14_SIREN TestRpt_NFC

FCC ID: 2APSE-SIREN

Test Report

Download: PDF
FCCID_4156840

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 1 of 29 Report No.: SZAWW181220002-03 FCC TEST REPORT For Roo Inc. Keypad Siren Model No.: SIREN, SIREN1, SIREN2, SIREN3, SIREN4,SIREN5, SIREN6, SIREN7, SIREN8, SIREN9 Prepared For : Roo Inc. Address : 41 E 11th Street 10th Floor, New York City, New York, United States, 10003 Prepared By : Shenzhen Anbotek Compliance Laboratory Limited Address : 1/F, Building D, Sogood Science and Technology Park, Sanwei community, Hangcheng Street, Bao'an District, Shenzhen, Guangdong, China.518102 Tel: (86) 755-26066440 Fax: (86) 755-26014772 Report Number : SZAWW181220002-03 Date of Receipt : Dec. 20, 2018 Date of Test : Dec. 20, 2018~Jan. 08, 2019 Date of Report : Jan. 08, 2019 Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 2 of 29 Report No.: SZAWW181220002-03 Contents 1. General Information..................................................................................................................................................4 1.1. Client Information......................................................................................................................................... 4 1.2. Description of Device (EUT)........................................................................................................................ 4 1.3. Auxiliary Equipment Used During Test........................................................................................................ 4 1.4. Description of Test Modes.............................................................................................................................5 1.5. List of channels..............................................................................................................................................5 1.7. Test Equipment List....................................................................................................................................... 7 1.8. Measurement Uncertainty..............................................................................................................................8 1.9. Description of Test Facility........................................................................................................................... 8 2. Test Procedure...........................................................................................................................................................9 3. Summary of Test Results........................................................................................................................................ 10 4. Conducted Emission Test........................................................................................................................................11 4.1. Test Standard and Limit...............................................................................................................................11 4.2. Test Setup.....................................................................................................................................................11 4.3. Test Procedure..............................................................................................................................................11 4.4. Test Data...................................................................................................................................................... 11 5. Radiation Spurious Emission..................................................................................................................................16 5.1. Test Standard and Limit...............................................................................................................................16 5.2. Test Setup.....................................................................................................................................................16 5.3. Test Procedure..............................................................................................................................................17 5.4. Test Data...................................................................................................................................................... 18 6. Frequency Tolerance...............................................................................................................................................22 6.1. Test Standard and Limit...............................................................................................................................22 6.2. Test Setup.....................................................................................................................................................22 6.3. Test Procedure..............................................................................................................................................22 6.4. Test Data...................................................................................................................................................... 22 7. 20dB Bandwidth..................................................................................................................................................... 24 7.1. Test Standard and Limit...............................................................................................................................24 7.2. Test Setup.....................................................................................................................................................24 7.3. Test Procedure..............................................................................................................................................24 7.4. Test Data...................................................................................................................................................... 24 8. Antenna Requirement............................................................................................................................................. 26 8.1. Test Standard and Requirement................................................................................................................... 26 8.2. Antenna Connected Construction................................................................................................................ 26 APPENDIX I -- TEST SETUP PHOTOGRAPH....................................................................................................... 27 APPENDIX II -- EXTERNAL PHOTOGRAPH....................................................................................................... 28 APPENDIX III -- INTERNAL PHOTOGRAPH.......................................................................................................29 Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Anbotek Shenzhen Anbotek Compliance Laboratory Limited Product Safety FCC ID: 2APSE—SIREN Page 3 of 29 Report No.: SZAWW181220002—03 TEST REPORT Applicant Roo Inc. Manufacturer Roo Inc. Product Name Keypad Siren SIREN, SIREN1, SIREN2, SIREN3, SIREN4,SIRENS, SIREN6, SIRENT7, SIREN®, Model No. SIRENY Trade Mark Kangaroo Rating(s) Input: DC 5V, 2.4A(via adapter input: AC 100~240V, 50/60Hz, 0.4A) Test Standard(s) FCC Part15 Subpart C 2018, Section 15.225 Test Method(s) ANSI €63.10: 2013 The device described above is tested by Shenzhen Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC Part 15 Subpart C requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Shenzhen Anbotek Compliance Laboratory Limited. Date of Test Dec. 20, 2018~Jan. 08, 2019 0 L’}\fij fi@l Prepared By (Engineer / Oliay Yang) Snij Me’} Reviewer (Supervisor / Snowy Meng) Approved & Authorized Signer Sel sho (Manager / Sally Zhang) Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755—26066440 Fax:(86)755—26014772 www.anbotek.com ~Code:AB—RF—O05—a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 4 of 29 Report No.: SZAWW181220002-03 1. General Information 1.1. Client Information Applicant : Roo Inc. Address : 41 E 11th Street 10th Floor, New York City, New York, United States, 10003 Manufacturer : Roo Inc. Address : 41 E 11th Street 10th Floor, New York City, New York, United States, 10003 Factory : Roo Inc. Address : 41 E 11th Street 10th Floor, New York City, New York, United States, 10003 1.2. Description of Device (EUT) Product Name : Keypad Siren SIREN, SIREN1, SIREN2, SIREN3, SIREN4,SIREN5, SIREN6, SIREN7, SIREN8, SIREN9 Model No. : (Note: All samples are the same except the name, so we prepare "SIREN" for test only.) Trade Mark : Kangaroo Test Power Supply : AC 120V, 60Hz for adapter / AC 240V, 60Hz for adapter Test Sample No. : S1(Normal Sample), S2(Engineering Sample) Operation Frequency: 13.56MHz Number of Channel: 1 Channels Product : Modulation Type: RFID Description Antenna Type: PCB Antenna Antenna Gain(Peak): 0 dBi Remark: 1) For a more detailed features description, please refer to the manufacturer’s specifications or the User’s Manual. 2)This report is for NFC module. 1.3. Auxiliary Equipment Used During Test Adapter : Model: A122-0502400UB INPUT: 100-240V~50/60Hz 0.4A Max OUTPUT: DC 5V, 2400mA Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 5 of 29 Report No.: SZAWW181220002-03 1.4. Description of Test Modes To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Description Mode 1 CH01 1.5. List of channels Channel Freq. (MHz) 01 13.56 Note: 1. The engineering test program was provided and the EUT was programmed to be in continuously transmitting mode. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 6 of 29 Report No.: SZAWW181220002-03 1.6. Description Of Test Setup CE USB AC Line E-1 E-2 EUT Adapter LISN 0.8m Table Table 1.5m RE USB AC Line E-1 E-2 EUT Adapter 0.8m Table Table 1.5m Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 7 of 29 Report No.: SZAWW181220002-03 1.7. Test Equipment List Cal. Item Equipment Manufacturer Model No. Serial No. Last Cal. Interval L.I.S.N. 1. Artificial Mains Rohde & Schwarz ENV216 100055 Nov. 05, 2018 1 Year Network 2. EMI Test Receiver Rohde & Schwarz ESPI3 101604 Nov. 05, 2018 1 Year 3. RF Switching Unit Compliance Direction RSU-M2 38303 Nov. 05, 2018 1 Year 4. Spectrum Analysis Agilent E4407B US39390582 Nov. 05, 2018 1 Year MAX Spectrum 5. Agilent N9020A MY51170037 Nov. 05, 2018 1 Year Analysis 6. Preamplifier SKET Electronic BK1G18G30D KD17503 Nov. 05, 2018 1 Year Double Ridged Horn Instruments 7. GTH-0118 351600 Nov. 20, 2018 1 Year Antenna corporation Bilog Broadband 8. Schwarzbeck VULB9163 VULB 9163-289 Nov. 19, 2018 1 Year Antenna 9. Loop Antenna Schwarzbeck FMZB1519B 00053 Nov. 20, 2018 1 Year LB-180400-K 10. Horn Antenna A-INFO J211060628 Nov. 20, 2018 1 Year F 11. Pre-amplifier SONOMA 310N 186860 Nov. 05, 2018 1 Year EMI Test Software 12. SHURPLE N/A N/A N/A N/A EZ-EMC RF Test Control 13. YIHENG YH3000 2017430 Nov. 05, 2018 1 Year System 14. Power Sensor DAER RPR3006W 15I00041SN045 Nov. 05, 2018 1 Year 15. Power Sensor DAER RPR3006W 15I00041SN046 Nov. 05, 2018 1 Year MXA Spectrum 16. Agilent N9020A MY51170037 Nov. 05, 2018 1 Year Analysis MXG RF Vector Signal 17. Agilent N5182A MY48180656 Nov. 05, 2018 1 Year Generator 18. Signal Generator Agilent E4421B MY41000743 Nov. 05, 2018 1 Year 19. DC Power Supply IVYTECH IV3605 1804D360510 Apr. 02, 2018 1 Year Constant Temperature 20. ZHONGJIAN ZJ-KHWS80B N/A Nov. 01, 2018 1 Year Humidity Chamber Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 8 of 29 Report No.: SZAWW181220002-03 1.8. Measurement Uncertainty Radiation Uncertainty : Ur = 3.9 dB (Horizontal) Ur = 3.8 dB (Vertical) Conduction Uncertainty : Uc = 3.4 dB 1.9. Description of Test Facility The test facility is recognized, certified, or accredited by the following organizations: FCC-Registration No.: 184111 Shenzhen Anbotek Compliance Laboratory Limited, EMC Laboratory has been registed and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No. 184111, July 31, 2017. ISED-Registration No.: 8058A-1 Shenzhen Anbotek Compliance Laboratory Limited, EMC Laboratory has been registered and fully described in a report filed with the (ISED) Innovation, Science and Economic Development Canada. The acceptance letter from the ISED is maintained in our files. Registration 8058A-1, June 13, 2016. Test Location Shenzhen Anbotek Compliance Laboratory Limited. 1/F, Building D, Sogood Science and Technology Park, Sanwei community, Hangcheng Street, Bao'an District, Shenzhen, Guangdong, China.518102 Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 9 of 29 Report No.: SZAWW181220002-03 2. Test Procedure GENERAL: This report shall NOT be reproduced except in full without the written approval of Shenzhen Anbotek Compliance Laboratory Limited. The EUT was transmitting a test signal during the testing. RADIATION INTERFERENCE: The test procedure used was ANSI STANDARD C63.10-2013 using a spectrum analyzer with a pre-selector. The analyzer was calibrated in dB above a microvolt at the output of the antenna. The resolution bandwidth was 100KHz and the video bandwidth was 300KHz up to 1.0GHz and 1.0MHz with a video BW of 3.0MHz above 1.0GHz. The ambient temperature of the EUT was 74.3oF with a humidity of 69%. FORMULA OF CONVERSION FACTORS: The Field Strength at 3m was established by adding the meter reading of the spectrum analyzer (which is set to read in units of dBuV) to the antenna correction factor supplied by the antenna manufacturer. The antenna correction factors are stated in terms of dB. The gain of the Preselector was accounted for in the Spectrum Analyzer Meter Reading. Example: Freq (MHz) METER READING + ACF = FS 33 20 dBuV + 10.36 dB = 30.36 dBuV/m @ 3m ANSI STANDARD C63.10-2013 10.1.7 MEASUREMENT PROCEDURES: The EUT was placed on a table 80 cm high and with dimensions of 1m by 1.5m. The EUT was placed in the center of the table (1.5m side). The table used for radiated measurements is capable of continuous rotation. When an emission was found, the table was rotated to produce the maximum signal strength. At this point, the antenna was raised and lowered from 1m to 4m. The antenna was placed in both the horizontal and vertical planes. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 10 of 29 Report No.: SZAWW181220002-03 3. Summary of Test Results Standard Section Test Item Result 15.203/15.247(c) Antenna Requirement PASS 15.207 Conducted Emission PASS 15.205/15.209 Spurious Emission PASS Frequency Tolerance PASS 15.215 (c) 20dB Occupied Bandwidth PASS Remark: “N/A” is an abbreviation for Not Applicable. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 11 of 29 Report No.: SZAWW181220002-03 4. Conducted Emission Test 4.1. Test Standard and Limit Test Standard FCC Part15 Section 15.207 Maximum RF Line Voltage (dBuV) Frequency Quasi-peak Level Average Level Test Limit 150kHz~500kHz 66 ~ 56 * 56 ~ 46 * 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Remark: (1) *Decreasing linearly with logarithm of the frequency. (2) The lower limit shall apply at the transition frequency. 4.2. Test Setup 4.3. Test Procedure The EUT system is connected to the power mains through a line impedance stabilization network (L.I.S.N.). This provides a 50ohm coupling impedance for the EUT system. Please refer the block diagram of the test setup and photographs. Both sides of AC line are checked to find out the maximum conducted emission. In order to find the maximum emission levels, the relative positions of equipment and all of the interface cables shall be changed according to FCC ANSI C63.10-2013 on Conducted Emission Measurement. The bandwidth of test receiver (ESCI) set at 9kHz. The frequency range from 150kHz to 30MHz is checked. 4.4. Test Data Please to see the following pages. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 12 of 29 Report No.: SZAWW181220002-03 Conducted Emission Test Data Test Site: 1# Shielded Room Operating Condition: CH01 Test Specification: AC 240V, 60Hz for adapter Comment: Live Line Tem.: 22.6℃ Hum.: 42% Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 13 of 29 Report No.: SZAWW181220002-03 Conducted Emission Test Data Test Site: 1# Shielded Room Operating Condition: CH01 Test Specification: AC 240V, 60Hz for adapter Comment: Neutral Line Tem.: 22.6℃ Hum.: 42% Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 14 of 29 Report No.: SZAWW181220002-03 Conducted Emission Test Data Test Site: 1# Shielded Room Operating Condition: CH01 Test Specification: AC 120V, 60Hz for adapter Comment: Live Line Tem.: 22.6℃ Hum.: 42% Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 15 of 29 Report No.: SZAWW181220002-03 Conducted Emission Test Data Test Site: 1# Shielded Room Operating Condition: CH01 Test Specification: AC 120V, 60Hz for adapter Comment: Neutral Line Tem.: 22.6℃ Hum.: 42% Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 16 of 29 Report No.: SZAWW181220002-03 5. Radiation Spurious Emission 5.1. Test Standard and Limit Test Standard FCC Part15 C Section 15.209 and 15.205 Frequency Field strength Limit Measurement Remark (MHz) (microvolt/meter) (dBuV/m) distance (m) 0.009MHz~0.490MHz 2400/F(kHz) - - 300 0.490MHz-1.705MHz 24000/F(kHz) - - 30 1.705MHz-30MHz 30 - - 30 Test Limit 30MHz~88MHz 100 40.0 Quasi-peak 3 88MHz~216MHz 150 43.5 Quasi-peak 3 216MHz~960MHz 200 46.0 Quasi-peak 3 960MHz~1000MHz 500 54.0 Quasi-peak 3 500 54.0 Average 3 Above 1000MHz - 74.0 Peak 3 Remark: (1)The lower limit shall apply at the transition frequency. (2) 15.35(b), Unless otherwise specified, the limit on peak radio frequency emissions is 20dB above the maximum permitted average emission limit applicable to the equipment under test. This peak limit applies to the total peak emission level radiated by the device. 5.2. Test Setup Figure 1. Below 30MHz Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 17 of 29 Report No.: SZAWW181220002-03 Figure 2. 30MHz to 1GHz Figure 3. Above 1 GHz 5.3. Test Procedure For below 1GHz: The EUT is placed on a turntable, which is 0.8m above the ground plane. For above 1GHz: The EUT is placed on a turntable, which is 1.5m above the ground plane. The turn table can rotate 360 degrees to determine the position of the maximum emission level. The EUT is set 3 meters away from the receiving antenna which is mounted on a antenna tower. The antenna can be moved up and down from 1 to 4 meters to find out the maximum emission level. Rotated the EUT through three orthogonal axes to determine the maximum emissions, both horizontal and vertical polarization of the antenna are set on test. The EUT is tested in 9*6*6 Chamber. The device is evaluated in xyz orientation. For the radiated emission test above 1GHz: Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 18 of 29 Report No.: SZAWW181220002-03 aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane. For 9kHz to 150kHz, Set the spectrum analyzer as: RBW = 200Hz, VBW =1kHz, Detector= Quasi-Peak, Trace mode= Max hold, Sweep- auto couple. For 150kHz to 30MHz, Set the spectrum analyzer as: RBW = 9KHz, VBW =30kHz, Detector= Quasi-Peak, Trace mode= Max hold, Sweep- auto couple. For 30MHz to 1000MHz, Set the spectrum analyzer as: RBW = 100kHz, VBW =300kHz,Detector= Quasi-Peak, Trace mode= Max hold, Sweep- auto couple. For above 1GHz,Set the spectrum analyzer as: RBW =1MHz, VBW =1MHz, Detector= Peak, Trace mode= Max hold, Sweep- auto couple. RBW =1MHz, VBW =10Hz, Detector= Average, Trace mode= Max hold, Sweep- auto couple. 5.4. Test Data PASS only the worst case is recorded in the report. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 19 of 29 Report No.: SZAWW181220002-03 Field Strength within the band of operation Result at 3m Limitation Converted 3m Freq.(MHz) Ant. Orientation Margin dB (dBuV/m) dist. (dBuV/m) 13.110 Front 57.68 80.5 -22.82 13.410 Front 62.15 80.5 -18.35 13.553 Front 73.96 90.5 -16.54 13.560 Front 85.63 124 -38.37 13.567 Front 63.57 90.5 -26.93 13.710 Front 62.42 80.5 -18.08 14.010 Front 56.31 80.5 -24.19 -- -- -- -- -- 13.110 Side 54.22 80.5 -26.28 13.410 Side 59.99 80.5 -20.51 13.553 Side 70.64 90.5 -19.86 13.560 Side 85.73 124 -38.27 13.567 Side 66.08 90.5 -24.42 13.710 Side 54.33 80.5 -26.17 14.010 Side 63.37 80.5 -17.13 -- -- -- -- -- Remark： (1) Spectrum Setting: 150 K Hz – 30 MHz, RBW= 9 KHz, VBW=9 KHz, Sweep time = 200 ms. (2) The Log-Bicon Antenna will use to test frequency range from 30MHz to 1000MHz and the Loop Antenna will use to test frequency below 30MHz. (3) If the peak scan value lower limit more than 20dB, then this signal data does not show in table. (4) Only the worst case (x orientation). Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 20 of 29 Report No.: SZAWW181220002-03 Field strength outside of the band of operationTest Job No.: SZAWW181220002-03 Temp.(℃)/Hum.(%RH): 21.4℃/56%RH Standard: FCC PART 15C Power Source: AC 120V, 60Hz for adapter Test Mode: Mode 1 Polarization: Horizontal Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 21 of 29 Report No.: SZAWW181220002-03 Test Results (30~1000MHz) Job No.: SZAWW181220002-03 Temp.(℃)/Hum.(%RH): 21.4℃/56%RH Standard: FCC PART 15C Power Source: AC 120V, 60Hz for adapter Test Mode: Mode 1 Polarization: Vertical Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 22 of 29 Report No.: SZAWW181220002-03 6. Frequency Tolerance 6.1. Test Standard and Limit The frequency tolerance of the carrier signal shall be maintained within ±0.01% of the operating frequency. Fundamental Frequency (MHz) Limit of Tolerance Bandwidth (Hz) 13.56 13.56*1000*1000*0.01%=1356 6.2. Test Setup 6.3. Test Procedure Let the EUT works on temperature variation of −20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 6.4. Test Data Test Item : Frequency tolerance Test Mode : CH 01 Test Voltage : AC 120V, 60Hz for adapter Temperature : See Below Test Result : PASS Humidity : 50%RH Test Condition Temperature Test Result Limit Voltage (V) (℃) (Hz) (Hz) -20 21 1356 Normal AC 120V +20 10 1356 Condition +50 29 1356 Extreme AC 108V +20 30 1356 Condition AC 132V +20 18 1356 Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Anbotek Product Safety Agilent Spectrum Analyzer— Swept SA OJReJsoe_____ : ALIGNAUTO 10:49:56 PM Jan 04, 2019 Marker 1 13.561000000 MHz . Aug Type: Log—Pwr reace ul PNO: Wide GJ Trig: Free Run Aug|Hold:>100/100 WOs M IFGain:Low #Atten: 40 dB bet Ref 30.00 dBm Center 13.5600 MHz Span 500.0 kHz #Res BW 10 kHz #VBW 10 kHz Sweep 6.067 ms (1001 pts) MsG fis‘rflus

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 24 of 29 Report No.: SZAWW181220002-03 7. 20dB Bandwidth 7.1. Test Standard and Limit According to 15.215 (c): Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. 7.2. Test Setup 7.3. Test Procedure The bandwidth of the fundamental frequency was measured by spectrum analyzer with 30kHz RBW and 100kHz VBW. The 20dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 20dB. 7.4. Test Data Test Item : Power Spectral Density Test Mode : CH 01 Test Voltage : AC 120V, 60Hz for adapter Temperature : 23.5℃ Test Result : PASS Humidity : 50%RH Frequency(MHz) 20dB BW(kHz) 13.56 386.2 Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Anbotek Product Safety Agilent Spectrum Analyzer— Occupied BW soe _ac ______ : ALIGNAUTO 10:49:34 PM Jan04, 2019 Center Freq 13.560000 MHz Center Freq: 13.560000 MHz Radio Std: None c Trig: Free Run Aug|Hold:> 10710 #IEGain:Low *~—— datten: 40 dB Radio Device: BTS Ref 30.00 dBm Span 3 MHz #VBW 100 kHz Sweep 3.2 ms Occupied Bandwidth Total Power 20.2 dBm 856.84 kHz Transmit Freq Error 209.00 kHz OBW Power 99.00 % x dB Bandwidth 386.2 kHz x dB —20.00 dB

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 26 of 29 Report No.: SZAWW181220002-03 8. Antenna Requirement 8.1. Test Standard and Requirement Test Standard FCC Part15 Section 15.203 The EUT’S antenna should met the requirement of FCC part 15C section 15.203. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. Antenna requirement must meet at least one of the following: Requirement 1) Antenna must be permanently attached to device. 2) The antenna must use a unique type of connector to attach to the device. 3) Device must be professionally installed. The installer shall be responsible for ensuring that the correct antenna is employed by the device. 8.2. Antenna Connected Construction The antenna is a PCB Antenna which permanently attached, and the best case gain of the antenna is 0 dBi. It complies with the standard requirement. NFC Antenna Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 27 of 29 Report No.: SZAWW181220002-03 APPENDIX I -- TEST SETUP PHOTOGRAPH Please refer to the test report SZAWW181220002-01. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 28 of 29 Report No.: SZAWW181220002-03 APPENDIX II -- EXTERNAL PHOTOGRAPH Please refer to the test report SZAWW181220002-01. Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a

Shenzhen Anbotek Compliance Laboratory Limited FCC ID: 2APSE-SIREN Page 29 of 29 Report No.: SZAWW181220002-03 APPENDIX III -- INTERNAL PHOTOGRAPH Please refer to the test report SZAWW181220002-01. ---------------- End of Report ---------------- Shenzhen Anbotek Compliance Laboratory Limited Tel:(86)755-26066440 Fax:(86)755-26014772 www.anbotek.com Code:AB-RF-05-a


Document Created: 2019-07-05 20:38:07
Document Modified: 2019-07-05 20:38:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC