User Manual

FCC ID: 2APU5-WPC488-10W

Users Manual

Download: PDF
FCCID_4349861

Wireless Power Charger Instruction Manual 4. When 1he smartphone is fully charged, remove it from the wireless charger. Congratulatlons on your purchase of the Wireless Power Charger. When the charging rs completed, your smartphone will Indicate that the battery ls full. (check the smartphone's battery status using the charging Jeon displayed To ensure a long service life and optimum functionality of the product we on the screen) recommend that you read this manual carefully. 5. To charge other device.plug the USB cable Into the USB port and coMact the other Package Content end with your device, when this wireless charger is powered with wall charger. Wireless Charger *1; USB Cable *1; User Manual *1 General usage tips Specifications 1. Do not place any metal objects between the smartphone and the wireless charger. lnput(Micro port orTyp&-C port): DC 5V/2A; DC 9V/1.67A 2. To ensure more effective charging, remove protective cases. Wireless Output: DC 5V/1A (SN); DC 9V/1.1A (10W) 3. Charging time depends on battery capacity.phone Input spectlicatfons,cumint phone USB OJtput: DC 5V/1A energy consumptlon,phone position on the wireless charger,charglng dlstenoe, etc. Charging distanoe <;;6mm Typa-C port Is only used for lnputl Posslble causes of wfreless charging problems 1. Your device is not compatible with the Qi wireless charging standard. General infonnation 1. This charger works with all Ql-compatlble d&vlces (please make sure your 2. Your device ls placed on the wireless charger In a wrong position.See the manuel of device is Qi-<XJmpatibla) your smartphone to find the exact place of the built-in Qi wireless charging receiver. 2. Devices are available with built-in or external wireless charging receivers. 3. A protective case of the smartphone or aoother object on the back of the 3. For oonmal operation, no weaker than DC 5V, 2A charger is required. smartphone is blocking the charging process. 4. For a fast wfreless charging mode, use the Quick Charger 2.0/3.0 compatlble 4. The USB charger rs too weak, defectll/e or unplugged from tha electr1c socket. charger and compatible smartphones. 5. The charging cable ls unplugged, broken or too weak for correct functlonlng. 5. This wireless charger can charger smartphones with oon-metal protective case or slllcone covers that are no thicker than 6mm. Safety Information Instructions 1 . Do oot drop or cause an Impact on the device. 2. Do oot disassemble, modify or repair your device. 1. Connect the wlreless charger with the Included USB charging cable or another 3. Keep away from humidity and heat. good performance Type-C charging cable to the wall charger and plug the 4. Keep rt beyond the reach of children. charger Into an electronic socket, the red led will light up. 2. Place the smartphone with the display facing up on the centre of the wireless Precaution! charger or adjust the placement position until the charging process starts, the 1. Metal objects placed on top of charging devices might result matfunctlon of the blue led lights up. Item and damage the charging device on top of It. 3. To save energy, unplug the charger when oot in use. 2. Do oot operate the Item on top of any metal work table or surface. MODEL: WPC488-10W

FCC ID: 2APU5-WPC488-10W Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.


Document Created: 2019-07-03 19:25:10
Document Modified: 2019-07-03 19:25:10
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC