Modular Approval Letter

FCC ID: 2AP8V-SMK900

Cover Letter(s)

Download: PDF
FCCID_4171061

                                     Smartrek Technologies inc.
                                     462 rue Labrecque
                                     Saint-Honoré-de-Shenley, QC, Canada, G0M 1V0
                                     (581) 701-3075

Date: 02/07/2019
TUV SUD BABT TCB
Octagon House,
Segensworth Road,
Fareham,
Hampshire,
PO15 5RL

Modular Approval Request

FCC ID: 2AP8V-SMK900

The following attestation addresses the requirements to support modular approval:

Modular approval requirement                Yes (provide brief statement)           No *
(a) The radio elements must have the         Yes, the rf frontend and all
radio frequency circuitry shielded.           analog parts for the RF
Physical components and tuning                 signals are shielded.
capacitor(s) may be located external to
the shield, but must be on the module
assembly
(b) The module must have buffered           Yes, the data is stored in the
modulation/data inputs to ensure that the          microcontroller
device will comply with Part 15
requirements with any type of input
signal
(c) The module must contain power            Yes, The module uses an
supply regulation on the module              onboard MCP1700-3302
                                                 voltage regulator
(d) The module must contain a                   Yes, unique antenna
permanently attached antenna, or                     connector
contain a unique antenna connector, and
be marketed and operated only with
specific antenna(s), per Sections 15.203,
15.204(b), 15.204(c), 15.212(a), 2.929(b)
(e) The module must demonstrate             Yes, The module is tested in
compliance in a stand-alone                  stand-alone configuration
configuration
(f) The module must be labelled with its                Yes,
permanently affixed FCC ID label, or use
an electronic display (See KDB
Publication 784748 about labelling
requirements)
(g) The module must comply with all            Yes, the radio module
specific rules applicable to the              complies with applicable
transmitter. The grantee must provide           RSS-102 exposure
comprehensive instructions to explain       requirements in its intended
compliance requirements                            configuration


Modular approval requirement                    Yes (provide brief statement)   No *
(h) The module must comply with RF                          Yes
exposure requirements

* Please provide a detailed explanation if the answer is “No.”



Yours sincerely,




Name: Thien-Ly Nguyen-Dang
Title: President



Document Created: 2019-02-07 14:37:28
Document Modified: 2019-02-07 14:37:28

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC