RF Exposure Report

FCC ID: 2APLE18300394

RF Exposure Info

Download: PDF
FCCID_4069056

RF Exposure Report Report No.: SA180830E03 FCC ID: 2APLE18300394 Test Model: VMB5000 Received Date: Sep. 04, 2018 Test Date: Sep. 28, 2018 Issued Date: Nov. 01, 2018 Applicant: Arlo Technologies, Inc. Address: 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA180830E03 Page No. 1 / 7 Report Format Version: 6.1.1 Reference No.: 180830E03

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 6 2.5 Calculation Result ............................................................................................................................... 7 Report No.: SA180830E03 Page No. 2 / 7 Report Format Version: 6.1.1 Reference No.: 180830E03

Release Control Record Issue No. Description Date Issued SA180830E03 Original release. Nov. 01, 2018 Report No.: SA180830E03 Page No. 3 / 7 Report Format Version: 6.1.1 Reference No.: 180830E03

1 Certificate of Conformity Product: Alro Gen5 Entry Hub Brand: Arlo Test Model: VMB5000 Sample Status: ENGINEERING SAMPLE Applicant: Arlo Technologies, Inc. Test Date: Sep. 28, 2018 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Nov. 01, 2018 Phoenix Huang / Specialist Approved by : , Date: Nov. 01, 2018 May Chen / Manager Report No.: SA180830E03 Page No. 4 / 7 Report Format Version: 6.1.1 Reference No.: 180830E03

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 2 1.34-30 824/f 2.19/f (180/f )* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula 2 Pd = (Pout*G) / (4*pi*r ) where 2 Pd = power density in mW/cm Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA180830E03 Page No. 5 / 7 Report Format Version: 6.1.1 Reference No.: 180830E03

2.4 Antenna Gain Sub-GHz Ant Antenna Gain Frequency rang Antenna Connector Brand Model No. (dBi) (MHz) type type 1 NA 902P00214N0 1.5 860~930 PIFA NA Z-Wave Ant Antenna Gain Frequency rang Antenna Connector Brand Model No. (dBi) (MHz) type type 1 NA 902P00213N0 2.5 860~930 PIFA NA Zigbee Antenna Ant Frequency rang Antenna Connector Brand Model Gain No. (GHz) type type (dBi) INPAQ TECHNOLOGY CO., 1 ACA-5036-A2-CC-S 3.5 2.4~2.4835 CHIP NA LTD. WLAN Antenna Net Frequency Ant Connector Cable Length Brand Model Gain rang Antenna type No. type (mm) (dBi) (GHz) 2.5 2.4~2.4835 1.8 5.15~5.25 1 NA 9 07X01052X0 2 5.25~5.35 Dipole i-pex 75 2.2 5.47~5.725 1.6 5.725~5.85 2.5 2.4~2.4835 2.2 5.15~5.25 2 NA 9 07X00747X19 1.2 5.25~5.35 Dipole i-pex 90 3.2 5.47~5.725 3.5 5.725~5.85 Report No.: SA180830E03 Page No. 6 / 7 Report Format Version: 6.1.1 Reference No.: 180830E03

2.5 Calculation Result For Zigbee: The Maximum power was refer to the FCC test report (Report No.: RF180830E02A-3) For Z-Wave: The Maximum power was refer to the FCC test report (Report No.: RF180830E02A-4) For Sub-GHz: The Maximum power was refer to the FCC test report (Report No.: RF180830E02A-5) Evaluation Operation Max Power Antenna Gain Distance Power Density Limit Frequency 2 2 Mode (mW) (dBi) (cm) (mW/cm ) (mW/cm ) (MHz) WLAN 2.4GHz 2437 508.821 5.51 20 0.35999 1 WLAN U-NII-1 5200 571.179 5.01 20 0.36016 1 WLAN U-NII-3 5745 490.624 5.61 20 0.35520 1 Zigbee 2405 90.991 3.5 20 0.04053 1 Sub-GHz 915 92.89 1.5 20 0.02610 0.61 Note: 2.4GHz: The directional gain = 2.5dBi + 10log(2) = 5.51dBi 5GHz: Chain1/20 Chain2/20 2 For U-NII-1 band: The directional gain = 10 log[(10 + 10 ) / 2] = 5.01dBi Chain1/20 Chain2/20 2 For U-NII-3 band: The directional gain = 10 log[(10 + 10 ) / 2] = 5.61dBi Z-Wave Field Strength Conversion: Field Strength Frequency EIRP EIRP Distance Power Density Limit of Fundamental 2 2 (MHz) (dBm) (mW) (cm) (mW/cm ) (mW/cm ) (dBuV/m) @3m 908.4 93.9 -1.33 0.7362 20 0.00015 0.6056 Note: 1. Pout EIRP (dBm) = Field Strength of Fundamental (dBuV/m) - 95.23 (dB) 2. Power Density Limit = F/1500 Conclusion: The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4GHz + WLAN 5GHz + Zigbee + Sub-GHz + Z-Wave = 0.35999 / 1 + 0.36016 / 1 + 0.04053 / 1 + 0.02610 / 0.61 + 0.00015 / 0.6056 = 0.80371 Therefore the maximum calculations of above situations are less than the “1” limit. --- END --- Report No.: SA180830E03 Page No. 7 / 7 Report Format Version: 6.1.1 Reference No.: 180830E03


Document Created: 2019-04-16 08:23:42
Document Modified: 2019-04-16 08:23:42
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC