Test Report

FCC ID: 2AQ3AH823H

Test Report

Download: PDF
FCCID_4484584

FCC PART 15.249 TEST REPORT For Shenzhen VanTop Technology & Innovation Co., Ltd. 502, 5th Flr. BLDG 4, MinQi Technology Park, No. 65 Lishan Road, Taoyuan Street, Nanshan District, Shenzhen, China FCC ID: 2AQ3AH823H Report Type: Product Type: Original Report Quadcopter Controller Report Number: RSZ190902811-00A Report Date: 2019-09-17 Nancy Wang Reviewed By: RF Engineer Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Prepared By: Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”. The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 MEASUREMENT UNCERTAINTY ....................................................................................................................................4 TEST FACILITY .............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................5 JUSTIFICATION .............................................................................................................................................................5 EUT EXERCISE SOFTWARE ..........................................................................................................................................5 EQUIPMENT MODIFICATIONS .......................................................................................................................................5 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................5 SUPPORT CABLE DESCRIPTIONS ...................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................6 SUMMARY OF TEST RESULTS ...............................................................................................................................7 TEST EQUIPMENT LIST ...........................................................................................................................................8 FCC§15.203 - ANTENNA REQUIREMENT..............................................................................................................9 APPLICABLE STANDARD ..............................................................................................................................................9 ANTENNA CONNECTOR CONSTRUCTION ......................................................................................................................9 FCC§15.205, §15.209 & §15.249(D) - RADIATED EMISSIONS ............................................................................10 APPLICABLE STANDARD ............................................................................................................................................10 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP ..............................................................................................10 EUT SETUP ................................................................................................................................................................11 TEST PROCEDURE ......................................................................................................................................................12 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................12 TEST RESULTS SUMMARY ..........................................................................................................................................12 TEST DATA ................................................................................................................................................................12 FCC§15.215(C) - 20DB EMISSION BANDWIDTH ................................................................................................20 APPLICABLE STANDARD ............................................................................................................................................20 TEST PROCEDURE ......................................................................................................................................................20 TEST DATA ................................................................................................................................................................20 FCC Part 15.249 Page 2 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A GENERAL INFORMATION Product Description for Equipment under Test (EUT) Product Quadcopter Controller Tested Model H823H H823H PLUS, H823P, H823, SP600T, SP500G, SP510G, SP520G, Multiple Models# SP550G, SP550, SP330, SP350 Frequency Range 2416MHz~2475MHz Modulation Technique GFSK Antenna Specification 0.17 dBi Voltage Range DC 1.5V*3 AAA battery Date of Test 2019/09/06~2019/09/13 Sample serial number 190902811 (Assigned by BACL, Shenzhen) Received date 2019/09/02 Sample/EUT Status Good condition Notes: This series products model: H823H PLUS, H823P, H823, SP600T, SP500G, SP510G, SP520G, SP550G, SP550, SP330, SP350 and H823H are electrically identical, model H823H with red color was selected for fully testing, the detailed information can be referred to the declaration which was stated and guaranteed by the applicant. Objective This type approval report is prepared on behalf of Shenzhen VanTop Technology & Innovation Co., Ltd. in accordance with Part 2-Subpart J, and Part 15-Subparts A and C of the Federal Communication Commissions rules. The tests were performed in order to determine compliance with FCC Part 15, Subpart C, and section 15.203, 15.205, 15.209 and 15.249 rules. Related Submittal(s)/Grant(s) No Related Submittal(s)/Grant(s). Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. All radiated and conducted emissions measurement was performed at Bay Area Compliance Laboratories Corp. (Shenzhen). The radiated testing was performed at an antenna-to-EUT distance of 3 meters. FCC Part 15.249 Page 3 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A Measurement Uncertainty Parameter Uncertainty Occupied Channel Bandwidth ±5% RF Output Power with Power meter ±0.73dB RF conducted test with spectrum ±1.6dB AC Power Lines Conducted Emissions ±1.95dB Emissions, Below 1GHz ±4.75dB Radiated Above 1GHz ±4.88dB Temperature ±1℃ Humidity ±6% Supply voltages ±0.4% Note: Otherwise required by the applicant or Product Regulations, Decision Rule in this report did not consider the uncertainty. Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Shenzhen) to collect test data is located on the 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China. The test site has been approved by the FCC under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No.: 342867, the FCC Designation No.: CN1221. The test site has been registered with ISED Canada under ISED Canada Registration Number 3062B. FCC Part 15.249 Page 4 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A SYSTEM TEST CONFIGURATION Justification The system was configured for testing by manufacturer. 15 channels are provided to testing: Frequency Frequency Channel Channel (MHz) (MHz) 1 2416 9 2469 2 2450 10 2470 3 2457 11 2471 4 2458 12 2472 5 2459 13 2473 6 2463 14 2474 7 2465 15 2475 8 2468 / / Channel 1, Channel 2 and Channel 15 were selected for testing. EUT Exercise Software No software was used. Equipment Modifications No modifications were made to the unit tested. Support Equipment List and Details Manufacturer Description Model Serial Number N/A N/A N/A N/A Support Cable Descriptions Cable Description Length (m) From/Port To N/A N/A N/A N/A FCC Part 15.249 Page 5 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A Block Diagram of Test Setup For radiated emissions: 1.0 Meter EUT Non-Conductive Table 80 cm above Ground Plane for below 1GHz test 150 cm above Ground Plane for above 1GHz test 1.5 Meters FCC Part 15.249 Page 6 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §15.203 Antenna Requirement Compliance §15.207(a) Conduction Emissions Not Applicable Radiated Emissions& Outside 15.205, §15.209, §15.249(d) Compliance of Band Emission §15.215 (c) 20 dB Bandwidth Compliance Note: Not Applicable: The device is powered by battery only. FCC Part 15.249 Page 7 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A TEST EQUIPMENT LIST Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Radiated Emission Test A.H. System Horn Antenna SAS-200/571 135 2018-09-01 2021-08-31 Rohde & Schwarz Spectrum Analyzer FSV40-N 102259 2019-07-22 2020-07-21 Sunol Sciences Broadband Antenna JB1 A040904-1 2017-12-22 2020-12-21 COM-POWER Pre-amplifier PA-122 181919 2018-11-12 2019-11-12 Sonoma Instrument Amplifier 310N 186238 2018-11-12 2019-11-12 Rohde & Schwarz EMI Test Receiver ESR3 102455 2019-07-09 2020-07-08 Ducommun UFA147A- MFR64639 RF Cable 2018-11-12 2019-11-12 technologies 2362-100100 231029-003 Ducommun RF Cable 104PEA 218124002 2018-11-12 2019-11-12 technologies Ducommun RF Cable RG-214 1 2018-11-12 2019-11-12 technologies Ducommun RF Cable RG-214 2 2018-11-12 2019-11-12 technologies Ducommun ARH-4223- Horn Antenna 1007726-04 2017-12-29 2020-12-28 Technologies 02 QLW- Heatsink Required Amplifier 15964001002 2018-11-12 2019-11-12 18405536-J0 BSF2402- Sinoscite Notch Filter 2480MN- 99632 2018-11-12 2019-11-12 0898-001 Rohde & Schwarz Auto test software EMC 32 V9.10 NCR NCR * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to requirements that traceable to National Primary Standards and International System of Units (SI). FCC Part 15.249 Page 8 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A FCC§15.203 - ANTENNA REQUIREMENT Applicable Standard According to FCC § 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. Antenna Connector Construction The EUT has one monopole antenna which was permanently attached and the antenna gain is 0.17 dBi, fulfill the requirement of this section. Please refer to the EUT photos. Result: Compliance. FCC Part 15.249 Page 9 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A FCC§15.205, §15.209 & §15.249(d) - RADIATED EMISSIONS Applicable Standard As per FCC§15.249 (a), except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental Field strength of fundamental Field strength of harmonics frequency (millivolts/meter) (microvolts/meter) 902–928 MHz 50 500 2400–2483.5 MHz 50 500 5725–5875 MHz 50 500 24.0–24.25 GHz 250 2500 As per FCC§15.249 (c), Field strength limits are specified at a distance of 3 meters. As per FCC§15.249 (d), Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. EMI Test Receiver & Spectrum Analyzer Setup The system was investigated from 30 MHz to 25 GHz. During the radiated emission test, the EMI test receiver & Spectrum Analyzer Setup were set with the following configurations: Frequency Range RBW Video B/W IF B/W Measurement 30 MHz – 1000 MHz 100 kHz 300 kHz 120 kHz QP 1MHz 3 MHz / PK Note 1 Above 1 GHz 1MHz 10 Hz / Average 1MHz ＞1/T Note 2 / Average Note 1: when duty cycle is no less than 98% Note 2: when duty cycle is less than 98% FCC Part 15.249 Page 10 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A EUT Setup Below 1GHz: Above 1GHz: The radiated emission and out of band emission tests were performed in the 3 meters chamber test site, using the setup accordance with the ANSI C63.10-2013. The specification used was the FCC 15.209/15.205 and FCC 15.249 limits. FCC Part 15.249 Page 11 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. The EUT is set 3 meter away from the testing antenna, which is varied from 1-4 mete, and the EUT is placed on a turntable, which is 0.8 meter above ground plane for below 1GHz or 1.5 meter for above 1GHz, the table shall be rotated for 360 degrees to find out the highest emission. The receiving antenna should be changed the polarization both of horizontal and vertical. Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Results Summary According to the data as following, the EUT complied with the FCC Part 15.205, 15.209 & §15.249 Test Data Environmental Conditions Temperature: 25~26 ℃ Relative Humidity: 51~52 % ATM Pressure: 101.0 kPa The testing was performed by Zero Yan on 2019-09-13 and by Curry Xiang on 2019-09-06. Test Mode: Transmitting FCC Part 15.249 Page 12 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A High Channel (Worst Mode): 30MHz – 1 GHz: 80 70 60 Electric Field Strength QP-3m 50 Level in dB¦ÌV/ dB¦ÌV/ 40 30 20 10 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Corrected Antenna Turntable Correction Frequency Antenna Limit Margin Amplitude height position Factor (MHz) Polarity (dBμV/m) (dB) (dBμV/m) (cm) (degree) (dB/m) 30.606250 19.50 300.0 V 58.0 -8.0 40.00 20.50 35.941250 16.17 202.0 H 138.0 -11.1 40.00 23.83 586.173750 26.56 300.0 H 40.0 -2.6 46.00 19.44 683.052500 27.45 300.0 H 0.0 -2.0 46.00 18.55 837.040000 35.08 102.0 H 64.0 5.6 46.00 10.92 939.011250 36.95 202.0 H 60.0 8.7 46.00 9.05 FCC Part 15.249 Page 13 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A 1 GHz - 25 GHz: FCC Part Receiver Rx Antenna Corrected Corrected Frequency Turntable 15.249&15.209 Factor Amplitude (MHz) Reading Degree Height Polar Limit Margin PK/QP/Ave. (dB/m) (dBμV/m) (dBμV) (m) (H/V) (dBμV/m) (dB) Low Channel (2416 MHz) 2416.00 49.45 PK 254 1.1 H 31.87 81.32 114 32.68 2416.00 48.23 Ave. 254 1.1 H 31.87 80.10 94 13.90 2416.00 47.84 PK 296 1.8 V 31.87 79.71 114 34.29 2416.00 46.57 Ave. 296 1.8 V 31.87 78.44 94 15.56 2374.66 28.27 PK 316 2.2 H 31.87 60.14 74 13.86 2374.66 14.25 Ave. 316 2.2 H 31.87 46.12 54 7.88 2484.94 28.15 PK 56 2.3 H 32.13 60.28 74 13.72 2484.94 14.20 Ave. 56 2.3 H 32.13 46.33 54 7.67 4832.00 44.26 PK 41 2.3 H 6.28 50.54 74 23.46 4832.00 29.71 Ave. 41 2.3 H 6.28 35.99 54 18.01 Middle Channel (2450 MHz) 2450.00 49.24 PK 102 2.1 H 32.03 81.27 114 32.73 2450.00 47.89 Ave. 102 2.1 H 32.03 79.92 94 14.08 2450.00 48.63 PK 171 1.6 V 32.03 80.66 114 33.34 2450.00 47.25 Ave. 171 1.6 V 32.03 79.28 94 14.72 4900.00 43.77 PK 201 2.4 H 6.76 50.53 74 23.47 4900.00 28.46 Ave. 201 2.4 H 6.76 35.22 54 18.78 High Channel (2475 MHz) 2475.00 48.12 PK 353 1.8 H 32.13 80.25 114 16.76 2475.00 47.06 Ave. 353 1.8 H 32.13 79.19 94 16.76 2475.00 46.53 PK 309 1.1 V 32.13 78.66 114 16.76 2475.00 45.11 Ave. 309 1.1 V 32.13 77.24 94 16.76 2388.09 28.74 PK 21 2.4 H 31.87 60.61 74 13.39 2388.09 14.69 Ave. 21 2.4 H 31.87 46.56 54 7.44 2494.44 28.45 PK 283 2.2 H 32.13 60.58 74 13.42 2494.44 14.61 Ave. 283 2.2 H 32.13 46.74 54 7.26 4950.00 45.64 PK 267 1.2 H 6.80 52.44 74 21.56 4950.00 30.11 Ave. 267 1.2 H 6.80 36.91 54 17.09 Note: Corrected Amplitude = Corrected Factor + Reading Corrected Factor=Antenna factor (RX) +cable loss – amplifier factor Margin = Limit- Corr. Amplitude The emission more than20dB below the limit was not required to be recorded. FCC Part 15.249 Page 14 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A Pre-scan with High channel Peak Horizontal Date: 6.SEP.2019 20:41:25 Date: 6.SEP.2019 21:22:12 FCC Part 15.249 Page 15 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A Vertical Date: 6.SEP.2019 20:34:53 Date: 6.SEP.2019 21:30:30 FCC Part 15.249 Page 16 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A Average value for the peak point at pre-scan Horizontal Date: 6.SEP.2019 20:46:19 Date: 6.SEP.2019 20:42:38 FCC Part 15.249 Page 17 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A Vertical Date: 6.SEP.2019 20:38:25 Date: 6.SEP.2019 21:33:54 FCC Part 15.249 Page 18 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A Duty Cycle Date: 6.SEP.2019 20:09:53 Mode Duty Cycle (%) T(us) 1/T(kHz) VBW Setting 10log(1/ Duty Cycle) GFSK 11 826 1.21 1kHz 9.59 FCC Part 15.249 Page 19 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A FCC§15.215(c) - 20dB EMISSION BANDWIDTH Applicable Standard Intentional radiators operating under the alternative provisions to the general emission limits, as contained in § 15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. Test Procedure 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Position the EUT without connection to measurement instrument. Turn on the EUT and connect it to measurement instrument. Then set it to any one convenient frequency within its operating range. Set a reference level on the measuring instrument equal to the highest peak value. 3. Measure the frequency difference of two frequencies that indicated 20dB bandwidth. 4. Repeat above procedures until all frequencies measured were complete. Test Data Environmental Conditions Temperature: 25 ℃ Relative Humidity: 51 % ATM Pressure: 101.0 kPa The testing was performed by Curry Xiang on 2019-09-10. Test Mode: Transmitting Please refer to the following table and plots. Frequency 20dB Bandwidth Channel (MHz) (MHz) Low 2416 1.385 Middle 2450 1.216 High 2475 1.133 FCC Part 15.249 Page 20 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A Low Channel Date: 10.SEP.2019 17:09:54 Middle Channel Date: 10.SEP.2019 17:13:05 FCC Part 15.249 Page 21 of 22

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190902811-00A High Channel Date: 10.SEP.2019 16:51:39 ***** END OF REPORT ***** FCC Part 15.249 Page 22 of 22


Document Created: 2019-10-17 17:18:56
Document Modified: 2019-10-17 17:18:56
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC