Users Manual

FCC ID: 2AQQP-F01S

Users Manual

Download: PDF
FCCID_4264391

ACTIVE NOISE CANCELLATION BLUETOOTH HEADPHONE MODEL NO.: F01S SPECIFICATIONS Bluetooth working voltage: 3.3V‐4.4V Bluetooth operating current: 10mA‐20mA Frequency range: 2.402GHz‐2.480GHz Receiver sensitivity: ‐90dBm Frequency response curve: 20Hz‐20KHz Signal to noise ratio: S/N≧90dB Low power alarm: 3.15‐3.25V Shutdown voltage: 3.0V‐3.15V Charging current: 250Ma

① Bluetooth composite button ② VOL+ ③ VOL‐ ④ ANC ⑤ LED ⑥ 3.5 audio interface ⑦ USB interface ⑧ LED ⑨ Cover ⑩ Wearing ⑪ Earmuffs ⑫ Hardware set Item Part Name Specifications/functions Material Bluetooth composite 1 Switch on/off, hang up/pause, play ABS button 2 VOL+ Increase volume / switch the next song ABS 3 VOL‐ Reduce volume / switch the previous song ABS 4 ANC Turn on and off noise reduction ABS Bluetooth composite buttons and ANC turn on 5 LED and off tips 6 3.5 audio interface Connect the audio cable ABS 7 USB interface Charging ABS Charging status indicator, charging red, full of 8 LED blue 9 Cover decoration Alumina 10 Wearing Accessories Leather 11 earmuffs Accessories Protein + Cotton 12 Hardware set fixed stainless steel OPERATING INSTRUCTIONS 1. Press and hold the Bluetooth switch for about 2 seconds. The red and blue LED lights flash alternately to start Bluetooth pairing. Devices that have been connected only need to be automatically connected when they are turned on. 2. After successful pairing can be through the multi‐function power button, press the once in the communication state can answer/hang up the phone / long press can refuse to answer the phone; play music short press once "+", '"‐" button can add volume , Long press "+", "‐" to switch up and down.

3. Switch the switch to the ANC position. When the indicator light turns green, you can turn on the active noise reduction function. 4. Insert the extension cable, the Bluetooth function is automatically disconnected, and it is switched to the wired music player status. BLUETOOTH WORKING STATUS DEFINITION Item Work status The status of the light Note 1 Boot Blue light for 1 second Accompanied by English sound 2 Shutdown Red light for 1 second Accompanied by English sound Not connected 3 Red and blue lights alternately flash Accompanied by English sound (disconnected) 4 connected Blue light flashes for 6 seconds Accompanied by English sound 5 Call Blue light flashes for 6 seconds The key operation is turned off after 10 6 Play music seconds 7 Low‐power alarm Red light flashes once every 3 seconds Accompanied by English sound 8 Pairing list clear The red light is on and off Note BLUETOOTH FUNCTION OPERATION DEFINITION Functional Operation method Flash definition Sound prompt description Press and hold the multifunction Boot Blue light 1 time Power on button for 1 second Press and hold the multifunction Shutdown Red light for 3 seconds Power off button for 3 seconds Press and hold the multifunction Red and blue lights Pair Pairing button for 3 seconds flash alternately Blue light flashes for 6 Voice dialing Long press 1 second to release Sound seconds Blue light flashes for 6 Last number redial Double‐click the multifunction key Sound seconds

Answer/hang up Blue light flashes for 6 Short press multifunction key Sound the phone seconds Reject Long press function key Sound Blue light goes out Add volume Short press "+" key once Sound after 10 seconds Blue light goes out Volume reduction Short press "‐" key once In music mode after 10 seconds Blue light goes out Pause playback Short press multifunction button In music mode after 10 seconds Blue light goes out previous piece Long press "‐" key In music mode after 10 seconds Blue light goes out Next track Long press "+" key Pairing after 10 seconds The red light goes off Pairing list clear Long press "+ ‐" key No after 1 second NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.


Document Created: 2019-05-07 02:28:53
Document Modified: 2019-05-07 02:28:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC