Manual

FCC ID: 2APC5-WAVE1205

Users Manual

Download: PDF
FCCID_4187976

Product Specifications Install your Wave12 Phone Placement for Wireless Charging Introducing HPB Wave12  Detection distance: 5~10 cm (from cover glass) Wave12(1205/1210)  Detection angle: 42 degrees (from center of sensor) 1.Locate the 2. Match the “T” User Manual   BLE connection distance: Max. 6m Power Input micro USB: “T” shaped end of the clip shape end with the opening on Side arms Side arms Motion sensor and Wave1205 DC5V 1.7A; Position the center of the the back of the LED indicators Wave1210 DC9V 2.1A mount phone with the wireless Hand Gesture Controller Bluetooth indicator (suggest use cigarette lighter receptacle with USB Type A charging sensor of the Bluetooth Connection & Wireless Charging connector) Wave12. Lock the phone in  Cradle size (W/H/D): 129.1mm/105.8mm/74.4mm; 3. Slide the 4. Fix the position by adjusting the side Wireless charging Adjustable width: Min. 66.3mm, Max. 91.5mm; arms and bottom hook. clip in until an Wave12 on a Version 1.0 indicator Adjustable height:18.6mm; audible click is suitable location  Wireless Charging Power: heard Wave 1205 : Output Power - 5W Bottom hook Wave 1210 : Output Power - 10W  Blue Tooth Frequency : 2.4GHz Light Indication Guide  Range of Working Temperature 0~40°C 5. Connect the cable to the micro USB input located on the back of the Wave12 The light indications are shown on the motion sensor panel on the  Caution : The rated output current of power adapter shall be left of the Wave12 device. as below Car air vent clip Wave 1205:5V/1.7A Wave 1210:9V/2.1A Bluetooth indicator (off): No phone connected Bluetooth indicator (on): Phone is connected Micro USB input Package Contents  HPB Wave12  Micro USB cable Green battery indicator (on): Standby mode Vertical  User manual  Car air vent clip 6. Plug into the car using USB outlet or via a cigarette lighter with USB Type A Red battery indicator (on): Phone charging adjustment tab Red battery indicator (blinking): Obstruction & Disclaimer connector Over current The function to hang up phone by using hand gestures is not (Cigarette lighter is not standard compatible with iPhone. accessory) Vertical Adjustment Guide For iPhone (No APP is needed) For Android Phone (Please download APP “HPB WAVE” before using) The vertical adjustment tab is located on the back of the *Support iOS 10.0 and above *Support Android 6.0 and above Wave12. Gently push on the tab to slide the vertical Car Audio Routing Setting Bluetooth Pairing Install APP & Related Settings Bluetooth Pairing adjustment up and down. Once the desired position is found, To set up your phone, go to 1. Go to Settings of your iPhone and turn on Bluetooth. iOS Scan the QR code below or go to your "Play Store" for Start hpb wave APP. Click on "Connection Setting" to release the tab to set the position. There are 7 different SettingsGeneralAccessibilityCall Audio Routing, select system will scan devices automatically. At "Other "HPB Wave" APP installation. search for available device "Wave12-xxxx" and select it. adjustable positions (drawing as below). "Bluetooth Headset". devices" you may find several Bluetooth devices, select 1. Upon completion, click "Yes" to turn on Bluetooth. "Wave12-xxxx". 2. In the "SettingsSound & NotificationNotification 2. System will pop out a pair request dialog box and access", select "hpb wave". choose "Pair". Wave12 will be paired and connected. 3. In the "SettingsAccessibility", turn hpb wave to "ON". Blue LED will be on. Slide towards G for smaller phone sizes 3. Please double check the Bluetooth, "Wave12-xxxx" is connected in your "My Devices" list. Vertical Adjustment Tab Slide towards A for larger phone size More functions on hpb wave App:  Unpair: To remove the device, click "unpair". Attention  Search Connection: Click to search available device nearby. If yes, you will see "Wave12-xxxx is connected!". This device is designed to work with your Smart phone  Audio Output: There are options for your choice. and Bluetooth car stereo or Bluetooth speakers. "Mobile Phone": audio out from your mobile phone Please check the connection before use. The function "Mobile Speakerphone (voice only)": audio out from your mobile to hang up phone using hand gestures is not For Android user : if you connected or used several phone speaker compatible with iPhone. Bluetooth speakers, you must choose one of them。 "Other devices": It will go to phone system to allow you to 00connect your target BT devices. Operation instructions Operation instructions Operation instructions Hereby，HPB HI-TECH CORP. declares that the radio equipment type [Wave 12 designation of type of RE] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of Warranty Card Wave hand in front of the motion sensor from position 1 to 2 Wave hand in front of the motion sensor from position 1 to 2 Wave hand in front of the motion sensor from position 1 to conformity is available at the following internet address: 10F., No.308 Sec. 1, Neihu Rd, Taipei, Taiwan, R.O.C. 0.5~1 second within 0.5~1 second 2 within 0.5~1 second This Limited Warranty is certified that HPB HI-TECH CORP. is guaranteed for free repairs up to 12 months from the date of purchase against assembly / Federal Communication Commission Interference Statement manufacturing faults. Wave Up Wave Down This equipment has been tested and found to comply with the limits for a Class B digital This warranty does not cover defects resulting from improper or unreasonable 5-10 cm device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable use or maintenance; failure to follow operating instructions; accident; excess Answer phone call Hang Up or 0.5~1 sec protection against harmful interference in a residential installation. This equipment generates, moisture; insects; lightning; power surges; connections to improper voltage Play / Pause music Deny phone call uses, and can radiate radio frequency energy and, if not installed and used in accordance with supply; unauthorized alteration or modification of original condition; damages Wave Right Clockwise the instructions, may cause harmful interference to radio communications. However, there is caused by inadequate packing or shipping procedures; loss of, damage t or corruption of stored data; product that requires modification or adaptation to Next Song Volume Up no guarantee that interference will not occur in a particular installation. If this equipment does enable it to operate in any country other than the country for which it was cause harmful interference to radio or television reception, which can be determined by turning designed, manufactured, approved and/or authorized, or repair of products the equipment off and on, the user is encouraged to try to correct the interference by one or damaged by these modifications; and products purchased from unauthorized more of the following measures: dealers. • Reorient or relocate the receiving antenna. This warranty period id effective from 30 days after manufacture month if the 0.5~1 sec • Increase the separation between the equipment and receiver. warranty card is illegible, removed, altered or damaged. • Connect the equipment into an outlet on a circuit different from that to which the receiver is HPB or HPB authorized distributor will provide quotation to consumer first for any connected. service demand exceed warranty period. Service demand will conduct after 0.5~1 sec • Consult the dealer or an experienced radio/TV technician for help. received consumer agreement. 5-10 cm 0.5~1 sec FCC Caution: Seal: Date of Purchase: 0.5~1 sec This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must Counter accept any interference received, including interference that may cause undesired operation. Wave Left Clockwise Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Previous Volume Down FCC Radiation Exposure Statement: Song This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Maintenance & Service 0.5~1 sec H.P.B. Hi-Tech Corp. 10F., No.308 Sec. 1, Neihu Rd, Taipei, Taiwan, R.O.C. Tel: 886-2-26581566 Customer Service Hotline: 886-2-26581566 Email: service@hpbhitech.com

HPB Wave12 產品介紹 無線充電時的電話放置 Wave12(1205/1210) 產品規格  最佳偵測距離 : 5~10 公分 (從產品面板起算) 安裝您的 Wave12  偵測角度 : 42 度 (從感應器中心起算) 使用手冊 手勢感應 LED 指示   藍芽範圍 : 最大 6 公尺 電源輸入 micro USB： 1. 找出夾子 的「T」形末 2. 將「T」形 末端對準固定 側臂 側臂 將手機中心對準 Wave12 的 端 座背面的開口 無線充電感應器。調整側臂和 Wave1205 DC5V 1.7A; 藍芽手勢控制器 燈 Wave1210 DC9V 2.1A 底鉤，將手機放入定位。 藍芽指示燈 （建議使用具有 USB Type A 接頭的點菸器插座） 藍芽手勢控制+無線充電  托架尺寸（寬／高／深）：129.1mm/105.8mm/74.4mm; 4. 將 Wave12 版本 1.0 無線充電指示燈 可調寬度： 最小 66.3mm，最大 91.5mm; 3. 將夾子滑 固定於合適 可調高度：18.6mm; 入，直到聽 的位置  無線充電功率： 到咔嗒聲 Wave1205 - 5W; 底鉤 Wave1210 - 10W  藍芽使用頻率: 2.4GHz  工作溫度範圍 : 0~40°C 燈光指示指南  注意：電源適配器的額定輸出電流應如下所示 Wave 1205:5V/1.7A Wave 1210:9V/2.1A 5. 將線連接至位於 Wave12 背面的 燈光指示顯示在 Wave12 裝置左側的動作感應器面板上。 micro USB 輸入 空調出風夾具 包裝內含 藍牙指示燈（熄滅）： 未與手機連線  HPB Wave12  使用手冊 藍牙指示燈（亮起）： 已與手機連線 Micro USB 插槽  Micro USB 線  空調出風夾具 6. 使用 USB 插座或透過具有 USB 垂直調整卡榫 Type A 接頭的點菸器插座插入車輛 綠色電池指示燈（亮起）： 待機模式 免責聲明 （點菸器並非標準配件） 紅色電池指示燈（亮起）： 手機正在充電 紅色電池指示燈（閃爍）： 阻礙和過電流 iPhone 不支援手勢掛斷電話。 垂直調整指南 iOS 系統手機設定 (不需使用 APP) 安卓系統手機設定(使用前請先下載”HPB WAVE ”APP) 垂直調整卡榫位於 Wave12 的背面。輕推卡榫 上下滑動 即可 *支援 iOS 10.0 及以上版本 *支援 Android 6.0 及以上版本 進行垂直調整。找到所需位置後，放開卡榫以設定位置。 來電語音設定 iPhone 手機與 Wave12 藍芽配對方式 下載 APP 與相關權限設定 安卓手機與 Wave12 藍芽配對方式 有 7 個不同的調整位置可供設定（如下圖所示）。 從手機中點選「設定一般輔助使用來電語音傳送」 ，點 1. 從手機「設定」，開啟藍芽功能。iOS 系統會自動掃描， 1. 掃描下面左圖的條碼產生器或從手機的「Play 商店」中搜 開啟 hpb wave 程式，點選「連線設定」 ，搜尋並點選 選「藍芽耳麥」。 在「其他裝置」中，會找到藍芽裝置，點選「Wave12- 尋並安裝「HPB Wave」應用程式。 "Wave12-xxxx"。 xxxx」。 2. 程式安裝完成，點選「是」開啟藍芽。 2. 系統會跳出對話框，要求開啟，點選「配對」。Wave12 3. 在「設定音效與通知通知存取權」，點選「hpb wave」。 將會配對並連線。藍色 LED 燈會開啟。 4. 從「設定協助工具」 ，將 hpb wave「打開」。 若手機尺寸較小，則朝 G 滑動 3. 請務必確認在「我的裝置」中「Wave12-xxxx」連線，藍 芽開啟。 垂直調整卡榫 若手機尺寸較大，則朝 A 滑動 注意 hpb wave 程式其他設定  解除配對：按下進入畫面，點選裝置將它移除。 本產品需搭配手機與藍芽車用音響、藍芽喇叭裝置  搜尋連線裝置：按下即開始搜尋藍芽裝置。 使用，請先確認手機與車用音響與藍芽喇叭/耳機已  音源輸出：可選擇以下設定使用語音輸出方式 連線完成。iPhone 不支援手勢掛斷電話。 "手機"：語音輸出為原始手機音源輸出。 "手機擴音"：語音輸出為手機擴音輸出。 "其他裝置"：進入手機設定系統，可自行設定音源輸出。 一般設備(低功率電波輻射性電機管理辦法第 12、14 條) 手勢操作介紹 手勢操作介紹 手勢操作介紹 --- 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅 產品保證卡 自變更頻率，加大功率或變更原設計之特性及功能。 在 0.5-1 秒之間.揮動你的手從位置 1 到位置 2 在 0.5-1 秒之間.揮動你的手從位置 1 到位置 2 在 0.5-1 秒之間.揮動你的手從位置 1 到位置 2 產品保證相關事項： --- 低功率射頻電機之使用不得影響飛航安全及干擾合法通信：經發現有干擾現象  自購買日起 12 個月內在正常使用狀態下發生故障時，由本公司免費維修。 時，應立即停用，並改善至無干擾時方得繼續使用。 上揮 下揮 前項合法通信，指依電信法規定作業之無線電通信低功率射頻電機需忍受合法通信 (電池始於消耗品不在保固內。) 5-10 公分  如有下列情形之一者，雖在保固期間內恕不提供免費維修。 接聽來電 掛斷或拒絕來電 或工業、科學及醫療用電波輻射性電機設備之干擾。 0.5~1 秒 1. 由於天災地變或人為疏失所導致故障或損害。 播放/暫停音樂 2. 由於電源規格不符，使用不當，導致故障或損害。 順時鐘旋轉 3. 自行拆解改裝商品，或非本公司服務人員檢修所引起之故障或損害。 右揮  本保證書如有記載不實，空白，損毀，遺失，塗改致字跡無法辨識或經銷 調大音量 商未確認者，以製造日期一個月後起計算保證期間。 下一首歌曲  自購買日起超過 12 個月保固期間後之服務，將先經由公司判斷原因後，提 供維修報價給客戶，經客戶確認同意後始維修。  使用前請詳閱此說明書，未按說明方法使用，導致機器故障或造成重大事 0.5~1 秒 故，本公司恕不保證，並不負法律責任。 0.5~1 秒 經銷商店章： 購買日期： 0.5~1 秒 5-10 公分 0.5~1 秒 逆時鐘旋轉 左揮 調小音量 產品維修與客戶服務 上一首歌曲 合錦光電科技股份有限公司 台灣台北市內湖路一段 308 號 10 樓 電話: 886-2-26581566 0.5~1 秒 客服專線: 886-2-26581566 電郵: service@hpbhitech.com


Document Created: 2019-01-26 14:24:49
Document Modified: 2019-01-26 14:24:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC