ROKK wireless Active 2APUSCCW04E MPE Test Report

FCC ID: 2APUPSCCW04E

RF Exposure Info

Download: PDF
FCCID_4176052

Report No.:UNIA19010802FR-01 FCC MPE TEST REPORT FCC ID: 2APUPSCCW04E Product： ROKK wireless Active Trade Name： Scanstrut Model Name： SC-CW-04E Serial Model： SC-CW-04F, SC-CW-04G Report No.： UNIA19010802FR-01 Prepared for Scanstrut Ltd. 5 Darts Business Park, Clyst St. George, Exeter, United Kingdom Prepared by Shenzhen United Testing Technology Co., Ltd. 2F, Annex Bldg, Jiahuangyuan Tech Park, #365 Baotian 1 Rd, Tiegang Community, Xixiang Str, Bao'an District, Shenzhen, China Page1 / 8

Report No.:UNIA19010802FR-01 TEST RESULT CERTIFICATION Applicant’s name ............. : Scanstrut Ltd. Address ............................. : 5 Darts Business Park, Clyst St. George, Exeter, United Kingdom Manufacture's Name........ : Scanstrut Ltd. Address ............................. : 5 Darts Business Park, Clyst St. George, Exeter, United Kingdom Product description Product name .................... : ROKK wireless Active Trade Mark ............................ : Scanstrut Model and/or type reference : SC-CW-04E,SC-CW-04F, SC-CW-04G FCC KDB 680106 D01 RF Exposure Wireless Charging Standards ......................... : Apps v03 This device described above has been tested by Shenzhen United Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of UNI, this document may be altered or revised by Shenzhen United Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. Date of Test ........................................... : Date (s) of performance of tests............. : Jan. 08, 2019 ~ Jan. 21, 2019 Date of Issue.......................................... : Jan. 21, 2019 Test Result ............................................. : Pass Prepared by: Kahn yang/Editor Reviewer: Sherwin Qian/Supervisor Approved & Authorized Signer: Liuze/Manager Page2 / 8

Report No.:UNIA19010802FR-01 Note:For a more detailed features description, please refer to the manufacturer’sspecificationsor the User'sManual. ChannelList Channel Frequency(KHz) Channel Frequency(MHz) 01 125 TheEUTantennaisCoilAntenna.Noantennaotherthanthatfurnishedbytheresponsibleparty shall be used with thedevice. 1. SUMMARY OF TESTRESULTS 1.1 Test procedures according to the technicalstandards: FCC KDB 680106 D01 RF Exposure Wireless Charging Appsv03 FCC CFR 47 Standard Section Test Item Judgment Remark Electric Field Strength (E) (V/m) PASS FCC CFR 47 part1, 1.1310 KDB680106 D01v03(3)(3) Magnetic Field Strength (H) (A/m) PASS 1.2 MEASUREMENTUNCERTAINTY The reported uncertainty of measurement y ±U，where expended uncertainty U is based onastandard uncertainty multiplied by a coverage factor of k=2 ， providing a level of confidenceofapproximately 95%。 No. Item Uncertainty 1 Allemissions,radiated(<30M)(9KHz-30MHz) ±2.45dB 2 Temperature ±0.5°C 3 Humidity ±2% Page3 / 8

Report No.:UNIA19010802FR-01 1.3 TestInstruments Description Brand Model No. Frequency Range Calibrated Until Broadband Field Meter NARDA NBM-550 –– Sep. 01, 2019 Magnetic Field Meter NARDA ELT-400 1–400kHz Sep. 01, 2019 Magnetic Probe NARDA HF-3061 300kHz–30MHz Sep. 01, 2019 Magnetic Probe NARDA HF-0191 27–1000MHz Sep. 01, 2019 Broadband Field Meter NARDA NBM-550 –– Sep. 01, 2019 Electric Field Meter COMBINOVA EFM 200 5Hz–400kHz Sep. 01, 2019 E-Field Probe NARDA EF-0391 100kHz–3GHz Sep. 01, 2019 E-Field Probe NARDA EF-6091 100MHz–60GHz Sep. 01, 2019 NOTE:Thecalibrationintervaloftheabovetestinstrumentsis12months. Page4 / 8

Report No.:UNIA19010802FR-01 2. MAXIMUM PERMISSIBLEEXPOSURE 2.1 MAXIMUM PERMISSIBLEEXPOSURE Limit of Maximum PermissibleExposure Limits for Occupational / Controlled Exposure Averaging Time FrequencyRange(M ElectricFieldStrengt MagneticField Power Density(S) Hz) h (E)(V/m) Strength (H)(A/m) (mW/cm²) |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Limits for General Population / Uncontrolled Exposure Power AveragingTime FrequencyRange(M ElectricFieldStrengt MagneticFieldStreng Density(S)(mW/cm² |E|²,|H|² Hz) h (E)(V/m) th (H)(A/m) ) orS(minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180 / f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1 30 Note 1: f = frequency in MHz ; *Plane-wave equivalent power density. 2: For the applicable limit, see FCC 1.1310, 680106 D01 RF Exposure Wireless Charging Apps v03. 3: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. Page5 / 8

Report No.:UNIA19010802FR-01 3. TESTPROCEDURE a. For devices designed for typical desktop applications, such a wireless charging pads,RFexposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used todemonstratecompliance. Measurements should be made from all sides and the top of theprimary/clientpair, with the 15 cm measured from the center of the probe(s) to the edge of thedevice. 4.1 TESTSETUP 4.2 TESTPHOTO Page6 / 8

Report No.:UNIA19010802FR-01 4.3 RESULT OF MAXIMUM PERMISSIBLEEXPOSURE For Full load mode: E-Filed Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.24 1.02 1.13 1.14 1.17 307 614 H-Filed Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.25 0.19 0.25 0.15 0.17 0.815 1.63 For Half Load for wrist band mode: E-Filed Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.16 1.19 1.18 1.18 1.14 307 614 H-Filed Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.19 0.20 0.20 0.22 0.17 0.815 1.63 Page7 / 8

Report No.:UNIA19010802FR-01 For Half Load for shoepodmode: E-Filed Strength at 15 cm from the edges surrounding the EUT(V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.18 1.18 1.21 1.19 1.18 307 614 H-Filed Strength at 15 cm from the edges surrounding the EUT(A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.19 0.18 0.18 0.22 0.17 0.815 1.63 For No loadmode: E-Filed Strength at 15 cm from the edges surrounding the EUT(V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.21 1.14 1.25 1.22 1.18 307 614 H-Filed Strength at 15 cm from the edges surrounding the EUT(A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.19 0.18 0.18 0.19 0.20 0.815 1.63 ※※※※※※THEEND※※※※※※ Page8 / 8


Document Created: 2019-02-18 08:38:12
Document Modified: 2019-02-18 08:38:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC