Test_Report_BLE_2APB4-FTS20CW_

FCC ID: 2APB4-FTS20CW

Test Report

Download: PDF
FCCID_3871571

Shenzhen Toby Technology Co., Ltd. Report No.: TB-FCC159719 Page: 1 of 28 FCC Radio Test Report FCC ID: 2APB4-FTS20CW FCC Class II Permissive Change Report No. : TB-FCC159719 Applicant : Cooper Lighting, LLC Equipment Under Test (EUT) EUT Name : LED FIXED LUMINAIRE Model No. : FTS20CW Serial Model No. : FTS20CB Brand Name : N/A Receipt Date : 2018-05-03 Test Date : 2018-05-04 to 2018-05-08 Issue Date : 2018-05-09 Standards : FCC Part 15: 2016, Subpart C(15.247) Test Method : ANSI C63.10: 2013 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above, Test/Witness : Engineer Approved& : Authorized This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. TB-RF-074-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-FCC159719 Page: 2 of 28 Contents CONTENTS............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 4 1.1 Client Information ................................................................................................................. 4 1.2 General Description of EUT (Equipment Under Test) ................................................... 4 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 5 1.4 Description of Support Units .............................................................................................. 5 1.5 Description of Test Mode .................................................................................................... 6 1.6 Description of Test Software Setting ................................................................................ 7 1.7 Measurement Uncertainty .................................................................................................. 7 1.8 Test Facility ........................................................................................................................... 8 2. TEST SUMMARY ....................................................................................................................... 9 3. TEST EQUIPMENT .................................................................................................................. 10 4. CONDUCTED EMISSION TEST ........................................................................................... 11 4.1 Test Standard and Limit .................................................................................................... 11 4.2 Test Setup ........................................................................................................................... 11 4.3 Test Procedure ................................................................................................................... 11 4.4 EUT Operating Mode ........................................................................................................ 12 4.5 Test Da5ta........................................................................................................................... 12 5. RADIATED EMISSION TEST ................................................................................................ 13 5.1 Test Standard and Limit .................................................................................................... 13 5.2 Test Setup ........................................................................................................................... 14 5.3 Test Procedure ................................................................................................................... 15 5.4 EUT Operating Condition ................................................................................................. 16 5.5 Test Data ............................................................................................................................. 16 ATTACHMENT A-- CONDUCTED EMISSION TEST DATA ....................................................... 17 ATTACHMENT B-- RADIATED EMISSION TEST DATA ............................................................ 21 TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 3 of 28 Revision History Report No. Version Description Issued Date TB-FCC159719 Rev.01 Initial issue of report 2018-05-09 TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 4 of 28 1. General Information about EUT 1.1 Client Information Applicant : Cooper Lighting, LLC Address : 1121 Highway 74 South Peachtree City, GA 30269, USA. Manufacturer : Cooper Lighting, LLC Address : 1121 Highway 74 South Peachtree City, GA 30269, USA. 1.2 General Description of EUT (Equipment Under Test) EUT Name : LED FIXED LUMINAIRE Models No. : FTS20CW, FTS20CB Model : All these models are identical in the same PCB, layout and electrical Difference circuit, the only difference is appearance and color. Operation Frequency: Bluetooth 4.2(BLE): 2402MHz~2480MHz Number of Channel: 40 channels see note(3) Product RF Output Power: -1.224dBm Conducted Power : Description Antenna Gain: 2dBi Internal Antenna Modulation Type: GFSK Bit Rate of Transmitter: 1Mbps(GFSK) Power Supply : AC Voltage supplied Power Rating : Input: AC 120~277V, 50/60Hz Software : N/A Version Hardware : N/A Version Connecting : Please refer to the User's Manual I/O Port(S) Note: This Test Report is FCC Part 15.247 for Bluetooth BLE, the test procedure follows the FCC KDB 558074 D01 DTS Means Guidance v04. (1) For a more detailed features description, please refer to the manufacturer’s specifications or the User’s Manual. (2) Antenna information provided by the applicant. TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 5 of 28 (3) Channel List: Frequency Frequency Frequency Channel Channel Channel (MHz) (MHz) (MHz) 00 2402 14 2430 28 2458 01 2404 15 2432 29 2460 02 2406 16 2434 30 2462 03 2408 17 2436 31 2464 04 2410 18 2438 32 2466 05 2412 19 2440 33 2468 06 2414 20 2442 34 2470 07 2416 21 2444 35 2472 08 2418 22 2446 36 2474 09 2420 23 2448 37 2476 10 2422 24 2450 38 2478 11 2424 25 2452 39 2480 12 2426 26 2454 13 2428 27 2456 1.3 Block Diagram Showing the Configuration of System Tested TX Mode AC Voltage supplied EUT Cable 1 1.4 Description of Support Units Equipment Information Name Model FCC ID/VOC Manufacturer Used “√” / / / / / Cable Information Number Shielded Type Ferrite Core Length Note Cable 1 N0 N0 1.2M / TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 6 of 28 1.5 Description of Test Mode To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned follow was evaluated respectively. For Radiated Test Final Test Mode Description Mode 1 TX Mode Mode 2 TX Mode (Channel 00/20/39) Note: (1) For all test, we have verified the construction and function in typical operation. And all the test modes were carried out with the EUT in transmitting operation in maximum power with all kinds of data rate. According to ANSI C63.10 standards, the measurements are performed at the highest, middle, lowest available channels, and the worst case data rate as follows: BLE Mode: GFSK Modulation Transmitting mode. (2) During the testing procedure, the continuously transmitting with the maximum power mode was programmed by the customer. (3) The EUT is considered a portable unit; in normal use it was positioned on X-plane. The worst case was found positioned on X-plane. Therefore only the test data of this X-plane was used for radiated emission measurement test. TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 7 of 28 1.6 Description of Test Software Setting During testing channel& Power controlling software provided by the customer was used to control the operating channel as well as the output power level. The RF output power selection is for the setting of RF output power expected by the customer and is going to be fixed on the firmware of the final end product power parameters of RF setting. Test Software Version 56317_InstalluEnergyTools_2_5_0_108 exe Frequency 2402 MHz 2440MHz 2480 MHz BLE GFSK DEF DEF DEF 1.7 Measurement Uncertainty The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2 ， providing a level of confidence of approximately 95 %. Test Item Parameters Expanded Uncertainty (ULab) Level Accuracy: Conducted Emission 9kHz~150kHz ±3.42 dB 150kHz to 30MHz ±3.42 dB Level Accuracy: Radiated Emission ±4.60 dB 9kHz to 30 MHz Level Accuracy: Radiated Emission ±4.40 dB 30MHz to 1000 MHz Level Accuracy: Radiated Emission ±4.20 dB Above 1000MHz TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 8 of 28 1.8 Test Facility The testing was performed by the Shenzhen Toby Technology Co., Ltd., in their facilities located at:1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, Guangdong, China. At the time of testing, the following bodies accredited the Laboratory: CNAS (L5813) The Laboratory has been accredited by CNAS to ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories for the competence in the field of testing. And the Registration No.: CNAS L5813. A2LA Certificate No.: 4750.01 The laboratory has been accredited by American Association for Laboratory Accreditation(A2LA) to ISO/IEC 17025：2005 General Requirements for the Competence of Testing and Calibration Laboratories for the technical competence in the field of Electrical Testing. And the A2LA Certificate No.: 4750.01. IC Registration No.: (11950A-1) The Laboratory has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing. The site registration: Site# 11950A-1. TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 9 of 28 2. Test Summary FCC Part 15 Subpart C(15.247)/RSS 247 Issue 2 Standard Section Test Item Judgment Remark FCC IC 15.203 Antenna Requirement PASS N/A RSS-GEN 15.207(a) Conducted Emission PASS N/A 7.2.4 Band-Edge & Unwanted RSS-GEN N/A 15.205&15.247(d) Emissions into Restricted PASS 7.2.2 Note(3) Frequency RSS 247 N/A 15.247(a)(2) 6dB Bandwidth PASS 5.2 (1) Note(3) RSS 247 Conducted Max Output N/A 15.247(b)(3) PASS 5.4 (4) Power Note(3) RSS 247 N/A 15.247(e) Power Spectral Density PASS 5.2 (2) Note(3) Transmitter Radiated 15.205, RSS 247 Spurious &Unwanted PASS N/A 15.209&15.247(d) 5.5 Emissions into Restricted Frequency Note: (1): “/” for no requirement for this test item. (2): N/A is an abbreviation for Not Applicable. (3): This report is Class II change report for the original equipment have changed, the transmitter module itself has not changed. More information about the test data please refer to the original test report. TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 10 of 28 3. Test Equipment Conducted Emission Test Cal. Due Equipment Manufacturer Model No. Serial No. Last Cal. Date EMI Test Receiver Rohde & Schwarz ESCI 100321 Jul. 20, 2017 Jul. 19, 2018 Compliance RF Switching Unit Direction Systems RSU-A4 34403 Jul. 20, 2017 Jul. 19, 2018 Inc AMN SCHWARZBECK NNBL 8226-2 8226-2/164 Jul. 20, 2017 Jul. 19, 2018 LISN Rohde & Schwarz ENV216 101131 Jul. 20, 2017 Jul. 19, 2018 Radiation Emission Test Cal. Due Equipment Manufacturer Model No. Serial No. Last Cal. Date Spectrum Agilent E4407B MY45106456 Jul. 20, 2017 Jul. 19, 2018 Analyzer EMI Test Rohde & Schwarz ESPI 100010/007 Jul. 20, 2017 Jul. 19, 2018 Receiver Bilog Antenna ETS-LINDGREN 3142E 00117537 Mar.16, 2018 Mar. 15, 2019 Bilog Antenna ETS-LINDGREN 3142E 00117542 Mar.16, 2018 Mar. 15, 2019 Horn Antenna ETS-LINDGREN 3117 00143207 Mar.16, 2018 Mar. 15, 2019 Horn Antenna ETS-LINDGREN 3117 00143209 Mar.16, 2018 Mar. 15, 2019 Loop Antenna Laplace instrument RF300 0701 Mar.16, 2018 Mar. 15, 2019 Pre-amplifier Sonoma 310N 185903 Mar.16, 2018 Mar. 15, 2019 Pre-amplifier HP 8449B 3008A00849 Mar.16, 2018 Mar. 15, 2019 Cable HUBER+SUHNER 100 SUCOFLEX Mar.16, 2018 Mar. 15, 2019 Positioning Controller ETS-LINDGREN 2090 N/A N/A N/A Antenna Conducted Emission Cal. Due Equipment Manufacturer Model No. Serial No. Last Cal. Date Spectrum Analyzer Agilent E4407B MY45106456 Jul. 20, 2017 Jul. 19, 2018 Spectrum Analyzer Rohde & Schwarz ESCI 100010/007 Jul. 20, 2017 Jul. 19, 2018 MXA Signal Analyzer Agilent N9020A MY49100060 Oct. 26, 2017 Oct. 25, 2018 Vector Signal Agilent N5182A MY50141294 Oct. 26, 2017 Oct. 25, 2018 Generator Analog Signal Agilent N5181A MY50141953 Oct. 26, 2017 Oct. 25, 2018 Generator DARE!! Instruments RadiPowerRPR3006W 17I00015SNO26 Oct. 26, 2017 Oct. 25, 2018 DARE!! Instruments RadiPowerRPR3006W 17I00015SNO29 Oct. 26, 2017 Oct. 25, 2018 RF Power Sensor DARE!! Instruments RadiPowerRPR3006W 17I00015SNO31 Oct. 26, 2017 Oct. 25, 2018 DARE!! Instruments RadiPowerRPR3006W 17I00015SNO33 Oct. 26, 2017 Oct. 25, 2018 TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 11 of 28 4. Conducted Emission Test 4.1 Test Standard and Limit 4.1.1Test Standard FCC Part 15.207 4.1.2 Test Limit Conducted Emission Test Limit Maximum RF Line Voltage (dBV) Frequency Quasi-peak Level Average Level 150kHz~500kHz 66 ~ 56 * 56 ~ 46 * 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Notes: (1) *Decreasing linearly with logarithm of the frequency. (2) The lower limit shall apply at the transition frequencies. (3) The limit decrease in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2 Test Setup 4.3 Test Procedure The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 12 of 28 I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. LISN at least 80 cm from nearest part of EUT chassis. The bandwidth of EMI test receiver is set at 9 kHz, and the test frequency band is from 0.15MHz to 30MHz. 4.4 EUT Operating Mode Please refer to the description of test mode. 4.5 Test Da5ta Please refer to the Attachment A. TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 13 of 28 5. Radiated Emission Test 5.1 Test Standard and Limit 5.1.1 Test Standard FCC Part 15.247(d) 5.1.2 Test Limit Radiated Emission Limits (9kHz~1000MHz) Frequency Field Strength Measurement Distance (MHz (microvolt/meter) (meters) 0.009~0.490 2400/F(KHz) 300 0.490~1.705 24000/F(KHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 Radiated Emission Limit (Above 1000MHz) Distance Meters(at 3m) Frequency (MHz) Peak Average (dBuV/m) (dBuV/m) Above 1000 74 54 Note: (1) The tighter limit applies at the band edges. (2) Emission Level (dBuV/m)=20log Emission Level (uV/m) TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 14 of 28 5.2 Test Setup Below 30MHz Test Setup Below 1000MHz Test Setup TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 15 of 28 Above 1GHz Test Setup 5.3 Test Procedure (1) The measuring distance of 3m shall be used for measurements at frequency up to 1GHz and above 1 GHz. The EUT was placed on a rotating 0.8m high above ground, the table was rotated 360 degrees to determine the position of the highest radiation. (2) Measurements at frequency above 1GHz. The EUT was placed on a rotating 1.5m high above the ground. RF absorbers covered the ground plane with a minimum area of 3.0m by 3.0m between the EUT and measurement receiver antenna. The RF absorber shall not exceed 30cm in high above the conducting floor. The table was rotated 360 degrees to determine the position of the highest radiation. (3) The Test antenna shall vary between 1m and 4m, Both Horizontal and Vertical antenna are set to make measurement. (4) The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured. (5) If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit Bellow 1 GHz, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed. But the Peak Value and average value both need to comply with applicable limit above 1 GHz. (6) Testing frequency range below 1GHz the measuring instrument use VBW=120 kHz with Quasi-peak detection. (7) Testing frequency range above 1GHz the measuring instrument use RBW=1 MHz and VBW=3 MHz with Peak Detector for Peak Values, and use RBW=1 MHz and VBW=10 Hz with Peak Detector for Average Values. (8) For the actual test configuration, please see the test setup photo. TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 16 of 28 5.4 EUT Operating Condition The Equipment Under Test was set to Continual Transmitting in maximum power. 5.5 Test Data Remark: During testing above 1GHz the measuring instrument use RBW=1 MHz and VBW=3 MHz with Peak Detector for Peak Values, and use RBW=1 MHz and VBW=10 Hz with Peak Detector for Average Values. Please refer to the Attachment B. TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 17 of 28 Attachment A-- Conducted Emission Test Data Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 120V/60 Hz Terminal: Line Test Mode: TX GFSK Mode 2402 MHz Remark: Only worse case is reported Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 18 of 28 Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 120V/60 Hz Terminal: Neutral Test Mode: TX GFSK Mode 2402 MHz Remark: Only worse case is reported Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 19 of 28 Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 240V/60 Hz Terminal: Line Test Mode: TX GFSK Mode 2402 MHz Remark: Only worse case is reported Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 20 of 28 Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 240V/60 Hz Terminal: Neutral Test Mode: TX GFSK Mode 2402 MHz Remark: Only worse case is reported Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 21 of 28 Attachment B-- Radiated Emission Test Data 9 KHz~30 MHz From 9 KHz to 30 MHz: Conclusion: PASS Note: The amplitude of spurious emissions which are attenuated by more than 20dB Below the permissible value has no need to be reported. 30MHz~1GHz Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 120V/60HZ Ant. Pol. Horizontal Test Mode: BLE TX 2402 Mode Remark: Only worse case is reported Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 22 of 28 Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 120V/60HZ Ant. Pol. Vertical Test Mode: BLE TX 2402 Mode Remark: Only worse case is reported Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 23 of 28 Above 1GHz Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 120V/60HZ Ant. Pol. Horizontal Test Mode: BLE Mode TX 2402 MHz Remark: No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 24 of 28 Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 120V/60HZ Ant. Pol. Vertical Test Mode: BLE Mode TX 2402 MHz Remark: No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 25 of 28 Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 120V/60HZ Ant. Pol. Horizontal Test Mode: BLE Mode TX 2442 MHz Remark: No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 26 of 28 Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 120V/60HZ Ant. Pol. Vertical Test Mode: BLE Mode TX 2442 MHz Remark: No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 27 of 28 Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 120V/60HZ Ant. Pol. Horizontal Test Mode: BLE Mode TX 2480 MHz Remark: No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor TB-RF-074-1.0

Report No.: TB-FCC159719 Page: 28 of 28 Temperature: 25℃ Relative Humidity: 55% Test Voltage: AC 120V/60HZ Ant. Pol. Vertical Test Mode: BLE Mode TX 2480 MHz Remark: No report for the emission which more than 10 dB below the prescribed limit. Emission Level= Read Level+ Correct Factor -----END OF REPORT------ TB-RF-074-1.0


Document Created: 2018-05-30 09:17:47
Document Modified: 2018-05-30 09:17:47
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC