RF Test Report-WiFi

FCC ID: 2APLE18300394

Test Report

Download: PDF
FCCID_4069052

FCC Test Report (WLAN) Report No.: RF180830E03 FCC ID: 2APLE18300394 Test Model: VMB5000 Received Date: Sep. 04, 2018 Test Date: Sep. 27 to Oct. 13, 2018 Issued Date: Nov. 01, 2018 Applicant: Arlo Technologies, Inc. Address: 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180830E03 Page No. 1 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (WLAN) .................................................................................................. 7 3.2 Description of Test Modes ................................................................................................................. 10 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................ 11 3.3 Duty Cycle of Test Signal .................................................................................................................. 13 3.4 Description of Support Units ............................................................................................................. 14 3.4.1 Configuration of System under Test .................................................................................................. 15 3.5 General Description of Applied Standards ........................................................................................ 16 4 Test Types and Results ...................................................................................................................... 17 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 17 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 17 4.1.2 Test Instruments ................................................................................................................................ 18 4.1.3 Test Procedures ................................................................................................................................. 19 4.1.4 Deviation from Test Standard ............................................................................................................ 19 4.1.5 Test Setup .......................................................................................................................................... 20 4.1.6 EUT Operating Conditions................................................................................................................. 21 4.1.7 Test Results ....................................................................................................................................... 22 4.2 Conducted Emission Measurement .................................................................................................. 36 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 36 4.2.2 Test Instruments ................................................................................................................................ 36 4.2.3 Test Procedures ................................................................................................................................. 37 4.2.4 Deviation from Test Standard ............................................................................................................ 37 4.2.5 Test Setup .......................................................................................................................................... 37 4.2.6 EUT Operating Conditions................................................................................................................. 37 4.2.7 Test Results ....................................................................................................................................... 38 4.3 6dB Bandwidth Measurement ........................................................................................................... 40 4.3.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 40 4.3.2 Test Setup .......................................................................................................................................... 40 4.3.3 Test Instruments ................................................................................................................................ 40 4.3.4 Test Procedure .................................................................................................................................. 40 4.3.5 Deviation from Test Standard ............................................................................................................ 40 4.3.6 EUT Operating Conditions................................................................................................................. 40 4.3.7 Test Result ......................................................................................................................................... 41 4.4 Conducted Output Power Measurement ........................................................................................... 43 4.4.1 Limits of Conducted Output Power Measurement ............................................................................ 43 4.4.2 Test Setup .......................................................................................................................................... 43 4.4.3 Test Instruments ................................................................................................................................ 43 4.4.4 Test Procedures ................................................................................................................................. 43 4.4.5 Deviation from Test Standard ............................................................................................................ 43 4.4.6 EUT Operating Conditions................................................................................................................. 43 4.4.7 Test Results ....................................................................................................................................... 44 4.5 Power Spectral Density Measurement .............................................................................................. 45 4.5.1 Limits of Power Spectral Density Measurement ............................................................................... 45 4.5.2 Test Setup .......................................................................................................................................... 45 4.5.3 Test Instruments ................................................................................................................................ 45 4.5.4 Test Procedure .................................................................................................................................. 45 4.5.5 Deviation from Test Standard ............................................................................................................ 46 4.5.6 EUT Operating Condition .................................................................................................................. 46 Report No.: RF180830E03 Page No. 2 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.5.7 Test Results ....................................................................................................................................... 47 4.6 Conducted Out of Band Emission Measurement .............................................................................. 50 4.6.1 Limits of Conducted Out of Band Emission Measurement................................................................ 50 4.6.2 Test Setup .......................................................................................................................................... 50 4.6.3 Test Instruments ................................................................................................................................ 50 4.6.4 Test Procedure .................................................................................................................................. 50 4.6.5 Deviation from Test Standard ............................................................................................................ 50 4.6.6 EUT Operating Condition .................................................................................................................. 50 4.6.7 Test Results ....................................................................................................................................... 50 5 Pictures of Test Arrangements .......................................................................................................... 59 Appendix – Information on the Testing Laboratories ................................................................................ 60 Report No.: RF180830E03 Page No. 3 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Release Control Record Issue No. Description Date Issued RF180830E03 Original release. Nov. 01, 2018 Report No.: RF180830E03 Page No. 4 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

1 Certificate of Conformity Product: Alro Gen5 Entry Hub Brand: Arlo Test Model: VMB5000 Sample Status: ENGINEERING SAMPLE Applicant: Arlo Technologies, Inc. Test Date: Sep. 27 to Oct. 13, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Nov. 01, 2018 Phoenix Huang / Specialist Approved by : , Date: Nov. 01, 2018 May Chen / Manager Report No.: RF180830E03 Page No. 5 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Eooert venitas 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission PASS Minimum passing margin is —12.20dB at 0.47031MHz. Meet the requirement of limit. 15.205 / . feal Minimum passing margin is —0.10B at Radiated Emissions and Band Edge 15.209 / ‘ M:aasl,urement 9 PASS 2390.00MHz, 2483.50MHz, 15.247(d) 2486.80MHz, 2490.00MHz, 4824.00MHz and 4874.00MHz. 15.247(d) Antenna Port Emission PASS Meet the requirement of limit. 15.247(a)(2) 6dB bandwidth PASS Meet the requirement of limit. 15.247(b) Conducted power PASS Meet the requirement of limit. 15.247(e) Power Spectral Density PASS Meet the requirement of limit. . Antenna connector is i—pex not a 15.203 Antenna Requirement PASS standard connecior. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Measurement Frequency EXpand(ESQl)Jr(]f? rlainty Conducted Emissions at mains ports 150kHz ~ 3O0MHz 1.84 dB Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.53 dB 1GHz ~ 6GHz 5.08 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 4.98 dB 18GHz ~ 40GHz 5.19 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180830E03 Page No. 6 / 60 Report Format Version: 6.1.1

Eooert venitas 3 General Information 3.1 General Description of EUT (WLAN) Product Alro Gen§ Entry Hub Brand Arlo Test Model VMB5000 Status of EUT ENGINEERING SAMPLE Power Supply Rating 12Vde from power adapter CCK, DQPSK, DBPSK for DSSS Modulation Type 64QAM, 16QAM, QPSK, BPSK for OFDM 256QAM for OFDM in 11ac mode only Modulation Technology DSSS, OFDM 802.11b: up to 11Mbps 802.11a/g: up to 54Mbps Transfer Rate 802.11n: up to 300Mbps 802.11ac: up to 866.7Mbps 24GHz: 2.412 ~ 2. 462GHz Operating Frequency 5GHz: 5.18~ 5.24GHz, 5.745 ~ 5.825GHz 2 4GHz: 802.11b, 802.11g, 802.11n (HT20): 11 802.11n (HT4O): 7 Number of Channel 5GHz: 802.11a, 802.11n (HT20), 802. 11 ac (VHT20): 9 802.11n (HT40), 802. 11ac (VHT40): 4 802.11ac (VHT80): 2 2412 ~ 2.462GHz: 508.821mW Output Power 5.18 ~ 5.24GHz: 571.179mW 5.745 ~ 5.825GHz: 490.624mW Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device Adapter x1 Data Cable Supplied NA Note: 1. There are WLAN, Z—Wave, Zighee and Sub—GHz technology used for the EUT. The EUT has below radios as following table: Radio 1 Radio 2 Radio 3 Radio 4 WLAN (2.4GHz+5GHz band) Z—Wave Zigbee Sub—GHz 2. Simultaneously transmission condition. Condition Technology 1 WLAN 2.4GHz | WLAN 5GHz Z—Wave Zighee Sub—GHz Note: The emission of the simultaneous operation has been evaluated and no non—compliance was found. Report No.: RF180830E03 Page No. 7/ 60 Report Format Version: 6.1.1

3. The EUT must be supplied with a power adapter and following different models could be chosen as following table: No. Brand Model No. P/N No. Spec. Input: 100-120Vac, 0.56A, 50/60Hz 1 NETGEAR AD2076F10 332-10993-01 Output: 12Vdc, 1.5A DC output cable (Unshielded, 1.8m) Input: 100-240Vac, 1.0A, 50/60Hz 2 NETGEAR AD2067M20 332-11074-01 Output: 12Vdc, 2.5A DC output cable (Unshielded, 1.8m) Input: 100-120Vac, 0.6A, 50/60Hz 3 NETGEAR 2ABB018F 1 NJ 332-10927-01 Output: 12Vdc, 1.5A DC output cable (Unshielded, 1.8m) Input: 100-240Vac, 1.0A, 50/60Hz 4 NETGEAR P030WM120B 332-10345-02 Output: 12Vdc, 2.5A DC output cable (Unshielded, 1.8m) Note: From the above models, the worst radiated emission and AC power conducted emission test was found in Adapter 2. Therefore only the test data of the modes were recorded in this report. 4. The antennas provided to the EUT, please refer to the following table: Sub-GHz Ant Antenna Gain Frequency rang Antenna Connector Brand Model No. (dBi) (MHz) type type 1 NA 902P00214N0 1.5 860~930 PIFA NA Z-Wave Ant Antenna Gain Frequency rang Antenna Connector Brand Model No. (dBi) (MHz) type type 1 NA 902P00213N0 2.5 860~930 PIFA NA Zigbee Antenna Ant Frequency rang Antenna Connector Brand Model Gain No. (GHz) type type (dBi) INPAQ TECHNOLOGY CO., 1 ACA-5036-A2-CC-S 3.5 2.4~2.4835 CHIP NA LTD. WLAN Antenna Net Frequency Ant Connector Cable Length Brand Model Gain rang Antenna type No. type (mm) (dBi) (GHz) 2.5 2.4~2.4835 1.8 5.15~5.25 1 NA 9 07X01052X0 2 5.25~5.35 Dipole i-pex 75 2.2 5.47~5.725 1.6 5.725~5.85 2.5 2.4~2.4835 2.2 5.15~5.25 2 NA 9 07X00747X19 1.2 5.25~5.35 Dipole i-pex 90 3.2 5.47~5.725 3.5 5.725~5.85 Report No.: RF180830E03 Page No. 8 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

5. The EUT incorporates a MIMO function. 2.4GHz Band MODULATION MODE DATA RATE (MCS) TX & RX CONFIGURATION 802.11b 1 ~ 11Mbps 2TX 2RX 802.11g 6 ~ 54Mbps 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT20) MCS 8~15 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT40) MCS 8~15 2TX 2RX 5GHz Band MODULATION MODE DATA RATE (MCS) TX & RX CONFIGURATION 802.11a 6 ~ 54Mbps 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT20) MCS 8~15 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT40) MCS 8~15 2TX 2RX MCS0~8 Nss=1 2TX 2RX 802.11ac (VHT20) MCS0~8 Nss=2 2TX 2RX MCS0~9 Nss=1 2TX 2RX 802.11ac (VHT40) MCS0~9 Nss=2 2TX 2RX MCS0~9 Nss=1 2TX 2RX 802.11ac (VHT80) MCS0~9 Nss=2 2TX 2RX 6. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF180830E03 Page No. 9 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

3.2 Description of Test Modes 11 channels are provided for 802.11b, 802.11g and 802.11n (HT20): Channel Frequency (MHz) Channel Frequency (MHz) 1 2412 7 2442 2 2417 8 2447 3 2422 9 2452 4 2427 10 2457 5 2432 11 2462 6 2437 7 channels are provided for 802.11n (HT40): Channel Frequency (MHz) Channel Frequency (MHz) 3 2422 7 2442 4 2427 8 2447 5 2432 9 2452 6 2437 Report No.: RF180830E03 Page No. 10 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC APCM - √ √ √ √ - RE1G: Radiated Emission above 1GHz & Where RE<1G: Radiated Emission below 1GHz Bandedge Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11b 1 to 11 1, 6, 11 DSSS DBPSK 1 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6 802.11n (HT20) 1 to 11 1, 6, 11 OFDM BPSK 6.5 802.11n (HT40) 3 to 9 3, 6, 9 OFDM BPSK 13.5 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11g 1 to 11 6 OFDM BPSK 6 Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11g 1 to 11 6 OFDM BPSK 6 Report No.: RF180830E03 Page No. 11 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11b 1 to 11 1, 6, 11 DSSS DBPSK 1 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6 802.11n (HT20) 1 to 11 1, 6, 11 OFDM BPSK 6.5 802.11n (HT40) 3 to 9 3, 6, 9 OFDM BPSK 13.5 Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE1G 24deg. C, 63%RH 120Vac, 60Hz Rey Chen RE<1G 23deg. C, 68%RH 120Vac, 60Hz Andy Ho PLC 25deg. C, 75%RH 120Vac, 60Hz Andy Ho APCM 25deg. C, 60%RH 120Vac, 60Hz Anderson Chen Report No.: RF180830E03 Page No. 12 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

3.3 Duty Cycle of Test Signal If duty cycle of test signal is ≥ 98 %, duty factor is not required. If duty cycle of test signal is < 98%, duty factor shall be considered. 802.11b: Duty cycle = 12.262 ms/12.356 ms = 0.992 802.11g: Duty cycle = 2.027 ms/2.128 ms = 0.953, Duty factor = 10 * log (1/Duty cycle) = 0.21 802.11n (HT20): Duty cycle = 4.958 ms/5.043 ms = 0.983 802.11n (HT40): Duty cycle = 2.405 ms/2.498 ms = 0.963, Duty factor = 10 * log (1/Duty cycle) = 0.16 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) Report No.: RF180830E03 Page No. 13 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Eooert venitas 34 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. ECC ID Remarks A. McroSD Card SanDisk 8GB NA NA Provided by Lab B. Laptop DELL E6420 B92T3R1 FCC DeC Provided by Lab Note: 1. All power cords of the above support units are non—shielded (1.8m). Shieldin ID Descriptions Qiy. Length (m) (Yes/Nog); Cores (Qty.) Remarks 1. DC Cable 1 1.8 No 0 Supplied by client 2. RJ—45 Cable 1 10 No 0 Provided by Lab Report No.: RF180830E03 Page No. 14 / 60 Report Format Version: 6.1.1

3.4.1 Configuration of System under Test Report No.: RF180830E03 Page No. 15 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05 KDB 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF180830E03 Page No. 16 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 30dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF180830E03 Page No. 17 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY50010156 July 12, 2018 July 11, 2019 Agilent Pre-Amplifier EMC001340 980142 Feb. 09, 2018 Feb. 08, 2019 EMCI Loop Antenna(*) EM-6879 264 Dec. 16, 2016 Dec. 15, 2018 Electro-Metrics RF Cable NA LOOPCAB-001 Jan. 15, 2018 Jan. 14, 2019 RF Cable NA LOOPCAB-002 Jan. 15, 2018 Jan. 14, 2019 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-05 May 05, 2018 May 04, 2019 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-361 Nov. 29, 2017 Nov. 28, 2018 SCHWARZBECK RF Cable 8D 966-3-1 Mar. 20, 2018 Mar. 19, 2019 RF Cable 8D 966-3-2 Mar. 20, 2018 Mar. 19, 2019 RF Cable 8D 966-3-3 Mar. 20, 2018 Mar. 19, 2019 Fixed attenuator UNAT-5+ PAD-3m-3-01 Sep. 27, 2018 Sep. 26, 2019 Mini-Circuits Horn_Antenna BBHA9120-D 9120D-406 Dec. 12, 2017 Dec. 11, 2018 SCHWARZBECK Pre-Amplifier EMC12630SE 980384 Jan. 29, 2018 Jan. 28, 2019 EMCI RF Cable EMC104-SM-SM-1200 160922 Jan. 29, 2018 Jan. 28, 2019 RF Cable EMC104-SM-SM-2000 150317 Jan. 29, 2018 Jan. 28, 2019 RF Cable EMC104-SM-SM-5000 150322 Jan. 29, 2018 Jan. 28, 2019 Spectrum Analyzer N9030A MY54490679 July 23, 2018 July 22, 2019 Keysight Pre-Amplifier EMC184045SE 980386 Jan. 29, 2018 Jan. 28, 2019 EMCI Horn_Antenna BBHA 9170 BBHA9170608 Dec. 14, 2017 Dec. 13, 2018 SCHWARZBECK RF Cable EMC102-KM-KM-1200 160924 Jan. 29, 2018 Jan. 28, 2019 Software ADT_Radiated_V8.7.08 NA NA NA Antenna Tower & Turn Table MF-7802 MF780208406 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA Spectrum Analyzer FSV40 100964 June 20, 2018 June 19, 2019 R&S Power meter ML2495A 1014008 May 09, 2018 May 08, 2019 Anritsu Power sensor MA2411B 0917122 May 09, 2018 May 08, 2019 Anritsu Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 3. 4. The CANADA Site Registration No. is 20331-1 5. Loop antenna was used for all emissions below 30 MHz. 6. Tested Date: Sep. 27 to Oct. 13, 2018 Report No.: RF180830E03 Page No. 18 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detects function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF180830E03 Page No. 19 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF180830E03 Page No. 20 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Connected the EUT with the Laptop which is placed on remote site. b. Controlling software (QDART-Connectivity100040.exe) has been activated to set the EUT on specific status. Report No.: RF180830E03 Page No. 21 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Eooert venitas 4.1.7 Test Results Above 1GHz Data : 802.11b CHANNEL TX Channel 1 DETECTOR Peak (PK) FREQUENCY RANGE |1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW |CORRECTION NO. F':E?' LEVEL d:MV';rm MA:;EN ueigHt ANGLE VALUE FACTOR ( ) (dBuV/m) (dBu ) (dB) (m) (Degree) (dBuV) (dB/m) 1 2390.00 55.8 PK 74.0 18.2 217 H 353 58.5 2.7 2 2390.00 44.0 AV 54.0 —10.0 217 H 353 46.7 2.7 3 *241200 114.9PK 217 H 353 117.6 2.7 4 *241200 113.4AV 217 H 353 116.1 2.7 5 4824.00 51.9 PK 74.0 22. 2.06 H 11 50.3 1.6 6 4824.00 49.6 AV 54.0 44 2.06 H 11 48.0 1.6 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW |CORRECTION NO. '(:;53 LEVEL (dléll':nvl;rm) M’(\::;IN HEIGHT ANGLE VALUE FACTOR (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 58.2 PK 74.0 15.8 3.09 V 297 60.9 2.7 2 2390.00 45.3 AV 54.0 —8.7 3.09 V 297 48.0 2.7 3 *241200 115.3 PK 3.09 V 297 118.0 2.7 4 *21200 113.9AV 3.09 V 297 116.6 2.7 5 4824.00 55.0 PK 74.0 —19.0 3.26 V 262 53.4 1.6 6 4824.00 53.9 AV 54.0 —0.1 3.26 V 262 52.3 1.6 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) — Pre—Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level — Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 22 / 60 Report Format Version: 6.1.1

CHANNEL TX Channel 6 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2437.00 115.8 PK 2.21 H 360 118.8 -3.0 2 *2437.00 114.5 AV 2.21 H 360 117.5 -3.0 3 4874.00 52.3 PK 74.0 -21.7 2.03 H 24 50.7 1.6 4 4874.00 49.6 AV 54.0 -4.4 2.03 H 24 48.0 1.6 5 7311.00 47.4 PK 74.0 -26.6 1.43 H 317 39.7 7.7 6 7311.00 34.8 AV 54.0 -19.2 1.43 H 317 27.1 7.7 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2437.00 116.2 PK 1.62 V 308 119.2 -3.0 2 *2437.00 115.0 AV 1.62 V 308 118.0 -3.0 3 4874.00 55.4 PK 74.0 -18.6 1.47 V 253 53.8 1.6 4 4874.00 53.9 AV 54.0 -0.1 1.47 V 253 52.3 1.6 5 7311.00 47.2 PK 74.0 -26.8 1.54 V 308 39.5 7.7 6 7311.00 35.1 AV 54.0 -18.9 1.54 V 308 27.4 7.7 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 23 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

CHANNEL TX Channel 11 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 118.1 PK 2.21 H 337 121.1 -3.0 2 *2462.00 115.3 AV 2.21 H 337 118.3 -3.0 3 2483.50 47.3 PK 74.0 -26.7 1.42 H 328 50.3 -3.0 4 2483.50 34.4 AV 54.0 -19.6 1.42 H 328 37.4 -3.0 5 2486.80 58.5 PK 74.0 -15.5 2.21 H 337 61.4 -2.9 6 2486.80 52.6 AV 54.0 -1.4 2.21 H 337 55.5 -2.9 7 4924.00 51.1 PK 74.0 -22.9 2.00 H 26 49.4 1.7 8 4924.00 48.6 AV 54.0 -5.4 2.00 H 26 46.9 1.7 9 7386.00 47.0 PK 74.0 -27.0 1.39 H 309 39.1 7.9 10 7386.00 34.7 AV 54.0 -19.3 1.39 H 309 26.8 7.9 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 118.5 PK 1.12 V 121 121.5 -3.0 2 *2462.00 115.8 AV 1.12 V 121 118.8 -3.0 3 2483.50 60.1 PK 74.0 -13.9 1.12 V 121 63.1 -3.0 4 2483.50 52.7 AV 54.0 -1.3 1.12 V 121 55.7 -3.0 5 2486.80 60.9 PK 74.0 -13.1 1.12 V 121 63.8 -2.9 6 2486.80 53.9 AV 54.0 -0.1 1.12 V 121 56.8 -2.9 7 4924.00 54.2 PK 74.0 -19.8 2.45 V 254 52.5 1.7 8 4924.00 52.9 AV 54.0 -1.1 2.45 V 254 51.2 1.7 9 7386.00 47.2 PK 74.0 -26.8 1.49 V 314 39.3 7.9 10 7386.00 35.0 AV 54.0 -19.0 1.49 V 314 27.1 7.9 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 24 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

802.11g CHANNEL TX Channel 1 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 67.0 PK 74.0 -7.0 2.11 H 344 69.7 -2.7 2 2390.00 52.6 AV 54.0 -1.4 2.11 H 344 55.3 -2.7 3 *2412.00 115.5 PK 2.11 H 344 118.2 -2.7 4 *2412.00 105.2 AV 2.11 H 344 107.9 -2.7 5 4824.00 45.4 PK 74.0 -28.6 2.01 H 151 43.8 1.6 6 4824.00 31.0 AV 54.0 -23.0 2.01 H 151 29.4 1.6 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 69.4 PK 74.0 -4.6 1.23 V 158 72.1 -2.7 2 2390.00 53.9 AV 54.0 -0.1 1.23 V 158 56.6 -2.7 3 *2412.00 115.9 PK 1.23 V 158 118.6 -2.7 4 *2412.00 105.7 AV 1.23 V 158 108.4 -2.7 5 4824.00 48.5 PK 74.0 -25.5 1.44 V 279 46.9 1.6 6 4824.00 35.3 AV 54.0 -18.7 1.44 V 279 33.7 1.6 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 25 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

CHANNEL TX Channel 6 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2387.60 58.4 PK 74.0 -15.6 2.12 H 339 61.1 -2.7 2 2387.60 46.0 AV 54.0 -8.0 2.12 H 339 48.7 -2.7 3 2390.00 51.5 PK 74.0 -22.5 2.12 H 339 54.2 -2.7 4 2390.00 45.0 AV 54.0 -9.0 2.12 H 339 47.7 -2.7 5 *2437.00 120.1 PK 2.12 H 339 123.1 -3.0 6 *2437.00 107.9 AV 2.12 H 339 110.9 -3.0 7 2483.50 55.3 PK 74.0 -18.7 2.12 H 339 58.3 -3.0 8 2483.50 46.2 AV 54.0 -7.8 2.12 H 339 49.2 -3.0 9 4874.00 46.5 PK 74.0 -27.5 1.98 H 126 44.9 1.6 10 4874.00 32.0 AV 54.0 -22.0 1.98 H 126 30.4 1.6 11 7311.00 46.7 PK 74.0 -27.3 1.49 H 268 39.0 7.7 12 7311.00 34.5 AV 54.0 -19.5 1.49 H 268 26.8 7.7 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2387.60 60.8 PK 74.0 -13.2 1.59 V 313 63.5 -2.7 2 2387.60 47.3 AV 54.0 -6.7 1.59 V 313 50.0 -2.7 3 2390.00 53.9 PK 74.0 -20.1 1.59 V 313 56.6 -2.7 4 2390.00 46.3 AV 54.0 -7.7 1.59 V 313 49.0 -2.7 5 *2437.00 120.5 PK 1.59 V 313 123.5 -3.0 6 *2437.00 108.4 AV 1.59 V 313 111.4 -3.0 7 2483.50 57.7 PK 74.0 -16.3 1.59 V 313 60.7 -3.0 8 2483.50 47.5 AV 54.0 -6.5 1.59 V 313 50.5 -3.0 9 4874.00 49.6 PK 74.0 -24.4 1.50 V 254 48.0 1.6 10 4874.00 36.3 AV 54.0 -17.7 1.50 V 254 34.7 1.6 11 7311.00 46.9 PK 74.0 -27.1 1.58 V 320 39.2 7.7 12 7311.00 34.8 AV 54.0 -19.2 1.58 V 320 27.1 7.7 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 26 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

CHANNEL TX Channel 11 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 115.1 PK 2.19 H 350 118.1 -3.0 2 *2462.00 104.8 AV 2.19 H 350 107.8 -3.0 3 2483.50 71.3 PK 74.0 -2.7 2.19 H 350 74.3 -3.0 4 2483.50 52.6 AV 54.0 -1.4 2.19 H 350 55.6 -3.0 5 4924.00 44.6 PK 74.0 -29.4 2.04 H 135 42.9 1.7 6 4924.00 30.4 AV 54.0 -23.6 2.04 H 135 28.7 1.7 7 7386.00 46.0 PK 74.0 -28.0 1.49 H 272 38.1 7.9 8 7386.00 34.0 AV 54.0 -20.0 1.49 H 272 26.1 7.9 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 115.5 PK 1.13 V 119 118.5 -3.0 2 *2462.00 105.3 AV 1.13 V 119 108.3 -3.0 3 2483.50 73.7 PK 74.0 -0.3 1.13 V 119 76.7 -3.0 4 2483.50 53.9 AV 54.0 -0.1 1.13 V 119 56.9 -3.0 5 4924.00 47.7 PK 74.0 -26.3 1.48 V 256 46.0 1.7 6 4924.00 34.7 AV 54.0 -19.3 1.48 V 256 33.0 1.7 7 7386.00 46.2 PK 74.0 -27.8 1.64 V 330 38.3 7.9 8 7386.00 34.3 AV 54.0 -19.7 1.64 V 330 26.4 7.9 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 27 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

802.11n (HT20) CHANNEL TX Channel 1 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 66.7 PK 74.0 -7.3 2.16 H 351 69.4 -2.7 2 2390.00 52.5 AV 54.0 -1.5 2.16 H 351 55.2 -2.7 3 *2412.00 116.8 PK 2.16 H 351 119.5 -2.7 4 *2412.00 102.7 AV 2.16 H 351 105.4 -2.7 5 4824.00 45.1 PK 74.0 -28.9 1.97 H 112 43.5 1.6 6 4824.00 31.0 AV 54.0 -23.0 1.97 H 112 29.4 1.6 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 69.1 PK 74.0 -4.9 3.07 V 284 71.8 -2.7 2 2390.00 53.8 AV 54.0 -0.2 3.07 V 284 56.5 -2.7 3 *2412.00 117.2 PK 3.07 V 284 119.9 -2.7 4 *2412.00 103.2 AV 3.07 V 284 105.9 -2.7 5 4824.00 48.2 PK 74.0 -25.8 1.44 V 272 46.6 1.6 6 4824.00 35.3 AV 54.0 -18.7 1.44 V 272 33.7 1.6 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 28 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

CHANNEL TX Channel 6 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2386.50 58.7 PK 74.0 -15.3 2.11 H 355 61.4 -2.7 2 2386.50 45.1 AV 54.0 -8.9 2.11 H 355 47.8 -2.7 3 2390.00 54.2 PK 74.0 -19.8 2.11 H 355 56.9 -2.7 4 2390.00 44.9 AV 54.0 -9.1 2.11 H 355 47.6 -2.7 5 *2437.00 120.6 PK 2.11 H 355 123.6 -3.0 6 *2437.00 108.6 AV 2.11 H 355 111.6 -3.0 7 2483.50 59.1 PK 74.0 -14.9 2.11 H 355 62.1 -3.0 8 2483.50 45.7 AV 54.0 -8.3 2.11 H 355 48.7 -3.0 9 4874.00 46.4 PK 74.0 -27.6 1.96 H 123 44.8 1.6 10 4874.00 32.1 AV 54.0 -21.9 1.96 H 123 30.5 1.6 11 7311.00 46.9 PK 74.0 -27.1 1.48 H 277 39.2 7.7 12 7311.00 34.9 AV 54.0 -19.1 1.48 H 277 27.2 7.7 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2386.50 61.1 PK 74.0 -12.9 1.63 V 328 63.8 -2.7 2 2386.50 46.4 AV 54.0 -7.6 1.63 V 328 49.1 -2.7 3 2390.00 56.6 PK 74.0 -17.4 1.63 V 328 59.3 -2.7 4 2390.00 46.2 AV 54.0 -7.8 1.63 V 328 48.9 -2.7 5 *2437.00 121.0 PK 1.63 V 328 124.0 -3.0 6 *2437.00 109.1 AV 1.63 V 328 112.1 -3.0 7 2483.50 61.5 PK 74.0 -12.5 1.63 V 328 64.5 -3.0 8 2483.50 47.0 AV 54.0 -7.0 1.63 V 328 50.0 -3.0 9 4874.00 49.5 PK 74.0 -24.5 1.49 V 268 47.9 1.6 10 4874.00 36.4 AV 54.0 -17.6 1.49 V 268 34.8 1.6 11 7311.00 47.1 PK 74.0 -26.9 1.63 V 322 39.4 7.7 12 7311.00 35.2 AV 54.0 -18.8 1.63 V 322 27.5 7.7 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 29 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

CHANNEL TX Channel 11 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 115.6 PK 2.22 H 343 118.6 -3.0 2 *2462.00 103.4 AV 2.22 H 343 106.4 -3.0 3 2483.50 71.4 PK 74.0 -2.6 2.22 H 343 74.4 -3.0 4 2483.50 51.3 AV 54.0 -2.7 2.22 H 343 54.3 -3.0 5 4924.00 45.2 PK 74.0 -28.8 1.97 H 124 43.5 1.7 6 4924.00 30.9 AV 54.0 -23.1 1.97 H 124 29.2 1.7 7 7386.00 45.5 PK 74.0 -28.5 1.43 H 267 37.6 7.9 8 7386.00 33.7 AV 54.0 -20.3 1.43 H 267 25.8 7.9 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 116.0 PK 1.87 V 121 119.0 -3.0 2 *2462.00 103.9 AV 1.87 V 121 106.9 -3.0 3 2483.50 73.8 PK 74.0 -0.2 1.87 V 121 76.8 -3.0 4 2483.50 52.6 AV 54.0 -1.4 1.87 V 121 55.6 -3.0 5 4924.00 48.3 PK 74.0 -25.7 1.50 V 267 46.6 1.7 6 4924.00 35.2 AV 54.0 -18.8 1.50 V 267 33.5 1.7 7 7386.00 45.7 PK 74.0 -28.3 1.62 V 317 37.8 7.9 8 7386.00 34.0 AV 54.0 -20.0 1.62 V 317 26.1 7.9 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 30 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

802.11n (HT40) CHANNEL TX Channel 3 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 64.6 PK 74.0 -9.4 2.19 H 339 67.3 -2.7 2 2390.00 52.6 AV 54.0 -1.4 2.19 H 339 55.3 -2.7 3 *2422.00 109.5 PK 2.19 H 339 112.4 -2.9 4 *2422.00 99.6 AV 2.19 H 339 102.5 -2.9 5 4844.00 44.9 PK 74.0 -29.1 1.93 H 122 43.3 1.6 6 4844.00 30.6 AV 54.0 -23.4 1.93 H 122 29.0 1.6 7 7266.00 45.2 PK 74.0 -28.8 1.43 H 283 37.4 7.8 8 7266.00 33.4 AV 54.0 -20.6 1.43 H 283 25.6 7.8 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 67.0 PK 74.0 -7.0 1.19 V 142 69.7 -2.7 2 2390.00 53.9 AV 54.0 -0.1 1.19 V 142 56.6 -2.7 3 *2422.00 109.9 PK 1.19 V 142 112.8 -2.9 4 *2422.00 100.1 AV 1.19 V 142 103.0 -2.9 5 4844.00 48.0 PK 74.0 -26.0 1.54 V 265 46.4 1.6 6 4844.00 34.9 AV 54.0 -19.1 1.54 V 265 33.3 1.6 7 7266.00 45.4 PK 74.0 -28.6 1.57 V 331 37.6 7.8 8 7266.00 33.7 AV 54.0 -20.3 1.57 V 331 25.9 7.8 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 31 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

CHANNEL TX Channel 6 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2380.70 62.9 PK 74.0 -11.1 2.11 H 360 65.5 -2.6 2 2380.70 48.6 AV 54.0 -5.4 2.11 H 360 51.2 -2.6 3 2390.00 58.8 PK 74.0 -15.2 2.11 H 360 61.5 -2.7 4 2390.00 47.8 AV 54.0 -6.2 2.11 H 360 50.5 -2.7 5 *2437.00 113.6 PK 2.11 H 360 116.6 -3.0 6 *2437.00 103.6 AV 2.11 H 360 106.6 -3.0 7 2483.50 66.3 PK 74.0 -7.7 2.11 H 360 69.3 -3.0 8 2483.50 52.6 AV 54.0 -1.4 2.11 H 360 55.6 -3.0 9 4874.00 46.4 PK 74.0 -27.6 1.99 H 126 44.8 1.6 10 4874.00 32.1 AV 54.0 -21.9 1.99 H 126 30.5 1.6 11 7311.00 46.7 PK 74.0 -27.3 1.45 H 261 39.0 7.7 12 7311.00 34.9 AV 54.0 -19.1 1.45 H 261 27.2 7.7 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2380.70 65.3 PK 74.0 -8.7 1.68 V 310 67.9 -2.6 2 2380.70 49.9 AV 54.0 -4.1 1.68 V 310 52.5 -2.6 3 2390.00 61.2 PK 74.0 -12.8 1.68 V 310 63.9 -2.7 4 2390.00 49.1 AV 54.0 -4.9 1.68 V 310 51.8 -2.7 5 *2437.00 114.0 PK 1.68 V 310 117.0 -3.0 6 *2437.00 104.1 AV 1.68 V 310 107.1 -3.0 7 2483.50 68.7 PK 74.0 -5.3 1.68 V 310 71.7 -3.0 8 2483.50 53.9 AV 54.0 -0.1 1.68 V 310 56.9 -3.0 9 4874.00 49.5 PK 74.0 -24.5 1.51 V 264 47.9 1.6 10 4874.00 36.4 AV 54.0 -17.6 1.51 V 264 34.8 1.6 11 7311.00 46.9 PK 74.0 -27.1 1.62 V 315 39.2 7.7 12 7311.00 35.2 AV 54.0 -18.8 1.62 V 315 27.5 7.7 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 32 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

CHANNEL TX Channel 9 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2452.00 111.2 PK 2.12 H 339 114.2 -3.0 2 *2452.00 101.1 AV 2.12 H 339 104.1 -3.0 3 2483.50 61.0 PK 74.0 -13.0 2.12 H 339 64.0 -3.0 4 2483.50 46.3 AV 54.0 -7.7 2.12 H 339 49.3 -3.0 5 2490.00 67.9 PK 74.0 -6.1 2.12 H 339 70.8 -2.9 6 2490.00 52.6 AV 54.0 -1.4 2.12 H 339 55.5 -2.9 7 4904.00 45.4 PK 74.0 -28.6 1.98 H 135 43.7 1.7 8 4904.00 31.1 AV 54.0 -22.9 1.98 H 135 29.4 1.7 9 7356.00 45.7 PK 74.0 -28.3 1.45 H 265 37.8 7.9 10 7356.00 33.9 AV 54.0 -20.1 1.45 H 265 26.0 7.9 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2452.00 111.6 PK 1.67 V 302 114.6 -3.0 2 *2452.00 101.6 AV 1.67 V 302 104.6 -3.0 3 2483.50 63.4 PK 74.0 -10.6 1.67 V 302 66.4 -3.0 4 2483.50 47.6 AV 54.0 -6.4 1.67 V 302 50.6 -3.0 5 2490.00 70.3 PK 74.0 -3.7 1.67 V 302 73.2 -2.9 6 2490.00 53.9 AV 54.0 -0.1 1.67 V 302 56.8 -2.9 7 4904.00 48.5 PK 74.0 -25.5 1.55 V 254 46.8 1.7 8 4904.00 35.4 AV 54.0 -18.6 1.55 V 254 33.7 1.7 9 7356.00 45.9 PK 74.0 -28.1 1.57 V 307 38.0 7.9 10 7356.00 34.2 AV 54.0 -19.8 1.57 V 307 26.3 7.9 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180830E03 Page No. 33 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Below 1GHz Data: 802.11g CHANNEL TX Channel 6 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 64.53 29.6 QP 40.0 -10.4 2.50 H 154 38.8 -9.2 2 125.01 34.5 QP 43.5 -9.0 3.00 H 121 43.8 -9.3 3 217.89 32.3 QP 46.0 -13.7 1.50 H 143 43.1 -10.8 4 250.00 36.1 QP 46.0 -9.9 1.00 H 116 45.0 -8.9 5 347.84 27.3 QP 46.0 -18.7 1.50 H 264 33.0 -5.7 6 574.76 30.9 QP 46.0 -15.1 1.50 H 247 31.4 -0.5 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF180830E03 Page No. 34 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

CHANNEL TX Channel 6 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 41.70 33.7 QP 40.0 -6.3 1.00 V 115 41.8 -8.1 2 65.57 34.8 QP 40.0 -5.2 1.00 V 134 44.2 -9.4 3 124.99 37.4 QP 43.5 -6.1 1.00 V 126 46.7 -9.3 4 250.00 33.7 QP 46.0 -12.3 1.50 V 115 42.6 -8.9 5 302.30 28.3 QP 46.0 -17.7 1.00 V 264 35.1 -6.8 6 644.33 32.8 QP 46.0 -13.2 1.50 V 143 31.6 1.2 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF180830E03 Page No. 35 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 847124/029 Nov. 01, 2017 Oct. 31, 2018 R&S Line-Impedance Stabilization Network ESH3-Z5 848773/004 Nov. 15, 2017 Nov. 14, 2018 (for EUT) R&S Line-Impedance Stabilization Network ENV216 100072 June 04, 2018 June 03, 2019 (for Peripheral) R&S 50 ohms Terminator N/A EMC-04 Nov. 01, 2017 Oct. 31, 2018 RF Cable 5D-FB COCCAB-001 Sep. 28, 2018 Sep. 27, 2019 Fixed attenuator STI02-2200-10 003 Mar. 16, 2018 Mar. 15, 2019 EMCI Software BVADT_Cond_ NA NA NA BVADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Conduction 1. 3 Tested Date: Oct. 10, 2018 Report No.: RF180830E03 Page No. 36 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

uces venitas 4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit — 200B) was not recorded. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi—peak detection (QP) and average detection (AV) at frequency 0.15MHz—30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane / Test Receiver sw L___J 0 o o o 40cm EUT E*~~l o a o o 80cm |LISN L1 L1 L \ HN T orizontal Gr ound Refere Plane nce Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF180830E03 Page No. 37 / 60 Report Format Version: 6.1.1

4.2.7 Test Results Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 10.05 42.82 26.28 52.87 36.33 66.00 56.00 -13.13 -19.67 2 0.16953 10.05 38.87 21.35 48.92 31.40 64.98 54.98 -16.06 -23.58 3 0.47422 10.13 28.04 20.80 38.17 30.93 56.44 46.44 -18.27 -15.51 4 0.86875 10.16 15.55 11.63 25.71 21.79 56.00 46.00 -30.29 -24.21 5 7.09766 10.53 23.35 17.59 33.88 28.12 60.00 50.00 -26.12 -21.88 6 11.20313 10.79 17.13 10.13 27.92 20.92 60.00 50.00 -32.08 -29.08 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF180830E03 Page No. 38 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 9.95 43.02 25.88 52.97 35.83 66.00 56.00 -13.03 -20.17 2 0.16562 9.96 38.63 20.05 48.59 30.01 65.18 55.18 -16.59 -25.17 3 0.47031 10.02 28.51 24.29 38.53 34.31 56.51 46.51 -17.98 -12.20 4 0.97813 10.04 5.93 1.57 15.97 11.61 56.00 46.00 -40.03 -34.39 5 6.95703 10.36 19.69 14.41 30.05 24.77 60.00 50.00 -29.95 -25.23 6 17.32422 11.01 7.36 1.93 18.37 12.94 60.00 50.00 -41.63 -37.06 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level – Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF180830E03 Page No. 39 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.3 6dB Bandwidth Measurement 4.3.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 Test Setup Spectrum EUT Attenuator Analyzer 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF180830E03 Page No. 40 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.3.7 Test Result 802.11b Frequency 6dB Bandwidth (MHz) Minimum Limit Channel Pass / Fail (MHz) Chain 0 Chain 1 (MHz) 1 2412 8.08 8.06 0.5 Pass 6 2437 8.11 8.08 0.5 Pass 11 2462 8.12 8.11 0.5 Pass 802.11g Frequency 6dB Bandwidth (MHz) Minimum Limit Channel Pass / Fail (MHz) Chain 0 Chain 1 (MHz) 1 2412 16.40 16.42 0.5 Pass 6 2437 16.37 16.39 0.5 Pass 11 2462 16.37 16.39 0.5 Pass 802.11n (HT20) Frequency 6dB Bandwidth (MHz) Minimum Limit Channel Pass / Fail (MHz) Chain 0 Chain 1 (MHz) 1 2412 17.65 17.64 0.5 Pass 6 2437 17.64 17.65 0.5 Pass 11 2462 17.65 17.65 0.5 Pass 802.11n (HT40) Frequency 6dB Bandwidth (MHz) Minimum Limit Channel Pass / Fail (MHz) Chain 0 Chain 1 (MHz) 3 2422 35.25 35.33 0.5 Pass 6 2437 35.32 35.43 0.5 Pass 9 2452 34.13 35.48 0.5 Pass Report No.: RF180830E03 Page No. 41 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Spectrum Plot of Worst Value 802.11b_Chain 1 / CH1 802.11g_Chain 0 / CH6 802.11n (HT20)_Chain 0 / CH6 802.11n (HT40)_Chain 0 / CH9 Report No.: RF180830E03 Page No. 42 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.4 Conducted Output Power Measurement 4.4.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) Per KDB 662911 D01 Multiple Transmitter Output Method of conducted output power measurement on IEEE 802.11 devices, Array Gain = 0 dB (i.e., no array gain) for NANT ≤ 4; Array Gain = 0 dB (i.e., no array gain) for channel widths ≥ 40 MHz for any NANT; Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT ≥ 5. For power measurements on all other devices: Array Gain = 10 log(N ANT/NSS) dB. 4.4.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedures Average power sensor was used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst. Duty factor is not added to measured value. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Conditions Same as Item 4.3.6. Report No.: RF180830E03 Page No. 43 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.4.7 Test Results 802.11b Average Power (dBm) Total Chan. Freq. Total Power Chan. Power Limit (dBm) Pass / Fail (MHz) Chain 0 Chain 1 (dBm) (mW) 1 2412 21.39 21.36 274.494 24.39 30 Pass 6 2437 23.14 23.25 417.412 26.21 30 Pass 11 2462 23.96 23.93 496.058 26.96 30 Pass 802.11g Average Power (dBm) Total Chan. Freq. Total Power Chan. Power Limit (dBm) Pass / Fail (MHz) Chain 0 Chain 1 (dBm) (mW) 1 2412 18.34 18.44 138.057 21.40 30 Pass 6 2437 24.00 24.11 508.821 27.07 30 Pass 11 2462 18.76 18.69 149.123 21.74 30 Pass 802.11n (HT20) Average Power (dBm) Total Chan. Freq. Total Power Chan. Power Limit (dBm) Pass / Fail (MHz) Chain 0 Chain 1 (dBm) (mW) 1 2412 17.38 17.40 109.656 20.40 30 Pass 6 2437 24.01 24.07 507.038 27.05 30 Pass 11 2462 18.71 18.76 149.464 21.75 30 Pass 802.11n (HT40) Average Power (dBm) Total Chan. Freq. Total Power Chan. Power Limit (dBm) Pass / Fail (MHz) Chain 0 Chain 1 (dBm) (mW) 3 2422 16.11 16.15 82.042 19.14 30 Pass 6 2437 20.09 20.21 207.048 23.16 30 Pass 9 2452 16.61 17.01 96.048 19.82 30 Pass Report No.: RF180830E03 Page No. 44 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.5 Power Spectral Density Measurement 4.5.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm in any 3 kHz. 4.5.2 Test Setup Spectrum EUT Attenuator Analyzer 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure For 802.11b, 802.11n (HT20) a. Set instrument center frequency to DTS channel center frequency. b. Set span to at least 1.5 times the OBW. c. Set RBW to: 3 kHz ≤ RBW ≤ 100 kHz. . d. Set VBW ≥3 x RBW. e. Detector = power averaging (RMS) or sample detector (when RMS not available). f. Ensure that the number of measurement points in the sweep ≥ 2 x span/RBW. g. Sweep time = auto couple. h. Employ trace averaging (RMS) mode over a minimum of 100 traces. i. Use the peak marker function to determine the maximum amplitude level. For 802.11g, 802.11n (HT40) a. Measure the duty cycle (x). b. Set instrument center frequency to DTS channel center frequency. c. Set span to at least 1.5 times the OBW. d. Set RBW to: 3 kHz ≤ RBW ≤ 100 kHz.. e. Set VBW ≥3 x RBW. f. Detector = power averaging (RMS) or sample detector (when RMS not available). g. Ensure that the number of measurement points in the sweep ≥ 2 x span/RBW. h. Sweep time = auto couple. i. Do not use sweep triggering. Allow sweep to “free run”. j. Employ trace averaging (RMS) mode over a minimum of 100 traces. k. Use the peak marker function to determine the maximum amplitude level. l. Add 10 log (1/x), where x is the duty cycle measured in step (a, to the measured PSD to compute the average PSD during the actual transmission time. Report No.: RF180830E03 Page No. 45 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as Item 4.3.6 Report No.: RF180830E03 Page No. 46 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.5.7 Test Results 802.11b TX Freq. PSD 10 log (N=2) Total PSD Limit Pass Channel chain (MHz) (dBm/3kHz) dB (dBm/3kHz) (dBm/3kHz) /Fail 1 2412 -8.95 3.01 -5.94 8 Pass 0 6 2437 -7.08 3.01 -4.07 8 Pass 11 2462 -6.58 3.01 -3.57 8 Pass 1 2412 -8.88 3.01 -5.87 8 Pass 1 6 2437 -6.94 3.01 -3.93 8 Pass 11 2462 -6.22 3.01 -3.21 8 Pass Note: 1. The directional gain = 2.5dBi + 10log(2) = 5.51dBi < 6dBi, so the power density limit shall not be reduced. 802.11g Total PSD PSD W/O Duty Duty Freq. 10 log With Duty Limit Pass TX chain Channel Factor Factor (MHz) (N=2) dB Factor (dBm/3kHz) /Fail (dBm/3kHz) (dB) (dBm/3kHz) 1 2412 -14.05 3.01 0.21 -10.83 8 Pass 0 6 2437 -8.51 3.01 0.21 -5.29 8 Pass 11 2462 -14.31 3.01 0.21 -11.09 8 Pass 1 2412 -14.27 3.01 0.21 -11.05 8 Pass 1 6 2437 -8.60 3.01 0.21 -5.38 8 Pass 11 2462 -13.71 3.01 0.21 -10.49 8 Pass Note: 1. The directional gain = 2.5dBi + 10log(2) = 5.51dBi < 6dBi, so the power density limit shall not be reduced. 2. Refer to section 3.3 for duty cycle spectrum plot. Report No.: RF180830E03 Page No. 47 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

802.11n (HT20) Freq. PSD 10 log (N=2) Total PSD Limit Pass TX chain Channel (MHz) (dBm/3kHz) dB (dBm/3kHz) (dBm/3kHz) /Fail 1 2412 -14.72 3.01 -11.71 8 Pass 0 6 2437 -8.81 3.01 -5.80 8 Pass 11 2462 -13.51 3.01 -10.50 8 Pass 1 2412 -14.95 3.01 -11.94 8 Pass 1 6 2437 -8.40 3.01 -5.39 8 Pass 11 2462 -13.79 3.01 -10.78 8 Pass Note: 1. The directional gain = 2.5dBi + 10log(2) = 5.51dBi < 6dBi, so the power density limit shall not be reduced. 802.11n (HT40) Total PSD PSD W/O Duty Duty Freq. 10 log With Duty Limit Pass TX chain Channel Factor Factor (MHz) (N=2) dB Factor (dBm/3kHz) /Fail (dBm/3kHz) (dB) (dBm/3kHz) 3 2422 -19.21 3.01 0.16 -16.04 8 Pass 0 6 2437 -14.94 3.01 0.16 -11.77 8 Pass 9 2452 -14.72 3.01 0.16 -11.55 8 Pass 3 2422 -19.37 3.01 0.16 -16.20 8 Pass 1 6 2437 -14.42 3.01 0.16 -11.25 8 Pass 9 2452 -17.71 3.01 0.16 -14.54 8 Pass Note: 1. The directional gain = 2.5dBi + 10log(2) = 5.51dBi < 6dBi, so the power density limit shall not be reduced. 2. Refer to section 3.3 for duty cycle spectrum plot. Report No.: RF180830E03 Page No. 48 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Spectrum Plot of Worst Value 802.11b_Chain 1 / CH11 802.11g_Chain 0 / CH6 802.11n (HT20)_Chain 1 / CH6 802.11n (HT40)_Chain 1 / CH6 Report No.: RF180830E03 Page No. 49 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

4.6 Conducted Out of Band Emission Measurement 4.6.1 Limits of Conducted Out of Band Emission Measurement Below 30dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.6.2 Test Setup Spectrum EUT Attenuator Analyzer 4.6.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.6.4 Test Procedure MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.6.5 Deviation from Test Standard No deviation. 4.6.6 EUT Operating Condition Same as Item 4.3.6 4.6.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 30dB offset below D1. It shows compliance with the requirement. Report No.: RF180830E03 Page No. 50 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

802.11b Maximum REF Chain 0 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF180830E03 Page No. 51 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Chain 1 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF180830E03 Page No. 52 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

802.11g Maximum REF Chain 0 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF180830E03 Page No. 53 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Chain 1 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF180830E03 Page No. 54 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

802.11n (HT20) Maximum REF Chain 0 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF180830E03 Page No. 55 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Chain 1 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF180830E03 Page No. 56 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

802.11n (HT40) Maximum REF Chain 0 CH 3 CH 6 CH 9 CH 3 Band edge CH 9 Band edge Report No.: RF180830E03 Page No. 57 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Chain 1 CH 3 CH 6 CH 9 CH 3 Band edge CH 9 Band edge Report No.: RF180830E03 Page No. 58 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180830E03 Page No. 59 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linkou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180830E03 Page No. 60 / 60 Report Format Version: 6.1.1 Reference No.: 180830E03


Document Created: 2019-03-21 16:24:23
Document Modified: 2019-03-21 16:24:23
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC