User Manual

FCC ID: 2APZU-LSTNBEACON

Users Manual

Download: PDF
FCCID_3914351

Product Specication Funtions Version: 4.2 Supports:A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/DI1.3 1.Power on: Press and hold the function key around 3 seconds(until you hear “power on” or until the indicator Chipset: CSR Multi function key light is flashing JUST red) Frequency: 2.4GHz Sensitivity: -80db＜0.1% BER 2.Power off: Press and Hold ONE of the earbuds Wireless range: about 10m LSTN BEACON function key for 3 seconds (until you hear “power off” or Work time: Around 3 hours until the indicator light flashes red and then turns off) User’s manual Standby time: up to 100 hours Battery capacity: 50mAh for earphone and 500mAh 3.To pause: short press the function key once. for charging base Earcap 4.Next song: short press the function key twice. Accessories 5.Answer a call: short press the function key once. User manual USB CHARGING CABLE 6.Hang up a call: short press the function key once. Earcap:3 pairs (S,M,L size) ON/OFF Earhook:4 pairs Charging jack 7.Reject call: short press the function key twice. (5 pins micro) Pairing Charge the charging base FCC Statement • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and This equipment has been tested and found to receiver. 1.Press and hold the function key of one earbud Please charge the charging case by USB cable. comply with the limits for a Class B digital • Connect the equipment into an outlet on a circuit different for 5 seconds ( until the indicator light is flashing The indicator light on charging case ALL stay device, pursuant to part 15 of the FCC Rules. from that to which the receiver is connected. blue and red ). blue color, charging is finished These limits are designed to provide reasonable • Consult the dealer or an experienced radio/TV technician protection against harmful interference in a for help. residential installation. This equipment gener- Caution: Any changes or modifications to this device not 2.Press and hold the function key of the other Charge the earphone ates, uses and can radiate radio frequency explicitly approved by manufacturer could void your authority earbud for 2 seconds (Until the indicator light is to operate this equipment. energy and, if not installed and used in accor- flashing JUST red). dance with the instructions, may cause harmful This device complies with part 15 of the FCC Rules. Put the earphone into charging base and then Operation is subject to the following two conditions: (1) This switch the “ON/OFF” to on, Charging will be interference to radio communications. However, device may not cause harmful interference, and (2) this 3.Go into your device and find “LSTN BEACON” started. The indicator light on earphone stay there is no guarantee that interference will not device must accept any interference received, including in your BT available devices. blue color, charging is finished occur in a particular installation. If this equip- interference that may cause undesired operation. ment does cause harmful interference to radio or television reception, which can be determined RF Exposure Information by turning the equipment off and on, the user is The device has been evaluated to meet general RF encouraged to try to correct the interference by exposure requirement. The device can be used in portable exposure condition without restriction. one or more of the following measures:


Document Created: 2018-06-19 10:40:33
Document Modified: 2018-06-19 10:40:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC