Test report

FCC ID: 2APTAFA-DC900-TXHH

Test Report

Download: PDF
FCCID_4443889

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 E-mail: ctl@ctl-lab.com TEST REPORT FCC PART 15.249 Report Reference No. ................. : CTL1908131052-WF Compiled by: Happy Guo ( position+printed name+signature) (File administrators) Tested by: Nice Nong ( position+printed name+signature) (Test Engineer) Approved by: Ivan Xie ( position+printed name+signature) (Manager) Product Name.............................. : 900MHz Microphone Handheld Transmitter Model/Type reference ................. : FA-DC900-TXHH FA-SC900-TXHH, KWM-DC900- TXHH, KWM-SC900-TXHH, List Model(s) ................................ : TBD-DC900-TXHH, TBD-SC900-TXHH, OEM-DC900-TXHH, OEM-SC900-TXHH Trade Mark ................................... : FCC ID .......................................... : 2APTAFA-DC900-TXHH Applicant’s name ........................ : FLUENT AUDIO INC 8362 TAMARACK VILLAGE SUITE# 119-252 Address of applicant .................. : WOODBURY, MINNESOTA 55125 USA Test Firm ...................................... : Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Address of Test Firm .................. : Nanshan District, Shenzhen, China 518055 Test specification ........................ : Standard ........................................ : FCC Part 15.249:Operation within the bands 920-928 MHz, 2400-2483.5 MHz, 5725-5850 MHz and 24.0 - 24.25 GHz. TRF Originator .............................. : Shenzhen CTL Testing Technology Co., Ltd. Master TRF ................................... : Dated 2011-01 Date of receipt of test item ............ : Aug. 15, 2019 Date of sampling ........................... : Aug. 15, 2019 Date of Test Date .......................... : Aug. 15, 2019–Sep. 05, 2019 Data of Issue ................................. : Sep. 06, 2019 Result ........................................... : Pass Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.

V1.0 Page 2 of 25 Report No.: CTL1908131052-WF TEST REPORT Sep. 06, 2019 Test Report No. : CTL1908131052-WF Date of issue Equipment under Test : 900MHz Microphone Handheld Transmitter Model /Type : FA-DC900-TXHH FA-SC900-TXHH, KWM-DC900- TXHH, KWM-SC900-TXHH, TBD-DC900-TXHH, Listed Models : TBD-SC900-TXHH, OEM-DC900-TXHH, OEM-SC900-TXHH Applicant : FLUENT AUDIO INC : 8362 TAMARACK VILLAGE SUITE# 119-252 Address WOODBURY, MINNESOTA 55125 USA Manufacturer : ENPING SANREN SOUND EQUIPMENT FACTORY Address : 3rd&4th Floor, NO.2 Building, Enlong Science and Technology Park, Enping City, Guangdong, China Test result Pass * * In the configuration tested, the EUT complied with the standards specified page 5. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the issuing testing laboratory.

V1.0 Page 3 of 25 Report No.: CTL1908131052-WF ** Modified History ** Revisions Description Issued Data Report No. Remark Version 1.0 Initial Test Report Release 2019-09-06 CTL1908131052-WF Tracy Qi

V1.0 Page 4 of 25 Report No.: CTL1908131052-WF Table of Contents Page 1. SUMMARY............................................................................................................................................................ 5 1.1. TEST STANDARDS ..................................................................................................................................................... 5 1.2. TEST DESCRIPTION ........................................................................................................................................................ 5 1.3. TEST FACILITY .............................................................................................................................................................. 6 1.4. STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................................... 6 2. GENERAL INFORMATION....................................................................................................................................... 8 2.1. ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 8 2.2. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 8 2.3. DESCRIPTION OF TEST MODES AND TEST FREQUENCY .......................................................................................................... 8 2.4. EQUIPMENTS USED DURING THE TEST .............................................................................................................................. 9 2.5. RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................................................ 9 2.6. MODIFICATIONS ........................................................................................................................................................... 9 3. TEST CONDITIONS AND RESULTS ......................................................................................................................... 10 3.1. CONDUCTED EMISSIONS TEST ....................................................................................................................................... 10 3.2. RADIATED EMISSIONS AND BAND EDGE .......................................................................................................................... 11 3.3. OCCUPIED BANDWIDTH MEASUREMENT ......................................................................................................................... 17 3.4. ANTENNA REQUIREMENT ............................................................................................................................................. 19 4. TEST SETUP PHOTOS OF THE EUT ........................................................................................................................ 20 5. EXTERNAL AND INTERNAL PHOTOS OF THE EUT .................................................................................................. 21

V1.0 Page 5 of 25 Report No.: CTL1908131052-WF 1. SUMMARY 1.1. TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15.249: Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5875 MHz, and 24.0 - 24.25 GHz. ANSI C63.10: 2013: American National Standard for Testing Unlicensed Wireless Devices 1.2. Test Description FCC PART 15.249 FCC Part 15.249(a) Field Strength of Fundamental PASS FCC Part 15.209 Spurious Emission PASS FCC Part 15.209 Band edge PASS FCC Part 15.215(c) 20dB bandwidth PASS FCC Part 15.207 Conducted Emission N/A FCC Part 15.203 Antenna Requirement PASS

V1.0 Page 6 of 25 Report No.: CTL1908131052-WF 1.3. Test Facility 1.3.1 Address of the test laboratory Shenzhen CTL Testing Technology Co., Ltd. Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan, Shenzhen 518055 China There is one 3m semi-anechoic chamber and two line conducted labs for final test. The Test Sites meet the requirements in documents ANSI C63.4 and CISPR 32/EN 55032 requirements. 1.3.2 Laboratory accreditation The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L7497 Shenzhen CTL Testing Technology Co., Ltd. has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC 17025: 2005 General Requirements) for the Competence of Testing and Calibration Laboratories. A2LA-Lab Cert. No. 4343.01 Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. IC Registration No.: 9518B CAB identifier: CN0041 The 3m alternate test site of Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements with Registration No.: 9518B on Jan. 22, 2019. FCC-Registration No.: 399832 Designation No.: CN1216 Shenzhen CTL Testing Technology Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 399832, December 08, 2017. 1.4. Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to CISPR 16 - 4 “Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC Measurements“ and is documented in the Shenzhen CTL Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for CTL laboratory is reported: Measurement Test Notes Uncertainty Transmitter power conducted ±0.57 dB (1) Transmitter power Radiated ±2.20 dB (1) Conducted spurious emission 9KHz-40 GHz ±2.20 dB (1) Occupied Bandwidth ±0.01ppm (1) Radiated Emission 30~1000MHz ±4.10dB (1) Radiated Emission Above 1GHz ±4.32dB (1)


V1.0 Page 8 of 25 Report No.: CTL1908131052-WF 2. GENERAL INFORMATION 2.1. Environmental conditions During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 2.2. General Description of EUT Product Name: 900MHz Microphone Handheld Transmitter Model/Type reference: FA-DC900-TXHH Power supply: DC 3V from battery 900MHz ISM Band wireless Operation frequency: 902.3MHz~927.6MHz Modulation: FM Channel number: 85 Channel separation: 0.3MHz Antenna type: Monopole antenna Antenna gain: 0 dBi Note: For more details, please refer to the user’s manual of the EUT. 2.3. Description of Test Modes and Test Frequency The Applicant provides communication tools software to control the EUT for staying in continuous transmitting (Duty Cycle more than 98%) and receiving mode for testing. There are 85 channels provided to the EUT and Channel 01/43/85 were selected for test. Operation Frequency： Channel Frequency (MHz) 01 902.3 02 902.6 03 902.9 ... ... 41 914.3 42 914.6 43 915.0 44 915.3 45 915.6 ... ... 83 927.0 84 927.3 85 927.6 Note: The line display in grey were the channel selected for testing

V1.0 Page 9 of 25 Report No.: CTL1908131052-WF 2.4. Equipments Used during the Test Calibration Calibration Test Equipment Manufacturer Model No. Serial No. Date Due Date 3560.6550.1 LISN R&S ENV216 2019/05/20 2020/05/19 2 LISN R&S ESH2-Z5 860014/010 2019/05/20 2020/05/19 Sunol Sciences Bilog Antenna JB1 A061713 2019/05/20 2020/05/19 Corp. EMI Test Receiver R&S ESCI 103710 2019/05/20 2020/05/19 Spectrum Analyzer Agilent E4407B MY41440676 2019/05/20 2020/05/19 Spectrum Analyzer Agilent N9020 US46220290 2019/05/20 2020/05/19 Power Meter Anritsu ML2487B 110553 2019/05/20 2020/05/19 Power Sensor Anritsu MA2411B 100345 2019/05/20 2020/05/19 Controller EM Controller EM Electronics N/A 2019/05/20 2020/05/19 1000 Sunol Sciences Horn Antenna DRH-118 A062013 2019/05/20 2020/05/19 Corp. Active Loop SCHWARZBE FMZB1519 1519-037 2019/05/20 2020/05/19 Antenna CK Amplifier Agilent 8349B 3008A02306 2019/05/20 2020/05/19 Amplifier Agilent 8447D 2944A10176 2019/05/20 2020/05/19 Temperature/Humi Gangxing CTH-608 02 2019/05/20 2020/05/19 dity Meter 9SH10-2700/X1 High-Pass Filter K&L N/A 2019/05/20 2020/05/19 2750-O/O 41H10-1375/U1 High-Pass Filter K&L N/A 2019/05/20 2020/05/19 2750-O/O HUBER+SUHN SUCOFLEX Coaxial Cables 10m 2019/05/20 2020/05/19 ER 104PEA-10M HUBER+SUHN SUCOFLEX Coaxial Cables 3m 2019/05/20 2020/05/19 ER 104PEA-3M HUBER+SUHN SUCOFLEX Coaxial Cables 3m 2019/05/20 2020/05/19 ER 104PEA-3M RF Cable Megalon RF-A303 N/A 2019/05/20 2020/05/19 The calibration interval was one year 2.5. Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended to comply with Section 15.249 of the FCC Part 15, Subpart C Rules. 2.6. Modifications No modifications were implemented to meet testing criteria.

V1.0 Page 10 of 25 Report No.: CTL1908131052-WF 3. TEST CONDITIONS AND RESULTS 3.1. Conducted Emissions Test LIMIT FCC CFR Title 47 Part 15 Subpart C Section 15.207 Limit (dBuV) Frequency range (MHz) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 * Decreases with the logarithm of the frequency. TEST CONFIGURATION TEST PROCEDURE 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. The EUT is a tabletop system; a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10:2013. 2. Support equipment, if needed, was placed as per ANSI C63.10:2013. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10:2013. 4. The adapter received AC120V/60Hz power through a Line Impedance Stabilization Network (LISN) which supplied power source and was grounded to the ground plane. 5. All support equipments received AC power from a second LISN, if any. 6. The EUT test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 KHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. TEST RESULTS Not applicable to this device, which is powered by battery.

V1.0 Page 11 of 25 Report No.: CTL1908131052-WF 3.2. Radiated Emissions and Band Edge Limit For intentional device, according to § 15.209(a), the general requirement of field strength of radiated emission out of authorized band shall not exceed the following table at a 3 meters measurement distance. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) Radiated emission limits Frequency (MHz) Distance (Meters) Radiated (dBμV/m) Radiated (μV/m) 0.009-0.49 3 20log(2400/F(KHz))+40log(300/3) 2400/F(KHz) 0.49-1.705 3 20log(24000/F(KHz))+ 40log(30/3) 24000/F(KHz) 1.705-30 3 20log(30)+ 40log(30/3) 30 30-88 3 40.0 100 88-216 3 43.5 150 216-960 3 46.0 200 Above 960 3 54.0 500 TEST CONFIGURATION (A) Radiated Emission Test Set-Up, Frequency Below 30MHz (B) Radiated Emission Test Set-Up, Frequency below 1000MHz (C) Radiated Emission Test Set-Up, Frequency above 1000MHz

V1.0 Page 12 of 25 Report No.: CTL1908131052-WF Test Procedure 1. Below 1GHz measurement the EUT is placed on a turntable which is 0.8m above ground plane, and above 1GHz measurement EUT was placed on a low permittivity and low loss tangent turn table which is 1.5m above ground plane. 2. Maximum procedure was performed by raising the receiving antenna from 1m to 4m and rotating the turn table from 0℃ to 360℃ to acquire the highest emissions from EUT 3. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 4. Repeat above procedures until all frequency measurements have been completed. TEST RESULTS Remark: 1. For below 1GHz testing recorded worst at low channel. 2. Radiated emission test from 9 KHz to 10th harmonic of fundamental was verified, and no emission found except system noise floor in 9 KHz to 30MHz and not recorded in this report.

V1.0 Page 13 of 25 Report No.: CTL1908131052-WF For 30MHz-1GHz Horizontal Vertical

V1.0 Page 14 of 25 Report No.: CTL1908131052-WF Frequency(MHz): 902.3 Polarity: Horizontal Emission Raw Antenna Cable Correction Frequency Limit Margin Pre-amplifier No. Level Value Factor Factor Factor (MHz) (dBuV/m) (dB) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 1 734.22 41.40 PK 46.00 4.70 47.17 20.62 1.91 28.30 -5.77 2 900.00 42.22 PK 46.00 3.78 46.11 22.10 2.16 28.15 -3.89 3 902.30 98.27 PK 114.00 15.73 100.35 23.85 2.20 28.13 -2.08 3 902.30 92.49 AV 94.00 1.51 94.57 23.85 2.20 28.13 -2.08 4 1804.60 57.96 PK 74.00 16.04 62.23 27.17 4.01 35.45 -4.27 4 1804.60 51.02 AV 54.00 2.98 55.29 27.17 4.01 35.45 -4.27 5 2706.90 55.42 PK 74.00 18.58 55.76 29.33 4.94 34.61 -0.34 5 2706.90 48.76 AV 54.00 5.24 49.10 29.33 4.94 34.61 -0.34 6 3609.20 51.53 PK 74.00 22.47 49.13 32.08 5.95 35.62 2.40 6 3609.20 -- AV 54.00 -- -- -- -- -- -- 7 4511.50 47.54 PK 74.00 26.46 42.44 32.88 6.73 34.51 5.10 7 4511.50 -- AV 54.00 -- -- -- -- -- -- Frequency(MHz): 902.3 Polarity: Vertical Emission Raw Antenna Cable Correction Frequency Limit Margin Pre-amplifier No. Level Value Factor Factor Factor (MHz) (dBuV/m) (dB) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 1 734.22 41.75 PK 46.00 4.25 55.71 20.62 1.91 28.30 -5.77 2 900.00 40.20 PK 46.00 5.80 50.63 22.10 2.16 28.15 -3.89 3 902.30 97.23 PK 114.00 16.77 99.31 23.85 2.20 28.13 -2.08 3 902.30 91.62 AV 94.00 2.38 93.70 23.85 2.20 28.13 -2.08 4 1804.60 56.09 PK 74.00 17.91 60.36 27.17 4.01 35.45 -4.27 4 1804.60 51.42 AV 54.00 2.58 55.69 27.17 4.01 35.45 -4.27 5 2706.90 54.56 PK 74.00 19.44 54.90 29.33 4.94 34.61 -0.34 5 2706.90 46.15 AV 54.00 7.85 46.49 29.33 4.94 34.61 -0.34 6 3609.20 51.13 PK 74.00 22.87 48.73 32.08 5.95 35.62 2.40 6 3609.20 -- AV 54.00 -- -- -- -- -- -- 7 4511.50 46.99 PK 74.00 27.01 41.89 32.88 6.73 34.51 5.10 7 4511.50 -- AV 54.00 -- -- -- -- -- -- REMARKS: 1. Emission level (dBuV/m) =Raw Value (dBuV)+Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m)+Cable Factor (dB)-Pre-amplifier Factor 3. Margin value = Limit value- Emission level. 4. -- Mean the PK detector measured value is below QP/AV limit. 5. The other emission levels were very low against the limit. RBW100KHz VBW300KHz for test at below 1GHz; RBW1MHz VBW3MHz Peak detector is for PK value, RBW 1MHz VBW10Hz Peak detector is for AV value for test at above 1GHz.

V1.0 Page 15 of 25 Report No.: CTL1908131052-WF Frequency(MHz): 915 Polarity: Horizontal Emission Raw Antenna Cable Correction Frequency Limit Margin Pre-amplifier No. Level Value Factor Factor Factor (MHz) (dBuV/m) (dB) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 1 747.35 42.27 PK 46.00 3.73 47.71 20.90 1.94 28.28 -5.44 2 900.00 33.34 PK 46.00 12.66 37.23 22.10 2.16 28.15 -3.89 3 915.00 98.40 PK 114.00 15.60 101.95 22.48 2.10 28.13 -3.55 3 915.00 92.12 AV 94.00 1.88 95.67 22.48 2.10 28.13 -3.55 4 1830.00 58.37 PK 74.00 15.63 62.46 27.31 4.04 35.43 -4.09 4 1830.00 52.19 AV 54.00 1.81 56.28 27.31 4.04 35.43 -4.09 5 2745.00 55.30 PK 74.00 18.7 55.43 29.47 4.98 34.58 -0.13 5 2745.00 49.46 AV 54.00 4.54 49.59 29.47 4.98 34.58 -0.13 6 3660.00 52.77 PK 74.00 21.23 50.00 32.39 6.01 35.64 2.77 6 3660.00 -- AV 54.00 -- -- -- -- -- -- 7 4575.00 48.13 PK 74.00 25.87 42.86 32.97 6.77 34.47 5.27 7 4575.00 -- AV 54.00 -- -- -- -- -- -- Frequency(MHz): 915 Polarity: Vertical Emission Raw Antenna Cable Correction Frequency Limit Margin Pre-amplifier No. Level Value Factor Factor Factor (MHz) (dBuV/m) (dB) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 1 747.35 41.30 PK 46.00 4.70 46.74 20.90 1.94 28.28 -5.44 2 900.00 32.60 PK 46.00 13.40 36.49 22.10 2.16 28.15 -3.89 3 915.00 97.29 PK 114.00 16.71 100.84 22.48 2.10 28.13 -3.55 3 915.00 91.41 AV 94.00 2.59 94.96 22.48 2.10 28.13 -3.55 4 1830.00 57.36 PK 74.00 16.64 61.45 27.31 4.04 35.43 -4.09 4 1830.00 51.48 AV 54.00 2.52 55.57 27.31 4.04 35.43 -4.09 5 2745.00 54.72 PK 74.00 19.28 54.85 29.47 4.98 34.58 -0.13 5 2745.00 48.18 AV 54.00 5.82 48.31 29.47 4.98 34.58 -0.13 6 3660.00 50.85 PK 74.00 23.15 48.08 32.39 6.01 35.64 2.77 6 3660.00 -- AV 54.00 -- -- -- -- -- -- 7 4575.00 46.04 PK 74.00 27.96 40.77 32.97 6.77 34.47 5.27 7 4575.00 -- AV 54.00 -- -- -- -- -- -- REMARKS: 1. Emission level (dBuV/m) =Raw Value (dBuV)+Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m)+Cable Factor (dB)-Pre-amplifier Factor 3. Margin value = Limit value- Emission level. 4. -- Mean the PK detector measured value is below QP/AV limit. 5. The other emission levels were very low against the limit. 6. RBW100KHz VBW300KHz for test at below 1GHz; RBW1MHz VBW3MHz Peak detector is for PK value, RBW 1MHz VBW10Hz Peak detector is for AV value for test at above 1GHz.

V1.0 Page 16 of 25 Report No.: CTL1908131052-WF Frequency(MHz): 927.6 Polarity: Horizontal Emission Raw Antenna Cable Correction Frequency Limit Margin Pre-amplifier No. Level Value Factor Factor Factor (MHz) (dBuV/m) (dB) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 1 759.44 43.83 PK 46.00 2.17 49.17 20.99 1.95 28.28 -5.34 2 960.00 32.27 PK 46.00 13.73 35.35 22.92 2.10 28.10 -3.08 3 927.60 97.98 PK 114.00 16.02 101.36 22.64 2.10 28.12 -3.38 3 927.60 92.32 AV 94.00 1.68 95.70 22.64 2.10 28.12 -3.38 4 1855.00 58.64 PK 74.00 15.36 62.54 27.44 4.06 35.40 -3.90 4 1855.00 52.29 AV 54.00 1.71 56.19 27.44 4.06 35.40 -3.90 5 2782.50 55.11 PK 74.00 18.89 55.02 29.61 5.02 34.54 0.09 5 2782.50 49.32 AV 54.00 4.68 49.23 29.61 5.02 34.54 0.09 6 3710.00 52.85 PK 74.00 21.15 49.72 32.70 6.07 35.65 3.13 6 3710.00 -- AV 54.00 -- -- -- -- -- -- 7 4637.50 47.31 PK 74.00 26.69 41.84 33.10 6.81 34.44 5.47 7 4637.50 -- AV 54.00 -- -- -- -- -- -- Frequency(MHz): 927.6 Polarity: Vertical Emission Raw Antenna Cable Correction Frequency Limit Margin Pre-amplifier No. Level Value Factor Factor Factor (MHz) (dBuV/m) (dB) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB/m) 1 759.44 39.12 PK 46.00 6.88 44.46 20.99 1.95 28.28 -5.34 2 960.00 31.51 PK 46.00 14.49 34.59 22.92 2.10 28.10 -3.08 3 927.60 96.80 PK 114.00 17.20 100.18 22.64 2.10 28.12 -3.38 3 927.60 90.24 AV 94.00 3.76 93.62 22.64 2.10 28.12 -3.38 4 1855.00 56.02 PK 74.00 17.98 59.92 27.44 4.06 35.40 -3.90 4 1855.00 51.65 AV 54.00 2.35 55.55 27.44 4.06 35.40 -3.90 5 2782.50 54.73 PK 74.00 19.27 54.64 29.61 5.02 34.54 0.09 5 2782.50 49.69 AV 54.00 4.31 49.60 29.61 5.02 34.54 0.09 6 3710.00 51.54 PK 74.00 22.46 48.41 32.70 6.07 35.65 3.13 6 3710.00 -- AV 54.00 -- -- -- -- -- -- 7 4637.50 45.48 PK 74.00 28.52 40.01 33.10 6.81 34.44 5.47 7 4637.50 -- AV 54.00 -- -- -- -- -- -- REMARKS: 1. Emission level (dBuV/m) =Raw Value (dBuV)+Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m)+Cable Factor (dB)-Pre-amplifier Factor 3. Margin value = Limit value- Emission level. 4. -- Mean the PK detector measured value is below QP/AV limit. 5. The other emission levels were very low against the limit. RBW100KHz VBW300KHz for test at below 1GHz; RBW1MHz VBW3MHz Peak detector is for PK value, RBW 1MHz VBW10Hz Peak detector is for AV value for test at above 1GHz.

V1.0 Page 17 of 25 Report No.: CTL1908131052-WF 3.3. Occupied Bandwidth Measurement Limit N/A Test Procedure The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the fundamental frequency was measured by spectrum analyzer with 3 KHz RBW and 10 KHz VBW. The 20dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 20dB. Test Configuration EUT SPECTRUM ANALYZER Test Results 99% OBW 20dB bandwidth Type Channel Result (KHz) (KHz) 01 85.272 79.34 FM 43 82.339 75.15 Pass 85 79.552 73.14 Test plot as follows:

V1.0 Page 18 of 25 Report No.: CTL1908131052-WF CH01 CH43 CH85

V1.0 Page 19 of 25 Report No.: CTL1908131052-WF 3.4. Antenna Requirement Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. Refer to statement below for compliance. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. Further, this requirement does not apply to intentional radiators that must be professionally installed. Test Result: The directional gains of antenna used for transmitting is 0 dBi, and the antenna connector is designed with permanent attachment and no consideration of replacement. Please see EUT photo for details. Antenna

V1.0 Page 20 of 25 Report No.: CTL1908131052-WF 4. Test Setup Photos of the EUT

V1.0 Page 21 of 25 Report No.: CTL1908131052-WF 5. External and Internal Photos of the EUT External Photos of EUT

V1.0 Page 22 of 25 Report No.: CTL1908131052-WF

V1.0 Page 23 of 25 Report No.: CTL1908131052-WF

V1.0 Page 24 of 25 Report No.: CTL1908131052-WF Internal Photos of EUT Antenna

V1.0 Page 25 of 25 Report No.: CTL1908131052-WF ********************** End of Report **********************


Document Created: 2019-09-12 18:38:57
Document Modified: 2019-09-12 18:38:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC