user_manual

FCC ID: 2APU5-WPC388

Users Manual

Download: PDF
FCCID_4049482

WPC388 Wireless Power Charger Instruction Manual Congratulations on your purchase of the WPC388 Wireless Power Charger. To ensure a long service life and optimum functionality of the product we recommend that you read this manual carefully. Package Content 1 Wireless Charger 1 USB Cable 1 User Manual Specifications Input: 5.0V/2A Wireless Output: 5.0V/1.0A 5W Charging Efficiency: ≤70% Instructions 1. Insert the USB port side of charging cable into power adapter Must use 5V/2A adapter for wireless charging. 2. Insert another end Micro USB of USB cable into Micro USB port to the wireless charger. 3. There are five positons in it by pressing the back button to pull up or down the round plate. so that you can put your phone horizontal or vertical on it, you can get best charging performance. Note: This wireless charger can only charge phones that support QI. General usage tips . Do not place any metal objects between the smartphone and the wireless charger The smartphone may not charge properly. . To ensure more effective charging, remove protective cases. . Charging time depends on battery capacity, phone input specifications, current phone energy consumption, phone position on the wireless charger, charging distance, etc. Safety information Warning: Failure to follow these safety instructions could result in fire, electric shock, Injury, damage or others. Do not drop, disassemble or modify this product. Do not expose this product to fire or excessive heat. Do not expose this product to water or excessive humidity. Do not put any metal on the surface of wireless charging coil when working, otherwise it will heat up and burn or hurt yourself. Only use the USB input cable provided with the product to charge it.

FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. RF Exposure: A distance of 15 cm shall be maintained between the antenna and users, and the transmitter may not be co-located with any other transmitter or antenna.


Document Created: 2018-10-25 16:35:25
Document Modified: 2018-10-25 16:35:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC