicate components inside the system.
To prevent static damage, discharge static electricity from your body
before touching any of the electronic components, such as Antenna, USB and Ethernet connectors. This can be done by
periodically touching an unpainted metal surface on the chassis.
The following steps can also be taken prevent damage from electrostatic discharge (ESD):
21.1. When unpacking a static-sensitive component from its shipping carton,
do not remove the component from the antistatic packing material
until ready to install the component in the system.
Just before unwrapping the antistatic packaging,
be sure to discharge static electricity from your body.
21.2. When transporting a sensitive component,
first place it in an antistatic container or packaging.
21.3. Handle all sensitive components in a static-safe area.
If possible, use antistatic floor pads, workbench pads and an antistatic grounding strap.
22. Equipment intended for installation in Restricted Access Location

WARNING:
No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
The safety certifications do not apply when the operating voltage is changed from the factory setting.

SPSPRDR1-8 is with compliance to IEC/EN/UL/CSA 60950 "Safety of information technology equipment"
is one of the world’s most widely-used electrical product safety standards.
Thousands of manufacturers rely on this standard to show that their products meet the safety requirements
for markets around the world.
It is one of the relatively few standards to be harmonized by standards-writing bodies globally
to make the process as efficient as possible for manufacturers.
Caution according to FCC Rule part 15.21

PRE-PUBLICATION COPY - NOT FOR DISTRIBUTION TO CUSTOMERS - PROPRIETARY

XXXXXEVBUM

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

Caution according to FCC Rule part 15.105
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.

RF exposure
Maintain a distance greater than 35 cm between the antenna of this device
and persons during device operation, which is consistent with
how the device is tested for compliance with RF exposure requirements
and satisfies Federal Communications Commission (FCC) exposure requirements.
Operations at closer than this distance are not recommended.

Instructions de sécurité importantes
Pour réduire le risque de blessures corporelles, de chocsélectriques,
d'incendie et d'endommagement de l'appareil, observez les précautions suivantes:
1. Lisez ces instructions.
2. Conservez ces instructions.
3. Faites ATTENTION à tous les avertissements.
4. Suivez toutes les instructions.
5. N'utilisez pas cet appareil près de l'eau.
6. Nettoyez uniquement avec un chiffon sec.
7. ne bloquez pas les ouvertures de ventilation.
Prévoir des distances suffisantes pour une ventilationadéquate et l'installer conformément aux instructions dufabricant.
8. Ne pas installer à proximité de sources de chaleur tellesque flammes nues, radiateurs, registres de chaleur, poêlesou autres appareils (y
compris les amplificateurs) quiproduisent de la chaleur.
Ne placez aucune source de flamme nue sur le produit.
9. ne pas vaincre le but de sécurité de la fiche de typepolarisée ou mise à la terre.
Une fiche polarisée a deux lames avec un plus large que L'autre.
Une fiche de type mise à la terre comporte deux lames etune troisième broche de mise à la terre.
La lame plus large ou la troisième broche est fournie pourvotre sécurité.
Si la fiche fournie ne rentre pas dans votre prise, consultezun électricien pour le remplacement de la prise obsolète.
10. Protégez le cordon d'alimentation de la marche ou ducoincement, en particulier au niveau des fiches, des prisesde courant et du point de
sortie de l'appareil.
11. N'utilisez que les accessoires et pièces spécifiés par lefabricant.
12. Débrancher cet appareil pendant les orages ou Lorsqu'iln'est pas utilisé pendant de longues périodes de temps.
13. Référez toutes les réparations au personnel de servicequalifié.
L'entretien est nécessaire lorsque l'appareil a étéendommagé de quelque façon que ce soit, comme le cordond'alimentation ou la fiche est
endommagé, le liquide a étérenversé ou des objets sont tombés dans l'appareil,l'appareil a été exposé à la pluie ou à l'humidité, nefonctionne
pas normalement, ou a été abandonné.
14. ne pas exposer l'appareil aux gouttes et aux éclaboussures.
Ne pas mettre d'objets remplis de liquides, tels que desvases, sur l'appareil.
15. la fiche secteur ou un coupleur d'appareils doit demeurerfacilement utilisable.
16. le bruit aérien de l'appareil ne dépasse pas 0 dB (A).
17. les appareils avec la construction de la classe I doiventêtre connectés à une prise de courant avec un raccord deterre de protection.
18. pour réduire le risque d'incendie ou de choc électrique,ne pas exposer cet appareil à la pluie ou à l'humidité.
19. N'essayez pas de modifier ce produit.
Cela pourrait entraîner des blessures corporelles et/ou unedéfaillance du produit.
20. Actionnez ce produit dans sa plage de température defonctionnement spécifiée.
21. protection contre les décharges électrostatiques
L'électricité statique peut endommager les composantsdélicats à l'intérieur du système.
Pour éviter des dommages statiques, déchargez l'électricitéstatique de votre corps avant de toucher L'un descomposants électroniques, tels que
l'antenne SMA, lesconnecteurs USB et Ethernet. Ceci peut être fait en touchantpériodiquement une surface métallique non peinte sur lechâssis.

PRE-PUBLICATION COPY - NOT FOR DISTRIBUTION TO CUSTOMERS - PROPRIETARY

XXXXXEVBUM

Smart Passive Sensor is a trademark of RFMicron, Inc.
Magnus is a registered trademark of RFMicron, Inc.
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar
classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,
damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized
use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com
Literature Distribution Center for ON Semiconductor USA/Canada
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local
Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative

PRE-PUBLICATION COPY - NOT FOR DISTRIBUTION TO CUSTOMERS - PROPRIETARY

Document Created: 2019-01-25 10:50:01
Document Modified: 2019-01-25 10:50:01

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC