RF Exposure

FCC ID: 2APMD-PA136A

RF Exposure Info

Download: PDF
FCCID_4131436

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG181219003-00 FCC §1.1310, §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range Electric Field Magnetic Field Power Density Averaging Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According with KDB 680106 D01 RF Exposure Wireless Charging Apps v03 clause 3 c) According to 680106 D01 RF Exposure Wireless Charging App v03 clause 5 b) Page 8 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG181219003-00 Block Diagram of Test Setup 15cm Note: 20 cm for Top test. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Narda Exposure Level Tester ELT-400 N-0229 2017-11-15 2019-11-15 ELT Probe Narda B Field Probe M-0666 2017-11-15 2019-11-15 100cm2 Amplifier Isotropic Field Probe FP5000 301825 2018-11-22 2021-11-22 Research * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 24 oC Relative Humidity: 40 % ATM Pressure: 100.2 kPa * The testing was performed by Neil Liao on 2018-12-27. Test mode: Transmitting Page 9 of 23

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG181219003-00 H-field Strength Frequency Position Position Position Position Position 50% Limit Range A B C D E Limit Test (kHz) (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) 110-205 0.190 0.191 0.196 0.189 0.190 0.815 1.63 Note: Test with 15cm distance from the center of the probe(s) to the edge of the device, 20 cm for top test. E-field Strength Frequency Position Position Position Position Position 50% Limit Range A B C D E Limit Test (kHz) (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) 110-205 4.136 4.23 4.05 4.215 2.983 307 614 Note: Test with 15cm distance from the center of the probe(s) to the edge of the device, 20 cm for top test. Result: Compliance Considerations of compliance 680106 D01 RF Exposure Wireless Charging App v03 clause 5 b: (1) Power transfer frequency is less than 1 MHz. Yes, the operation frequency is 110-205 kHz. (2) Output power from each primary coil is less than or equal to 15 watts. Yes, the maximum output power of primary coil is 10 Watts, less than 15 watts. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. The transfer system includes only single primary coils to detect and allow coupling only between individual pairs of coils. (4) Client device is placed directly in contact with the transmitter. Yes, client device is placed directly in contact with the transmitter (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes, mobile exposure conditions only (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yes, the test result for H and E-field strength less than 50% of the MPE limit. Page 10 of 23


Document Created: 2019-03-29 06:36:00
Document Modified: 2019-03-29 06:36:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC