2APV2-CSA1S32W

FCC ID

Equipment: Internet Alarm Hub

Hangzhou Ezviz Software Co., Ltd. -CSA1S32W

Floor 16, Unit B, Building 1, No. 555, Qianmo Road Binjiang District, Hangzhou, N/A 310052 China

Application
Frequency Range
Final Action Date
Granted
KV2Ro6TTMIqCrQjqIov2eQ==
915.0-915.0
2019-06-06
APPROVED
sEsF7YqnWiU9QRZMBPIDSw==
2412.0-2462.0
2019-06-06
APPROVED
File NameDocument TypeDateDirect
User ManualUsers Manual 2019-06-06 00:00:00 pdf
Test ReportTest Report 2019-06-06 00:00:00 pdf
Test Setup PhotoTest Setup Photos 2019-06-06 00:00:00 pdf
LabelID Label/Location Info 2019-06-06 00:00:00 pdf
Internal PhotoInternal Photos 2019-06-06 00:00:00 pdf
External PhotoExternal Photos 2019-06-06 00:00:00 pdf
confidentiality LetterCover Letter(s) 2019-06-06 00:00:00 pdf
POACover Letter(s) 2019-06-06 00:00:00 pdf
Test Setup PhotosTest Setup Photos 2019-06-06 00:00:00 pdf
RF Exposure InfoRF Exposure Info 2019-06-06 00:00:00 pdf
SchematicsSchematics N/A
Block DiagramBlock Diagram N/A
Operational descriptionOperational Description N/A

Application Details:

EquipmentInternet Alarm Hub
FRN0027542356
Grantee Code2APV2
Product Code-CSA1S32W
Applicant BusinessHangzhou Ezviz Software Co., Ltd.
Business AddressFloor 16, Unit B, Building 1, No. 555, Qianmo Road Binjiang District, Hangzhou,N/A China 310052
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
TCB Email[email protected]
Applicantweiliang Bu –
Applicant Phone
Applicant Fax0571-88075988
Applicant Email[email protected]
Applicant MailStop
Test FirmSGS-CSTC Standards Technical Services Co.,Ltd.
Test Firm ContactLola Yuan
Test Firm Phone
Test Firm Fax
Test Firm Email[email protected]
Certified ByParlam Zhan – Manager
Comment [sEsF7YqnWiU9QRZMBPIDSw==]: Power Output listed is conducted. This transmitter must be professionally installed as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz bandwidth mode only.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC