RF Exposure

FCC ID: 2APJZ-TW181113

RF Exposure Info

Download: PDF
FCCID_4302906

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ190111811-00B FCC §15.247 (i) & §1.1307 (b) (1) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart 15.247 (i) and subpart 1.1307 (b)(1), 2.1091 systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of the communication guidelines. Limits for General Population/Uncontrolled Exposure Limits for General Population/Uncontrolled Exposure Frequency Electric Field Magnetic Field Power Averaging Range Strength Strength Density Time (MHz) (V/m) (A/m) (mW/cm2) (Minutes) 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Result Calculated Formulary: Predication of MPE limit at a given distance PG S= 4R 2 S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW). G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) Antenna Gain Tune-up Power Evaluation Power Frequency MPE Limit Distance Density (MHz) (dBi) (numeric) (dBm) (mW) (mW/cm2) (cm) (mW/cm2) 2412 2 1.58 23 200 20 0.063 1 Note: To maintain compliance with the FCC’s RF exposure guidelines, place the equipment at least 20cm from nearby persons. Result: Compliance FCC Part 15.247 Page 13 of 49


Document Created: 2019-06-01 12:56:56
Document Modified: 2019-06-01 12:56:56
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC