RF Exposure

FCC ID: 2APKZ-BT800E

RF Exposure Info

Download: PDF
FCCID_3864795

GTS FCC ID: 2APKZ—BT800E RF Exposure Evaluation According to KDB 447498 and part 2.1093. Unless specifically required by the published RF exposure KDB procedures, standalone 1—g head or body and 10—9 extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances s 50 mm, the 1—g and 10—g SAR test exclusion thresholds are determined by the following: [{max. power of channel, including tune—up tolerance, mW) / (min. test separation distance, mm)] > [Vf(GHZ)] < 3.0 for 1—g SAR, and s 7.5 for 10—g extremity SAR, where fiang is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, For BT Max Power(dBm) Max Power(mW) Frequency(MHz) Min. distance({mm) Cale. thresholds limit 0.26 1.062 2480 5 0.334 3.0 For BT—LE Max Power(dBm) Max Power(mW) Frequency(MHz) Min. distance({mm) Cale. thresholds limit —1.26 0.748 2480 5 0.236 3.0 So a SAR test is not required


Document Created: 2018-05-17 08:36:54
Document Modified: 2018-05-17 08:36:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC