MPE_Test_Report

FCC ID: 2APUPSCCW01

RF Exposure Info

Download: PDF
FCCID_4024827

FCC MPE TEST REPORT FCC ID: 2APUPSCCW01 Product： ROKK wireless charger Trade Name： Scanstrut Model Name： SC-CW-01 SC-CW-01E, SC-CW-02, SC-CW-02E, Serial Model： SC-CW-03, SC-CW-03E Report No.： UNIA2018091310-2FR-01 Prepared for Scanstrut Ltd. 5 Darts Business Park, Clyst St. George, Exeter, United Kingdom Prepared by Shenzhen United Testing Technology Co., Ltd. 2F, Annex Bldg, Jiahuangyuan Tech Park, #365 Baotian 1 Rd, Tiegang Community, Xixiang Str, Bao'an District, Shenzhen, China Page 1 / 8

TEST RESULT CERTIFICATION Applicant’s name ............. : Scanstrut Ltd. 5 Darts Business Park, Clyst St. George, Exeter, United Address .............................. : Kingdom Manufacture's Name ........ : Scanstrut Ltd. 5 Darts Business Park, Clyst St. George, Exeter, United Address .............................. : Kingdom Product description Product name..................... : ROKK wireless charger Model name ............................ : SC-CW-01 Serial Model ....................... : SC-CW-01E, SC-CW-02, SC-CW-02E, SC-CW-03, SC-CW-03E FCC KDB 680106 D01 RF Exposure Wireless Charging Standards ......................... : Apps v03 This device described above has been tested by Shenzhen United Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of UNI, this document may be altered or revised by Shenzhen United Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. Date of Test .............................................. : Date (s) of performance of tests .............. : May 08, 2018 ~ May 18, 2018 Date of Issue............................................. : Sep. 28, 2018 Test Result ................................................. : Pass Prepared by: Kahn yang/Editor Reviewer: Sherwin Qian/Supervisor Approved & Authorized Signer: Liuze/Manager Page 2 / 8

Note: For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. Channel List Channel Frequency(KHz) Channel Frequency(MHz) 01 125 The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. 1. SUMMARY OF TEST RESULTS 1.1 Test procedures according to the technical standards: FCC KDB 680106 D01 RF Exposure Wireless Charging Apps v03 FCC CFR 47 Standard Section Test Item Judgment Remark Electric Field Strength (E) (V/m) PASS FCC CFR 47 part1, 1.1310 KDB680106 D01 v03(3)(3) Magnetic Field Strength (H) (A/m) PASS 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 All emissions,radiated(<30M)(9KHz-30MHz) ±2.45dB 2 Temperature ±0.5°C 3 Humidity ±2% Page 3 / 8

1.3 Test Instruments Description Brand Model No. Frequency Range Calibrated Until Broadband Field Meter NARDA NBM-550 –– Jan. 01, 2019 Magnetic Field Meter NARDA ELT-400 1–400kHz Jan. 01, 2019 Magnetic Probe NARDA HF-3061 300kHz–30MHz Jan. 01, 2019 Magnetic Probe NARDA HF-0191 27–1000MHz Jan. 01, 2019 Broadband Field Meter NARDA NBM-550 –– Jan. 01, 2019 Electric Field Meter COMBINOVA EFM 200 5Hz–400kHz Jan. 01, 2019 E-Field Probe NARDA EF-0391 100kHz–3GHz Jan. 01, 2019 E-Field Probe NARDA EF-6091 100MHz–60GHz Jan. 01, 2019 NOTE: The calibration interval of the above test instruments is 12 months. Page 4 / 8

2. MAXIMUM PERMISSIBLE EXPOSURE 2.1 MAXIMUM PERMISSIBLE EXPOSURE Limit of Maximum Permissible Exposure Limits for Occupational / Controlled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) |E|²,|H|²or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Limits for General Population / Uncontrolled Exposure Frequency Range Electric Field Magnetic Field Power Density (S) Averaging Time (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) |E|²,|H|²or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180 / f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1 30 Note 1: f = frequency in MHz ; *Plane-wave equivalent power density. 2: For the applicable limit, see FCC 1.1310, 680106 D01 RF Exposure Wireless Charging Apps v03. 3: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. Page 5 / 8

3. TEST PROCEDURE a. For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. 4.1 TEST SETUP 4.2 TEST PHOTO Page 6 / 8

4.3 RESULT OF MAXIMUM PERMISSIBLE EXPOSURE For Full load mode: E-Filed Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.22 1.16 1.21 1.18 1.20 184.2 614 H-Filed Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.22 0.20 0.24 0.18 0.19 0.489 1.63 For Half Load for wrist band mode: E-Filed Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.18 1.15 1.20 1.17 1.16 184.2 614 H-Filed Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.18 0.20 0.18 0.20 0.21 0.489 1.63 Page 7 / 8

For Half Load for shoepod mode: E-Filed Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.16 1.21 1.22 1.20 1.22 184.2 614 H-Filed Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.20 0.22 0.18 0.18 0.20 0.489 1.63 For No load mode: E-Filed Strength at 15 cm from the edges surrounding the EUT (V/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (V/m) (V/m) 0.125 1.17 1.20 1.19 1.21 1.18 184.2 614 H-Filed Strength at 15 cm from the edges surrounding the EUT (A/m) Frequency Test Test Test Test Test Reference Limits Test Range (MHz) Position A Position B Position C Position D Position E Limit (A/m) (A/m) 0.125 0.20 0.20 0.18 0.16 0.16 0.489 1.63 ※※※※※THE END※※※※※ Page 8 / 8


Document Created: 2018-09-28 14:39:44
Document Modified: 2018-09-28 14:39:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC