RF exposure portable

FCC ID: 2AQ8P-ILR1

RF Exposure Info

Download: PDF
FCCID_4220248

RF-EXPOSURE ASSESSMENT REPORT FCC 47 CFR Part 2.1093 Industry Canada RSS-102 RF-Exposure evaluation of portable equipment Report Reference No. .................... : G0M-1806-7488-TFC093PE-V01 Testing Laboratory ........................ : Eurofins Product Service GmbH Address ............................................ : Storkower Str. 38c 15526 Reichenwalde Germany Accreditation .................................... : FCC Test Firm Designation Number: DE0008 IC Testing Laboratory site: 3470A-2 Applicant’s name ........................... : Atlas Copco Industrial Technique AB Address ............................................ : Sickla Industriväg 19 10523 Stockholm Sweden Test specification: Standard........................................... : 47 CFR 2.1093 KDB 447498 D01 v06:2015-10-23 RSS-102, Issue 5:2015-03 Equipment under test (EUT): Product description Industrial Location Tethering - Positioning System Model No. IL-R Additional Model(s) None Brand Name(s) None Hardware version 1 Firmware / Software version 1.0.1 FCC-ID: 2AQ8P-ILR1 IC: 24224-ILR1 Test result Passed Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 1 of 14

«<= eurofins | | Product Service Possible test case verdicts: — N@ither @SS@SSEU NOF t@§t@d .............cscseeeememenenee. :0=— N/N — required by standard but not appl. to test object....... : N/A — required by standard but nOt teSt@d ... a NT — not required by standard for the test object............... ; NR — test object does meet the requirement ...................... : P (Pass) — test object does not meet the requirement................ :__F (Fail) Testing: Dat@ Of BC@IDt Of t@St I@M........... .lsn : 2018—05—15 Dat@ (§) Of ASS@SSM@Nt............c.cceeeem mm : 2019—03—20 Compiled by ...... Toralf Jahn Assessed by (+ signature)................: Toralf Jahn (Responsible for Assessment) Approved by (+ signature)................: Christian Weber (Head of Lab) Dat@ Of ISSU® ... 5 2019—03—20 Total number of pages ...............u: 14 General remarks: The test results presented in this report relate only to the object tested. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. Additional comments: Test Report No.: GOM—1806—7488—TFCO93PE—VO01 Eurofins Product Service GmbH Storkower Str. 38c, D—15526 Reichenwalde, Germany Page 2 of 14

Version History Version Issue Date Remarks Revised by 01 2019-03-20 Initial Release Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 3 of 14

REPORT INDEX 1 EQUIPMENT (TEST ITEM) DESCRIPTION 5 1.1 Reference Documents 6 1.2 Radiation Sources 7 1.3 Multi-transmitter Modes 7 2 RESULT SUMMARY 8 3 RF-EXPOSURE CLASSIFICATIONS 9 4 ASSESSMENT 10 4.1 SAR Exemption Assessment –FCC KDB447498 / RSS-102 10 Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 4 of 14

1 Equipment (Test item) Description Description Industrial Location Tethering - Positioning System Model IL-R Additional Model(s) None Brand Name(s) None Serial number None Hardware version 1 Software / Firmware version 1.0.1 PMN Industrial Location Radio Module (IL-R) HVIN 1 FVIN 1 HMN N/A FCC-ID 2AQ8P-ILR1 IC 24224-ILR1 Equipment type Radio module Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 5 of 14

1.1 Reference Documents Document type Document No. Issued by Date FCC 15F Test Report G0M-1806-7488-TFC15FUW-V02 Eurofins Product Service GmbH 2019-03-04 FCC 15.247 Test Report G0M-1806-7488-TFC247BL-V01 Eurofins Product Service GmbH 2018-11-20 Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 6 of 14

1.2 Radiation Sources Mode # Description Frequency range [MHz] 3000 - 6800 Transmission modes BPM-BPSK Maximum conducted power [dBm] N/A Maximum radiated power [dBm] -10.8 UWB Maximum transmission duty cycle [%] 100 Antenna gain [dBi] N/A Antenna diameter [cm] 2 Assessment Frequency [MHz] 6520 Frequency range [MHz] 2400 – 2483.4 Transmission modes GFSK Maximum conducted power [dBm] -2.0 Maximum radiated power [dBm] -1.5 Bluetooth LE Maximum transmission duty cycle [%] 64 Antenna gain [dBi] 0.5 Antenna diameter [cm] 2 Assessment Frequency [MHz] 2480 1.3 Multi-transmitter Modes UWB BT LE UWB N/A Yes BT LE Yes N/A Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 7 of 14

2 Result Summary FCC 47 CFR Part 2.1093, KDB447498, IC RSS-102 Product Specific Requirement Result Remarks Standard Section 47 CFR 2.1093 SAR evaluation exemption : Bluetooth LE + UWB PASS KDB447498 RSS-102 2.5.1 SAR evaluation exemption : Bluetooth LE + UWB PASS Remarks: Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 8 of 14

3 RF-Exposure Classifications Device Types A fixed device is defined as a device physically secured at one fixed location and Fixed cannot be easily re-located. A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation Mobile distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. (47 CFR 2.1091) A portable device is defined as a transmitting device designed to be used so that Portable the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. (47 CFR 2.1093) Exposure Categories Limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for Occupational / exposure and can exercise control over their exposure. Limits for Controlled occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. Exposures apply in situations in which the general public may be exposed, or in General population / which persons that are exposed as a consequence of their employment may not uncontrolled be fully aware of the potential for exposure or cannot exercise control over their exposure. Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 9 of 14

4 Assessment 4.1 SAR Exemption Assessment –FCC KDB447498 / RSS-102 Low Power Exclusion acc. to FCC KDB447498 / IC RSS-102 Verdict: PASS Assessment according Reference Method to reference KDB447498 & 2.1093 / RSS-102 & Safety Code 6 Device type portable Exposure category General population FCC/IC SAR Limits Occupational SAR values General public SAR values Region [W/kg] [W/kg] Whole-body SAR averaging mass = entire body 0.4 0.08 Partial-body SAR averaging mass = 1g 8.0 1.6 Hands, Wrists, Feet and Ankles SAR averaging mass = 10g 20 4 FCC SAR test exclusion Excerpt from KDB 447498: Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: π‘šπ‘Žπ‘₯. π‘π‘œπ‘€π‘’π‘Ÿ π‘œπ‘“ π‘β„Žπ‘Žπ‘›π‘›π‘’π‘™ [π‘šπ‘Š] 3.0 1𝑔 𝑆𝐴𝑅 βˆ™ √𝑓[𝐺𝐻𝑧] ≤ { π‘šπ‘–π‘›. 𝑑𝑒𝑠𝑑 π‘ π‘’π‘π‘Žπ‘Ÿπ‘Žπ‘‘π‘–π‘œπ‘› π‘‘π‘–π‘ π‘‘π‘Žπ‘›π‘π‘’ [π‘šπ‘š] 7.5 10𝑔 𝑆𝐴𝑅  f [GHz] is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparision The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 10 of 14

IC SAR evaluation exemptions Excerpt from RSS-102 Issue 5: SAR evaluation is required if the separation distance between the user and the radiating element of the device is less than or equal to 20 cm, except when the device operates at a power level below the following threshold limits: For limb-worn devices where the 10 gram value applies, the exemption limits for routine evaluation are multiplied by a factor of 2.5. Assessment procedure Standalone operation assessment: For the radiation source included into the device the output power is taken from a corresponding RF test report. If needed the output power is converted to source based, time-averaged output power. Finally the output power is compared to the FCC and IC low power SAR evaluation exemption level. Concurrent operation assessment: The ratios of the power values and the corresponding limits are calculated and summed and the sum is compared to the maximum of 1. Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 11 of 14

Assessment results Bluetooth Transmission mode Operating mode frequency range [MHz] 2402 – 2480 Assessment frequency [MHz] 2480 Transmission duty cycle [%] 64% Peak conducted power [dBm] -2.0 Minimum separation distance [mm] 5.0 Source-based, time averaged conducted power Duty cycle correction [dB] -1.9 Averaged conducted power [dBm] -3.9 Averaged conducted power [mW] 0.4 Source-based, time averaged radiated power Antenna gain [dBi] 0.5 Averaged radiated power [dBm e.i.r.p.] -3.4 Averaged radiated power [mW e.i.r.p.] 0.45 SAR evaluation exemption power levels 0.45[π‘šπ‘Š] FCC SAR test exclusion condition ⋅ √2.480 = 0.1 ≤ 3.0 → PASS 5.0[π‘šπ‘š] IC SAR test exclusion condition 0.45 π‘šπ‘Š ≤ 4.0 π‘šπ‘Š → PASS Verdict The source-based, time-averaged output power of the EUT fulfills the SAR test exclusion requirements according to FCC KDB447498 and IC RSS-102 Comments: Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 12 of 14

Assessment results UWB Transmission mode Operating mode frequency range [MHz] 3000 - 6800 Assessment frequency [MHz] 5800 Transmission duty cycle [%] 100% Peak conducted power [dBm] N/A Minimum separation distance [mm] 5.0 Source-based, time averaged conducted power Duty cycle correction [dB] 0 Averaged conducted power [dBm] N/A Averaged conducted power [mW] N/A Source-based, time averaged radiated power Antenna gain [dBi] N/A Averaged radiated power [dBm e.i.r.p.] -10.8 Averaged radiated power [mW e.i.r.p.] 0.083 SAR evaluation exemption power levels 0.083[π‘šπ‘Š] FCC SAR test exclusion condition ⋅ √5.80 = 0.04 ≤ 3.0 → PASS 5.0[π‘šπ‘š] IC SAR test exclusion condition 0.083 π‘šπ‘Š ≤ 1.0 π‘šπ‘Š → PASS Verdict The source-based, time-averaged output power of the EUT fulfills the SAR test exclusion requirements according to FCC KDB447498 and IC RSS-102 Comments: Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 13 of 14

Assessment result - UWB + Bluetooth LE Concurrent Operating Modes Number of concurrent operating modes 2 Compliance Distance Distance to EUT used for compliance evaluation [mm] 5.0 UWB FCC SAR exlusion limit 3.0 FCC SAR exlusion value 0.04 FCC SAR exlusion ratio (value / limit) 0.013 ISED SAR exlusion limit 1.0 mW ISED SAR exlusion value 0.083 mW ISED SAR exlusion ratio (value / limit) 0.083 Bluetooth LE FCC SAR exlusion limit 3.0 FCC SAR exlusion value 0.1 FCC SAR exlusion ratio (value / limit) 0.033 ISED SAR exlusion limit 4.0 mW ISED SAR exlusion value 0.45 mW ISED SAR exlusion ratio (value / limit) 0.113 Sum of SAR exlusion ratios ∑ FCC 0.064 ∑ ISED 0.196 Verdict The EUT fulfills the FCC multi-transmitter SAR exlusion limit @ 5.0 mm The EUT fulfills the IC multi-transmitter SAR exlusion limit @ 5.0 mm Comments: Test Report No.: G0M-1806-7488-TFC093PE-V01 Eurofins Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 14 of 14


Document Created: 2019-03-27 12:00:20
Document Modified: 2019-03-27 12:00:20
Β© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC