user_manual

FCC ID: 2AP8E-A6121

Users Manual

Download: PDF
FCCID_4033606

54*85mm Note 1. Make sure voltage 1.5V Introduction 2. Correct + / - direction Step 1. Download App Step 3. Adding cylinder in App Step 4. Install cylinder into lock knob cover Thank you for choicing WIMA product, screw 1. Remove the fixing screw of the knob cover at the Download App from App Store or scan QR code below 1. Install the cylinder into the lock and make sure Please read this manual carefully before use. to install Mi App in your mibile rear of the cylinder (See Fig. 1) the cylinder works properly 2. Tap gateway icon to enter gateway page 1. The key must be registed before use, ALL key 3. Tap “Device” on the top line 2. More details of cylinder replacement, please Fig. 1 4. Tap [+] icon to add child device have been registed in manufacture. scan QR code below for reference 5. Tap “Smart Door Lock” icon 2. The key usage is same as classic key, but when beige button 6. Press down beige button on the cylinder until a you insert a right key, you will hear a “beep”, that long beep heard then release the button means unlocked. 7. Click beige button to check if gateway linked to blue button cylinder successful, otherwise repeat above again 3. The cylinder can be linked to Mi App. 8. Restore knob cover (this function depend on Mi sever in your location) Fig. 2 4. Besides the mechanical structure, the product is also equipped with an electronic device inside. any oil / liquids is strictly prohibited put in to cylinder. 5. Please keep the key clean to make sure good Step 2. Link to Mi gateway contact with cylinder. correct direction √ Register your account in Mi App then tap [+] 6. This product contains alkaline batteries, please icon in the upper right corner of main page to stay away from the fire / hot source. start to link Mi gateway User Manual 7. Make sure battery model is LR1 AM5 Size N1.5V Please refer to Mi gateway manual to finish. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions wrong direction  wrong direction  wrong direction  (1) this device may not cause harmful interference,and 8. Please keep at least 1 legal key to unlock It is (2) this device must accept any interference absolutely necessary to open your door. Fig. 3 received, including interference that may cause undesired operation.

54*85mm Local operation Tone manual Parameters Warranty Daily operate manual 1. Within 7 days of reception of the product, the 1. In the cylinder page of the App, all operation 8. A temporary key is a key whose unlocking time The cylinder supports the local add / delete of keys Operation Tone Indication Product: Electro-Mechanical Cylinder product shall returned or exchanged only if it’s not record will be listed. period can be set in the next 24 hours. It will not as well. Please note that ALL key will be deleted in Style: Euro-profile cylinder Insert key 1 beep unlock installed. The condition of the product should not 2. Enter other function page by tap [...]in the upper usable beyond this time period; the temporary key local mode, can not delete 1 key. To proceed with Model: A6121 In key-adding mode, affect resale. right corner of the cylinder main page. can also be restored to be a regular key, and its the local operation, you should first remove the knob successfully recovery setup is the same as described in item 6 cover at the rear of the cylinder. (See Fig. 1) insert the unregistered 1 beep 3. The “Auto” setup process is same as other added Contains: cylinder, 5 key, anti-drill cover, screw 2. Within 15 days after reception of the product, key gateway child devices. key duplication & warranty card, user manual replacement or free maintenance services can be 4. In the “key management” page, you can add 9. Enable / Disable local operation. Through the Note: The mobile allows either the enable or disable Replace battery 1 beep power on Voltage requirement: DC4.5V arranged if there is performance failure. the key by tap the [+] in the upper right corner. setting on App, you can enable/disable the function of local operation through the App. The local operation Click【blue button】 or try to add enter Battery requirement: LR1 AM5 Size N 1.5V Confirm and insert the key according to the prompt of the two buttons on cylinder can only be performed when authorized by the mobile. 2 beeps key-adding Wireless connection: Zigbee 3. Within 12 months of date of reception, free of the App. When you heard a “beep”, pull out the unregistered keys by mode Temperature requirement: - 25 °C ~ + 55 °C maintenance service can be provided for the products key and complete the registration. The key can be 10. Turn on/off the unlocking prompt tone. Through 1. Addition of keys: Click the cylinder 【blue button】 the App Humidity requirement: 5% ~ 93% RH with quality issues. renamed after being added. the setting page in the App, you can turn on/off the to enter the key addition mode (2 beeps); insert the Click【blue button】 quit key-add- 5. In the “key management” page, you can report unlocking prompt tone unregistered key into the cylinder and a sound of again or quit key-add- 3 beeps Maximum number of keys registered: 20 Pcs “beep” indicates that the key is added successfully. ing mode by the App ing mode Product materials: 304 stainless steel, brass, Warranty services will not be provided after the loss of the key by sliding the green button from right to left (the color will turn from green to grey 11. About prompt tone Click the 【blue button】 again to exit the mode or In key-adding mode, refused regis- nickel-silver, ABS 1. Unauthorized maintenance, misuse, collision, accordingly). After the loss is reported, the key a) When the key is inserted into the cylinder, exit automatically after 15 seconds ( 3 beeps). insert registered key beeps …… tered key Packing dimensions: 225 x 155 x 50 mm negligence, misuse and injection, oil inlet, accident, cannot be used to unlock; if you need to recover there will be a prompt tone “beep”, indicating continuing stop illegal Standards: GB16796-2009; Q/ WM001-2016 2. Deletion of keys: (Use this function with caution) All illegal operation modification, incorrect use of non-product parts. the lost key, just slide the gray button back successfully unlock; short beeps operation Suitable for door thickness range: 45-90mm towards the right side. When the color of the b) If an unregistered key is inserted, there will Press and hold the 【blue button】for more than 5 --Alarm mode immediately (depending on the eccentricity of the lockcase) seconds until a long beep can be heard from the 2. The warranty has expired. button changes from gray into green, the key can be an alarm tone from the cylinder; cylinder. Release the button and ALL key in the Press 【blue button】 1 long beep deleted ALL be used to unlock again. c) After unlocking, if the key is not turned within cylinder will be deleted. and hold for 5 seconds registered key 3. Damage caused by force majeure. 6. In the “key management” page, press and hold 5 seconds, it will be determined that the key is forgotten to be removed, and a warning After unlock 6 long beeps low battery, the key (slide the key to the left if you are using tone of 30 seconds will start; 3. The local operation can be synchronized with the replace batte- an IOS system), and a window will pop up d) If the registered key is repeatedly registered, mobile through the "refresh" icon, which can be found ry at once automatically where you can rename, delete, and Service Line：+86 400-887-9017 set the temporary key. there will also be a prompt tone as an indication on the “key management” page of the App. Forgot to remove the 30 beeps reminder-- 7. The difference between loss of key and deletion of failed registration key remove key Manufacture：WIMA Technology (Zhuhai)Co.,Ltd. of key, Loss of key can be restored at any time, but immediately Address：99,University road,Tang jia town,Zhuhai, if the key is deleted, it must be re-registered before Guangdong province, P.R.CHINA being used again

FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help.


Document Created: 2018-10-10 14:48:22
Document Modified: 2018-10-10 14:48:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC