SAR Report (2 of 3)

FCC ID: 2AQ9Z-K9VIRAATPLUS

RF Exposure Info

Download: PDF
FCCID_4091833

NTEKIE:W Accreviteo Certificate #4258.01 ~ COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref ACR.261.2.17.SATU.A Name Function Date Signature Prepared by : Jérome LUC Product Manager 9/18/2017 fi Checked by : Jérome LUC Product Manager 9/18/2017 fi Approved by: Kim RUTKOWSKI Quality Manager 9/18/2017 ;. Aurthowdh! Customer Name NTEK TESTING Distribution : TECHNOLOGY CO., LTD. Issue Date Modifications A 9/18/2017 Initial release Page: 2/10 This document shall not be reproduced, except in full orin part, without the written approvalofMYG. The information contained herein is to be used onlyfor the purpose for which it is submitted and is not to be released in whole or part without written approval ofMVG.

NTEKJL:JJ*=« KA Certificate #4298.01 ~ COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref: ACR 261217.SATUA TABLE OF CONTENTS 2 PRODUCT DESCRIPTION GENERAL INFORMATION .. ... 22222000 eenmreverermererererenereeneenennerennenerrnnrnneceeee 4 3 MEASUREMENT METHOD ........cememmemmmmeerenmenrerererereerereererrereneerenernrnenneenreeennenrenennnneenennnneenrnnnnnceene 4 321 LIN@ATitY . ccvcmmmmmemmmmccnmmmermmrmnineeremncrrrmnccenrnnnrecrennrncnrrnncenenernnennrenrearennrcvenrnsncennrncenreeenneenennnencrenenccene ns4 322. SENSIRIVITY ... ccccccencemmecneenmenereerennremrenmeneeerncvenereneeeereerneeereeneennneenneneeen se veenvevvenvensvevvenvenevenvennenvenvenvevevenvecvenn en4 3.3 LOW@P D@t@CHION LIMit ......ccscessenensennennnnncenmncerneeneeereenmenneennennenerneennenvennnennennencnnnrnnnncennenneennennenmernennencennnnccennens 5 34— ISOfTODY ... .c cccscucnncnmmmmenmennnnnrninnenmancrnenccreenenrrernmnrncinnrnncrnererrnnenvennnravrnnrenreerrnnrncervernernnennneernennnnncenmenccncens 5 3.5. BOUNG@FY EffECE ..... ... cccceceemeeneenemnerenrennnncenmnceeneenneenennenneennnnenneenernnenennenmnn en en en necvnnnnevnnvennnneenvenseneennnnc en ons 5 4 MEASUREMENT UNCERTAINTY ... 0e emeeermemeenereerrereeerennrererereeeneerereenennereenennerennnne n en nneneenenecncnnes 9 5 CALIBRATION MEASUREMENT RESULTS.... ... en m mmmmmereeerrerrnnereenrerneeeerereeennrnreneennenerennenernrnrnneceen 6 5.1 SENSIRIVIEY in &.....cccaccervcemcenmenennennmenmnnncensrncernerrerereennarneensennermerneensenvenseavennencensrnsrecervencrnnnnnneeneennencennenccensena 6 5.2 LIN@ATItY . ... ccccocsccnncrmmncermenmnnerernninnenminncrnnncereenenrrernmrrncinnrnncrnererrnnenvennsranennrennerrnnrncervenernnennneernennnnncenmenccncens 7 5.3 SENSHRIVItY 1M IIGUIG.... .cc ceceeneennenernnneneennnneeennevenereneeeerenrnnerenvenernvenerenennennennennvenrenvensrevvenvenerenvenveneenvensencennvnccenn ons 7 5.4 ISOUODY .... ccccccscennenmncenmenmrnenennanmenmnnncensrncernerrerereannarncnsennernerneennenvenseavennrncernsrnnnncerverncrnsennneenennnencennenccns en8 Page: 3/10 This document shall not be reproduced, except in full or in part, without the written approval ofMVG The information contained herem is to be used onlyfor the purposefor which it is submitted and is not to be released in whole or part without written approval ofMVG.

Mw ns C ZmOS (Accreoireo w Certificate #4298 01 ~ COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref ACR261 2.17.SATUA 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number SN 08/16 EPGO287 Product Condition (new / used) Used Frequency Range of Probe 0.4 GHz—6GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.208 MQ Dipole 2: R2=0.196 MQ Dipole 3: R3=0.196 MQ A yearly calibration interval is recommended. 2 PRODUCT DESCRIPTION GENERAL INFORMATION MVG‘s COMOSAR E field Probes are built in accordance to the IEEE 1528, OET 65 Bulletin C and CEUTEC 62209 standards. Figure 1 — MVG COMOSAR Dosimetric Efield Dipole Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip Extemnal Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEEE 1528. OET 65 Bulletin C. CENELEC ENS0361 and CEIMIEC 62209 standards provide recommended practices for the probe calibrations. including the performance characteristics of interest and methods by which to assess theiraffect. All calibrations / measurements performed meet the fore mentioned standards. 3.1 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to coverthe SAR range 0.01 W/kg to 100W/kg. 3.2 SENSIMMIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards. Page: 4/10 This document shall not be reproduced, except infull or in part, without the written approvalofMYVG. The information contained herein is to be used onlyfor the purposefor which it is submitted and is not to be released in whole or part without written approval ofMYG.

/ NTEKIE:M®&® Accreoiteo Certificate #4298.01 ~ COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref ACR261 2.17.SATUA 3.3 LOWER DETECTION LIMIT The lower detection limit was assessed using the same measurement set up as used for the linearity measurement. The required lower detection limit is 10 mW/kg. 3.4 ISOTROPY The axial isotropy was evaluated by exposing the probe to a reference wave from a standard dipole with the dipole mounted under the flat phantom in the test configuration suggested for system validations and checks. The probe was rotated along its main axis from 0 — 360 degrees in 15 degree steps. The hemispherical isotropy is determined by inserting the probe in a thin plastic box filled with tissue—equivalent liquid. with the plastic box illuminated with the fields from a half wave dipole. The dipole is rotated about its axis (0%180°) im 15° increments. At each step the probe is rotated about its axis (0°—360°). 3.5 BOUNDARY EFFECT The boundary effect is defined as the deviation between the SAR measured data and the expected exponential decay in the liquid when the probe is oriented normal to the interface. To evaluate this effect. the liquid filled flat phantom is exposed to fields fromeither a reference dipole or waveguide. With the probe normal to the phantom surface, the peak spatial average SAR is measured and compared to the analytical value at the surface. 4 MEASUREMENT UNCERTAINTY The guidelines outlined in the IEEE 1528, OET 65 Bulletin C. CENELEC EN50361 and CEIMIEC 62209 standards were followed to generate the measurement uncertainty associated with an E—field probe calibration using the waveguide technique. All uncertainties listed below represent an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. traceable to the Internationally Accepted Guides to Measurement Uncertainty. Uncertainty analysis of the probe calibration in waveguide Incident or forward power 3.00% Rectangular «E 1 1.732% Reflected power 3.00% Rectangular J}T 1 1.732% Liquid conductivity 5.00% Rectangular fi 1 2.0907% Liquid permittivity 4.00% Rectangular '\E 1 2.309% Field homageneity 3.00% Rectangular «,E 1 1.732% Field probe positioning 5.00% Rectangular '\E 1 2.007% Field probe linearity 3.00% Rectangular ,‘E 1 1.732% Combined standard uncertainty 5.831% 5656contienceJovelh22 120% Page: 5/10 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained heremn is to be used onlyfor the purposefor which it is submitted and is not to be released in whole or part without written approval ofMVG.

NT Certificate #4298.01 ~ COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref ACR.261 2.17.SATUA 5 CALIBRATION MEASUREMENT RESULTS Calibration Parameters Liquid Temperature 21 °C Lab Temperature 21 °C Lab Humidity 45 % 5.1 SENSITIVITY IN AR Normx dipole Normy dipole Normz dipole 1 (uV/(V/im)) 2 (uv/(V/im)) 3 (uV/(V/Am)) 0.69 0.78 0.61 DCP dipole 1 DCP dipole 2 DCP dipole 3 (mV) (mV) (mV) 92 90 96 Calibration curves ei=f(V) (i=1.2.3) allow to obtain H—field value using the formula: E=,]E] + E/ +E Calibration curves 674— €00 _2 500 t E—Field (Vin) 400 300 L Dipole 1 Dipole 2 200 Dipole 3 5) 100 1 0.00 0.02 0.04 0.06 0.08 Voltage (V] Page: 6/10 This document shall not be reproduced, except infull or in part, without the written approval ofMVG The information contained herein is to be used only for the purposefor which it is submitted and is not to be released in whole or part without written approval ofMVG.

NTEKIE:W «a Accreviteo Certificate #4258.01 COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref ACR 2612.17.SATUA 5.2 LINEARITY Linearity 1.00— 0.75— @ oso—~ s 025 2 o00— @ 425— 5 050— D75— 1.00—, & so 100 150 200 250 300 358 E—Field (V/m] Linearity:1+1.86% (+/0.08dB 5.3 SENSITIVITY IN LQUID Liquid Frequeney Permittivity Epsilon ($/m) ConvE (MHz 100MEz HL750 750 42.09 0.91 1.44 BL750 750 55.69 0.95 1.49 HL850 835 42.71 0.89 1.48 BL850 835 57.52 1.03 1.53 HL900 900 41.94 0.93 1.50 BL900 900 52.87 1.09 1.54 HL1800 1800 40.62 1.39 1.75 BL1800 1800 33.22 1.47 1.79 HL1900 1900 41.22 1.37 2.00 BL1900 1900 50.99 1.52 2.07 HL2000 2000 40.39 1.36 1.93 BL2000 2000 54.39 1.54 1.99 HL2450 2450 40.46 1.87 218 BL2450 2450 54.62 1.95 2.27 HL2600 2600 38.46 2.01 2.15 BL2600 2600 51.98 2.16 219 HL5200 5200 35.14 4.74 2.37 BL5200 5200 49.01 5.27 246 HL5400 5400 34.52 4.77 2.33 BL5400 5400 49.67 5.45 241 HL5600 5600 37.08 5.03 247 BL5600 5600 47.57 5.69 2.54 HL5800 5800 34.64 5.19 2.51 BLS800 5800 49.82 5.94 2.57 LOWER DETECTION LIMIT: 7mW/kg Page: 7/10 This document shall not be reproduced, except in full orin part, without the written approval ofMVG. The information contained herem is to be used onlyforthe purposeforwhich it is submitted and is not to be released in whole or part withoutwritten approval ofMVG.

NT Accreviteo Certificate #4298.01 ~ ‘ COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref ACR261 2.17 SATUA 54 ISOTROPY HL900 MHz — Axial isotropy: 0.05 dB — Hemispherical isotropy: 0.06 dB Isotropy curves s at Dipoleaid" s as en Dipolecr4u a2 ao a2 as a¢ a * Te as as on dz do o2 o+ os ns 1b HL1800 MHz — Axial isotropy: 0.05 dB — Hemispherical isotropy: 0.08 dB Isotropy curves 10— o Dipole ard" as (oess as Dipole ar4u a2 «o a as as a 10 4 4o ds as o6 42 ob o2 oe os ns 10 Page: 8/10 This document shall not be reproduced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purposefor which it is submitted and is not to be released im whole or part without written approval ofMVG.

NT Accreviteo Certificate #4298.01 ~ COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref ACR261 2.17.SATUA HL5600 MHz — Axial isotropy: 0.06 dB — Hemispherical isotropy: 0.08 dB isotrapy curves 10— as Dicot s10° as Dipot at30 Digole a1edr a Cinot a190 a ao a a as a 10. \ 4e as as m« az on oz o# o6 na 10 Page: 9/10 This document shall not be reproduced, except infull or in part, without the written approvalofMVG. The information contained herein is to be used onlyfor the purposefor which it is submitted and is not to be released m whole or part without written approval ofMVG

NTEKJILiW)*=« in z7e Accreviteo ///’f\\\p Certificate #4298.01 COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref: ACR.261.2.17.SATU.A 6 LIST OF EQUIPMENT Equipment Summary Sheet Equipment Manufacturer / Identification No Current Next Calibration Description Model ‘| Calibration Date Date Flat Phantom mve sN—2009—sam7z1 |Validated. required. No cal Validated. required. No cal |COMOSAR Test Bench] Version 3 NA Validated. required. No cal Validated. required. No cal Network Analyzer Rh°4®Z&Vimwarz sN100132 o22018 022019 Reference Probe MVG EP 94 SN 37/08 10/2016 10/2017 Multimeter Keithley 2000 1188656 01/2017 01/2020 Signal Generator Agilent E4438C MY49070581 01/2017 01/2020 Amplifier Aethercomm SN 046 Characterized prigr to |Characterized pri_or to test. No cal required. |test. No cal required. Power Meter HP E4418A US38261498 01/2017 01/2020 Power Sensor HP ECP—E26A US37181460 01/2017 01/2020 Narda 4216—20 o1386 Characterized prior to |Characterized pri_or to Directional Coupler test. No cal required. test. No cal required. Validated. No cal |Validated. No cal Waveguide Mega Industries 069Y7—158—13—712 required. required. Waveguide Transition Mega Industries O6gY7—158—13—701 |Validated. required. No cal Validated. required. No cal Validated. No cal |Validated. No cal Waveguide Termination Mega Industries O69Y7—158—13—701 required. required. Temperature / Humidity Control Company 150798832 10/2015 10/2017 Sensor Page: 10/10 This document shall not be reproduced, except in full or in part, without the written approval ofMVG The information contained herein is to be used onlyfor the purposefor which it is submitted and is not to be released in whole orpart without written approval ofMVG.

NTEKIE:I6 [accreoiteo) Certificate #4258.01 ~ COMOSAR E—Field Probe Calibration Report Ref : ACR.260.1.18.SATU.A SHENZHEN NTEK TESTING TECHNOLOGY CO., LTD. BUILDING E, FENDA SCIENCE PARK, SANWEI COMMUNITY, XIXIANG STREET, BAO‘AN DISTRICT, SHENZHEN GUANGDONG, CHINA MVG COMOSAR DOSIMETRIC E—FIELD PROBE SERIAL NO.: SN 08/16 EPGO287 Calibrated at MVG US 2105 Barrett Park Dr. — Kennesaw, GA 30144 $ &\_/* /—'\ \'ACCREDITEDI /ldul cuttresioncent eszssar Calibration Date: 09/17/2018 Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E—Field Probe calibration performed in MVG USA using the CALISAR / CALIBAIR test bench, for use with a COMOSAR system only. All calibration results are traceable to national metrology institutions.

NTEKIE:W Accreviteo Certificate #4258.01 ~ mvG COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref: ACR.260.1.18.SATUA Name Function Date Signature . . . roa Lz 2 Prepared by : Jérome LUC Product Manager 9/17/2018 9s Checked by : Jérome LUC Product Manager 9/17/2018 ”)/;7’ Approved by : Kim RUTKOWSKI Quality Manager 9/17/2018 hum Authowhd Customer Name SHENZHEN NTEK oi . Distribution : TESTNG TECHNOLOGY CO., LTD. Issue Date Modifications A 9/17/2018 Initial release Page: 2/10 This document shall not be reprodiuced, except in full orin part, without the written approval ofMVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whote or part without written approval ofMYG.

NTEKJEiJJ*= ** «aAccreoiteo) Certificate #4298.01 ~ ‘ COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref: ACR.260.1.18.SATUA TABLE OF CONTENTS 1 D@ViG@ UBG@F T@St ........00000000eeeeeememennenimencnmenenenenennenemnnnenee en eenenen enc neneme ces 4 2 PIOGUCt DESCTIDMHOM ...... .. ... 200ceccceeeeeeeeenenncmmenenenenennenmvvneeee en rennn en neneveves 4 2.1 General Information 4 CSEesnnblEt e 4 3.1 Linearity 4 3.2 Sensitivity 3.3 Lower Detection Limit 5 3.4 Isotropy 5 3.5 Boundary Effect 5 4 MEASUIEM@NE URMCETIAIMEY............s iess ccecennmmnemememnnmnnnnnnnnmenemene mm en 5 5 CalIiDrAtON MEASUI@MENE R@SUIES ........ cssc mm 6 5.1 Sensitivity in air 6 5.2 Linearity 7 5.3 Sensitivity in liquid 7 5.4 Isotropy 8 6 LiSt Of EQUIDIMENE ... ... .l lcc sc scscsccicecccccnnnnnnnnnmnmmemenneememnnmmmeene ns 10 Page: 3/10 This document shall not be reproduced, except in full orin part, without the written approval ofMVG. The information contained herein is to be used onlyfor the purposeforwhich it is submitted and is not to be released in whole or part without written approval ofMVG.

C NTEKJIEiW)*= #&a Certificate #4298.01 ~ mvG COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref ACR.260.1.18.SATUA 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number SN 08/16 EPGO287 Product Condition (new / used) Used Frequency Range of Probe 0.15 GHz—6GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.209 MQ Dipole 2: R2=0.196 MQ Dipole 3: R3=0.197 MQ A yearly calibration interval is recommended. 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG‘s COMOSAR E field Probes are built in accordance to the IEEE 1528. OET 65 Bulletin C and CELIEC 62209 standards. Figure 1 — MVG COMOSAR Dosimetric Efield Dipole Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEEE 1528, OET 65 Bulletin C, CENELEC EN50361 and CEIIEC 62209 standards provide recommended practices for the probe calibrations. including the performance characteristics of interest and methods by which to assess their affect. All calibrations / measurements performed meet the fore mentioned standards. 3.1 LINEARITY The evaluation of the linearity was done in free space using the waveguide. performing a power sweep to cover the SAR range 0.01 W/kg to 100W/keg. Page: 4/10 This document shall not be reprodiuced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used only for the purposefor which it is submitted and is not to be released in whote or part without written approval ofMYG.

wl t /n Certificate #4298.01 mvG COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref ACR.260.1.18.SATUA 3.2 SENSIMMIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards. 3.3 LOWER DETECTION LIMIT The lower detection limit was assessed using the same measurement set up as used for the linearity measurement. The required lower detection limit is 10 mW/kg. 34 ISOTROPY The axial isotropy was evaluated by exposing the probe to a reference wave from a standard dipole with the dipole mounted under the flat phantom in the test configuration suggested for system validations and checks. The probe was rotated along its main axis from 0 — 360 degrees in 15 degree steps. The hemispherical isotropy is determined by inserting the probe in a thin plastic box filled with tissue—equivalent liquid. with the plastic box illuminated with the fields from a half wave dipole. The dipole is rotated about its axis (0°—180°) in 15° increments. At each step the probe is rotated about its axis (0%—360°). 3.5 BOUNDARY EFFECT The boundary effect is defined as the deviation between the SAR measured data and the expected exponential decay in the liquid when the probe is oriented normal to the interface. To evaluate this effect, the liquid filled flat phantom is exposed to fields from either a reference dipole or waveguide. With the probe normal to the phantom surface. the peak spatial average SAR is measured and compared to the analytical value at the surface. 4 MEASUREMENT UNCERTAINTY The guidelines outlined in the IEEE 1528. OET 65 Bulletin C. CENELEC ENS0361 and CEMIEC 62209 standards were followed to generate the measurement uncertainty associated with an E—field probe calibration using the waveguide technique. All uncertainties listed below represent an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2, traceable to the Internationally Accepted Guides to Measurement Uncertainty. Uncertainty analysis of the probe calibration in waveguide ERROR sources U"":Ieu':’(':;" I;:’:;:::x Divisor ci j::’“':i’:;’o Incident or forward power 3.00% Rectanqular ,\B 1 1.732% Reflected power 3.00% Rectangular —\fi 1 1.732% Liquid conductivity 5.00% Rectangular ~B 1 2.987% Liquid permittivity 4.00% Rectanqular -\5 1 2.309% Field homogeneity 3.00% Rectangular —\E 1 1.732% Field probe positioning 5.00% Rectangular »\E 1 2.987% Field probe linearity 3.00% Rectanqular «E 1 1.732% Combined standard uncertainty 5.831% 9552contclencelovelk2 2 120% Page: 5/10 This document shall not be reprodiuced, except in full or in part, without the written approval ofMVG. The information contained herein is to be used only for the purposefor which it is submitted and is not to be released in whote or part without written approval ofMYG.

NTEKIE:W Accreviteo Certificate #4258.01 ~ us COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref: ACR.260.1.18.SATUA 5 CALIBRATION MEASUREMENT RESULTS Calibration Parameters Liquid Temperature 21 °C Lab Temperature 21 °C Lab Humidity 45 % 5.1 SENSITIVITY IN AR Normx dipole Normy dipole Normz dipole 1 (uV/(V/im))| 2 (uV/(V/imY) 3 (uV/(V/m)) 0.66 0.75 0.58 DCP dipole 1 DCP dipole 2 DCP dipole 3 (mV) (mV) (mV) 93 93 98 Calibration curves ei=f(V) (i=1,2,3) allow to obtain H—field value using the formula: E=,/E]l+E,] +E Calibration curves Dipole 1 Dipole 2 Dipole 3 0.02 ade oos oos 010 0.12 Voltage [V) Page: 6/10 This document shall not be reprodiuced, except in full orin part, without the written approval ofMVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whote or part without written approval ofMYG.

NTEKIE:W «a Accreviteo Certificate #4258.01 ~ mVG COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref: ACR.260.1.18.SATUA 5.2 LINEARITY Linearity 1.00— 0.75 @ 050 5 us 2 000 § 125 5 050 475 1.007, so 400 is0 200 &0 300 370 E—Field (Vém) Linearity:I+/1.89% (+0.08dB 5.3 SENSITIVITY IN LQUID Liquid Frequency Permittivity Epsilon (S/m) ConvE MHz +/— 100MHz) HL750 750 40.03 0.93 1.45 BL750 750. 56.83 1.00 1.49 HL850 835 42.19 0.90 1.50 BL§50 835 54.67 1.01 1.56 HL900 900 42.08 1.01 L.S1 HL1800 1800 41.68 1.46 1.71 BL1800 1800 53.86 1.46 1.77 HL1900 1900 38.45 1.45 2.03 BL1900 1900 53.32 1.56 2.07 HL2000 2000 38.26 1.38 1.76 HL2450 2450 37.50 1.80 2.00 BL2450 2450 53.22 1.89 2.08 HL2600 2600 39.80 1.99 2.12 BL2600 2600 52.52 2.23 2.19 HL5200 5200 35.64 4.67 2.55 BL5200 5200 48.64 5.51 2.62 HL5400 5400 36.44 4.87 2.53 BL5400 5400 46.52 5.77 2.59 HL5600 5600 36.66 5.17 2.64 BL5600 5600 46.79 5.77 2.73 HL5800 5800 35.31 5.31 2.72 BL5800 5800 47.04 6.10 2.81 LOWER DETECTION LIMIT: 7mW/kg Page: 7/10 This document shall not be reprodiuced, except in full orin part, without the written approval ofMVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whote or part without written approval ofMYG.

NTEKJILiW)*=« s zm Accreoiteo Certificate #4298.01 ~ ‘ COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref ACR.260.1.18.SATUA 5.4 ISOTROPY HL900 MHz — Axial isotropy: 0.04 dB — Hemispherical isotropy: 0.07 dB Isotropy curves 107 ot Dpol o 0e Mc is 02 30 o 01 06 os io as as es oz ap o2 oa s os 15 HL1800 MHz — Axial isotropy: 0.06 dB — Hemispherical isotropy: 0.08 dB Isolropy curves 107 ot Dpole mo 0e Mocis o so o2 o« oc os 104 . —1o as s o« cz c0 o2 oo as se 18 Page: 8/10 This document shall not be reproduced, except in full orin part, without the written approval ofMVG. The information contained herein is to be used ontyfor the purposefor which it is submitted and is not to be released in whole or part without written approval ofMPG.

NTEKIE:W Accreoiteo) Certificate #4298.01 ~ ‘ mvG COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref: ACR.260.1.18.SATUA HLS5600 MHz — Axial isotropy: 0.06 dB — Hemispherical isotropy: 0.08 dB Isotropy cuves 105 o8 Dpol m‘ a ge oress Dpole 80‘ o oo o2 o« 0s os 10 <lo —cs as o« o2 co o2 os as os 10 Page: 9/10 This document shall not be reprodiuced, except in full orin part, without the written approval ofMVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whote or part without written approval ofMYG.

NTEKJILiW)*=« Accreviteo Certificate #4298.01 mva COMOSAR E—FIELD PROBE CALIBRATION REPORT Ref: ACR.260.1.18.SATUA 6 LIST OF EQUIPMENT Equipment Summary Sheet Equipment Manufacturer / Identification No Current Next Calibration Description Model ‘| Calibration Date Date alidated. No cal Validated. No cal Flat Phantom MVG SN—20/09—SAM71 required. required . . alidated. No cal Validated. No cal |COMOSAR Test Bench Version 3 NA required. required . Network Analyzer RN°C® g‘VSAChwarz sN100132 02/2016 0272019 Reference Probe MVG EP 94 SN 37/08 10/2017 10/2018 Multimeter Keithley 2000 1188656 01/2017 01/2020 Signal Generator Agilent E4438C MY49070581 01/2017 01/2020 ie Characterized prior to|Characterized prior to Amplifier Aethercomm Sn 046 test. No cal required. |test. No cal required. Power Meter HP E4418A US38261498 01/2017 01/2020 Power Sensor HP ECP—E26A US37181460 01/2017 01/2020 Directional Coupler Narda 4216—20 o1386 Characterized prior to |Characterized prior to test. No cal required. test. No cal required. alidated. No cal Validated. No cal Waveguide Mega Industries O69Y7—158—13—712 required. required. Waveguide Transition Mega Industries osgy7—158—13.701 required. Validated. No cal Validated. required. No cal \Waveguide Termination| Mega Industries osav7—158—13—701 required. |Validated. No cal Validated. required. No cal Temperature / Humidity Control Company 150798832 1172017 11/2020 Sensor Page: 10/10 This document shall not be reprodiuced, except in full orin part, without the written approval ofMVG. The information contained herein is to be used only for the purposefor which it is submitted and is not to be released in whote orpart without written approval ofMYG.

NTEKIE:I6 [accreoiteo) Certificate #4258.01 ~ COMOSAR E—Field Probe Calibration Report Ref : ACR.139.3.18.SATU.A Shenzhen NTEK Testing Technology Co., Ltd. BUILDING E, FENDA SCIENCE PARK, SANWEI COMMUNITY, XIXIANG STREET, BAO‘AN DISTRICT, SHENZHEN, GUANGDONG, CHINA MVG COMOSAR DOSIMETRIC E—FIELD PROBE SERIAL NO.: SN 07/15 EP247 Calibrated at MVG US 2105 Barrett Park Dr. — Kennesaw, GA 30144 im R ++ s\ ies &t Z7 —n> f,,//,:.;\\‘:\\? * [accrepitep) /l:h iluls® caftrtioncert szzesor Calibration Date: 04/06/2018 Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E—Field Probe calibration performed in MVG USA using the CALISAR / CALIBAIR test bench, for use with a COMOSAR system only. All calibration results are traceable to national metrology institutions.


Document Created: 2018-11-22 17:58:48
Document Modified: 2018-11-22 17:58:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC