Test Report-Co-located

FCC ID: 2AP7A-AMBER12

Test Report

Download: PDF
FCCID_4083050

FCC Test Report Report No.: RF180619C29-4 FCC ID: 2AP7A-AMBER12 Test Model: AM12 Received Date: Jun. 19, 2018 Test Date: Oct. 18, 2018 Issued Date: Oct. 26, 2018 Applicant: LatticeWork, Inc. Address: 2210 O’Toole Ave, Suite 250, San Jose, CA 95131 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan, R.O.C. FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken o r any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information t hat you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180619C29-4 Page No. 1 / 27 Report Format Version:6.1.2

Table of Contents Release Control Record ........................................................................................................................ 3 1 Certificate of Conformity .................................................................................................................. 4 2 Summary of Test Results ................................................................................................................. 5 2.1 Measurement Uncertainty ............................................................................................................ 5 2.2 Modification Record..................................................................................................................... 5 3 General Information ......................................................................................................................... 6 3.1 General Description of EUT ......................................................................................................... 6 3.2 Description of Test Modes ............................................................................................................ 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................. 10 3.3 Description of Support Units....................................................................................................... 11 3.3.1 Configuration of System under Test................................................................................... 11 3.4 General Description of Applied Standards ................................................................................... 11 4 Test Types and Results .................................................................................................................. 12 4.1 Radiated Emission and Bandedge Measurement ........................................................................ 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement.................................................. 12 4.1.2 Limits of Unwanted Emission Out of the Restricted Bands .................................................. 13 4.1.3 Test Instruments .............................................................................................................. 14 4.1.4 Test Procedures............................................................................................................... 15 4.1.5 Deviation from Test Standard............................................................................................ 16 4.1.6 Test Setup ....................................................................................................................... 16 4.1.7 EUT Operating Conditions ................................................................................................ 17 4.1.8 Test Results .................................................................................................................... 18 4.2 Conducted Out of Band Emission Measurement ......................................................................... 24 4.2.1 Limits of Conducted Out of Band Emission Measurement ................................................... 24 4.2.2 Test Setup ....................................................................................................................... 24 4.2.3 Test Instruments .............................................................................................................. 24 4.2.4 Test Procedure ................................................................................................................ 24 4.2.5 Deviation from Test Standard............................................................................................ 24 4.2.6 EUT Operating Condition ................................................................................................. 24 4.2.7 Test Results .................................................................................................................... 25 5 Pictures of Test Arrangements ....................................................................................................... 26 Appendix – Information on the Testing Laboratories .......................................................................... 27 Report No.: RF180619C29-4 Page No. 2 / 27 Report Format Version:6.1.2

Release Control Record Issue No. Description Date Issued RF180619C29-4 Original Release Oct. 26, 2018 Report No.: RF180619C29-4 Page No. 3 / 27 Report Format Version:6.1.2

1 Certificate of Conformity Product: Amber Life Brand: LatticeWork Test Model: AM12 Sample Status: Engineering Sample Applicant: LatticeWork, Inc. Test Date: Oct. 18, 2018 Standards: 47 CFR FCC Part 15, Subpart E (Section 15.407) 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Oct. 26, 2018 Rona Chen / Specialist Approved by : , Date: Oct. 26, 2018 Dylan Chiou / Project Engineer Report No.: RF180619C29-4 Page No. 4 / 27 Report Format Version:6.1.2

0 ommert 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) 47 CFR FCC Part 15, Subpart E (Section 15.407) FCC Test tem Result Remarks Clause 15.205 / 15.209 / . ns Meet the requirement of limit. 15.247(d) . sls ib } 1 Radiated Emissions Pass Minimum passing margin is —1.8 dB at 15.407(b) 39.62 MHz. (1/2/3/4(¥ii)/6) 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Expended Uncertainty Measurement Frequenc sisante (k=2) (©) Conducted Emissions at mains ports 150 kHz ~ 30 MHz 2.44 dB . 20. 30 MHz ~ 200 MHz 3.86 dB Radiated Emissions up to 1 GHz 200 MHz ~ 1000 MHz 3.87 dB 1 GHz ~ 18 GHz 2.29 dB Radiated Emissions above 1 GHz 18 GHz ~ 40 GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180619029—4 Page No. 5 / 27 Report Format Version:6.1.2

3 General Information 3.1 General Description of EUT Product Amber Life Brand LatticeWork Test Model AM12 Status of EUT Engineering Sample Power Supply Rating 19.0 Vdc (Adapter) CCK, DQPSK, DBPSK for DSSS Modulation Type 256QAM, 64QAM, 16QAM, QPSK, BPSK for OFDM Modulation Technology DSSS, OFDM 802.11a: 54.0/ 48.0/ 36.0/ 24.0/ 18.0/ 12.0/ 9.0/ 6.0 Mbps 802.11b: 11.0 / 5.5 / 2.0 / 1.0 Mbps Transfer Rate 802.11g: 54.0 / 48.0 / 36.0 / 24.0 / 18.0 / 12.0 / 9.0 / 6.0 Mbps 802.11n: up to 600.0 Mbps 802.11ac: up to 1733.3 Mbps 2.4GHz: 2412 ~ 2462 MHz Operating Frequency 5GHz: 5260 ~ 5320 MHz, 5500 ~ 5700 MHz 2412 ~ 2462 MHz 11 for 802.11b, 802.11g, 802.11n (HT20), 802.11ac (VHT20) 7 for 802.11n (HT40), 802.11ac (VHT40) 5260 ~ 5320 MHz 4 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 2 for 802.11n (HT40), 802.11ac (VHT40) Number of Channel 1 for 802.11ac (VHT80) 5500 ~ 5700 MHz 11 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 5 for 802.11n (HT40), 802.11ac (VHT40) 2 for 802.11ac (VHT80) Simultaneous Transmission: 9 for 802.11ac (VHT80+80) Dipole antenna with 4.13 dBi gain (Chain-0) PIFA antenna with 3.25 dBi gain (Chain-1) Antenna Type (2410 ~ 2462 MHz) Dipole antenna with 4.23 dBi gain (Chain-2) Dipole antenna with 2.87 dBi gain (Chain-3) Dipole antenna with 4.58 dBi gain (Chain-0) PIFA antenna with 3.81 dBi gain (Chain-1) (5260 ~ 5320 MHz) Dipole antenna with 3.37 dBi gain (Chain-2) Dipole antenna with 3.76 dBi gain (Chain-3) Dipole antenna with 4.36 dBi gain (Chain-0) PIFA antenna with 3.91 dBi gain (Chain-1) (5500 ~ 5700 MHz) Dipole antenna with 3.62 dBi gain (Chain-2) Dipole antenna with 3.70 dBi gain (Chain-3) Antenna Connector IPEX Accessory Device Refer to Note as below Data Cable Supplied Refer to Note as below Report No.: RF180619C29-4 Page No. 6 / 27 Report Format Version:6.1.2

Note: 1. The EUT incorporates a MIMO function. Physically, the EUT provides two completed transmitters and two receivers. Modulation Mode Tx Function CDD Beamforming 2.4 GHz 802.11b 4TX Support Not Support 802.11g 4TX Support Not Support 802.11n (HT20) 4TX Support Not Support 802.11n (HT40) 4TX Support Not Support 802.11ac (VHT20) 4TX Support Not Support 802.11ac (VHT40) 4TX Support Not Support 5 GHz 802.11a 4TX Support Not Support 802.11n (HT20) 4TX Support Support 802.11n (HT40) 4TX Support Support 802.11ac (VHT20) 4TX Support Support 802.11ac (VHT40) 4TX Support Support 802.11ac (VHT80) 4TX Support Support 802.11ac (VHT80+80) 2TX+2TX Support Support 2. For 802.11ac (VHT80+80), the available channels are listed as below: Modulation Mode Available Channel 42+58 42+106 42+122 58+106 58+122 802.11ac (VHT80+80) 58+155 106+122 106+155 122+155 3. The EUT contains following accessory devices. Product Brand Model Description I/P: 100-240 Vac, 50-60 Hz, 1.7 A O/P: 19 Vdc, 3.42 A, 65W Adapter Chicony A12-065N2A 1.7m shielded DC cable with 1 core 0.9m non-shielded AC cable w/o core Cat.5e Cable N/A N/A 1.75m non-shielded cable w/o core 4. The above EUT information is declared by manufacturer and for more detailed features description, please refers to the manufacturer's specifications or user's manual. Report No.: RF180619C29-4 Page No. 7 / 27 Report Format Version:6.1.2

3.2 Description of Test Modes For 2412 ~ 2462 MHz 11 channels are provided for 802.11b, 802.11g, 802.11n (HT20), and 802.11ac (VHT20): Channel Frequency (MHz) Channel Frequency (MHz) 1 2412 7 2442 2 2417 8 2447 3 2422 9 2452 4 2427 10 2457 5 2432 11 2462 6 2437 7 channels are provided for 802.11n (HT40) and 802.11ac (VHT40): Channel Frequency (MHz) Channel Frequency (MHz) 3 2422 7 2442 4 2427 8 2447 5 2432 9 2452 6 2437 For 5260 ~ 5320 MHz 4 channels are provided for 802.11a, 802.11n (HT20), and 802.11ac (VHT20): Channel Frequency (MHz) Channel Frequency (MHz) 52 5260 60 5300 56 5280 64 5320 2 channels are provided for 802.11n (HT40) and 802.11ac (VHT40): Channel Frequency (MHz) Channel Frequency (MHz) 54 5270 62 5310 1 channel is provided for 802.11ac (VHT80): Channel Frequency (MHz) 58 5290 Report No.: RF180619C29-4 Page No. 8 / 27 Report Format Version:6.1.2

For 5500 ~ 5700 MHz 11 channels are provided for 802.11a, 802.11n (HT20), and 802.11ac (VHT20): Channel Frequency (MHz) Channel Frequency (MHz) 100 5500 124 5620 104 5520 128 5640 108 5540 132 5660 112 5560 136 5680 116 5580 140 5700 120 5600 5 channels are provided for 802.11n (HT40) and 802.11ac (VHT40): Channel Frequency (MHz) Channel Frequency (MHz) 102 5510 126 5630 110 5550 134 5670 118 5590 2 channels are provided for 802.11ac (VHT80): Channel Frequency (MHz) Channel Frequency (MHz) 106 5530 122 5610 For Simultaneous Transmission: 9 channels are provided for 802.11ac (VHT80+80): Channel Frequency (MHz) Channel Frequency (MHz) 42+58 5210 MHz + 5290 MHz 58+155 5290 MHz + 5775 MHz 42+106 5210 MHz + 5530 MHz 106+122 5530 MHz + 5610 MHz 42+122 5210 MHz + 5610 MHz 106+155 5530 MHz + 5775 MHz 58+106 5290 MHz + 5530 MHz 122+155 5610 MHz + 5775 MHz 58+122 5290 MHz + 5610 MHz Report No.: RF180619C29-4 Page No. 9 / 27 Report Format Version:6.1.2

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable To Description Mode RE1G RE<1G OB - √ √ √ - Where RE1G: Radiated Emission above 1 GHz RE<1G: Radiated Emission below 1 GHz OB: Conducted Out of Band Emission NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane. Radiated Emission Test (Above 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Frequency Band Configure Mode Available Channel Tested Channel Remark (MHz) Mode - 2412-2462 802.11b 1 to 11 6+54 - - 5260-5320 802.11ac (V HT40) 54 to 62 Radiated Emission Test (Below 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Frequency Band Configure Mode Available Channel Tested Channel Remark (MHz) Mode - 2412-2462 802.11b 1 to 11 6+54 - - 5260-5320 802.11ac (V HT40) 54 to 62 Conducted Out of Band Emission Measurement: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Frequency Band Configure Mode Available Channel Tested Channel Remark (MHz) Mode - 2412-2462 802.11b 1 to 11 6+54 - - 5260-5320 802.11ac (V HT40) 54 to 62 Test Condition: Applicable To Environmental Conditions Input Power Tested by RE1G 25 deg. C, 65 % RH 120 Vac, 60 Hz Willy Cheng RE<1G 25 deg. C, 65 % RH 120 Vac, 60 Hz Willy Cheng OB 25 deg. C, 65 % RH 19.0 Vdc Frank Chiu Report No.: RF180619C29-4 Page No. 10 / 27 Report Format Version:6.1.2

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product Brand Model No. Serial No. FCC ID 1. Load N/A N/A N/A N/A 2. Notebook DELL E5410 1HC2XM1 N/A No. Signal Cable Description Of The Above Support Units 1. 1.75m shielded adapter cable with 1 core 2. 1.5m non-shielded LAN Cable 3. 1.5m non-shielded LAN Cable 4. 5 non-shielded LAN Cable 5m Note: 1. All power cords of the above support units are non-shielded (1.8m). 3.3.1 Configuration of System under Test Load Notebook EUT (Power from AC Adapter) *Test Table 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart E (15.407) FCC Part 15, Subpart C (15.247) KDB 789033 D02 General UNII Test Procedures New Rules v02r01 KDB 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF180619C29-4 Page No. 11 / 27 Report Format Version:6.1.2

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F (kHz) 300 0.490 ~ 1.705 24000/F (kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000 MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20 dB under any condition of modulation. Report No.: RF180619C29-4 Page No. 12 / 27 Report Format Version:6.1.2

4.1.2 Limits of Unwanted Emission Out of the Restricted Bands Applicable To Limit 789033 D02 General UNII Test Procedures Field Strength at 3 m New Rules v02r01 PK: 74 (dBµV/m) AV: 54 (dBµV/m) Frequency Equivalent Field Applicable To EIRP Limit Band Strength at 3 m 5150~5250 MHz 15.407(b)(1) 5250~5350 MHz 15.407(b)(2) PK: -27 (dBm/MHz) PK: 68.2 (dBµV/m) 5470~5725 MHz 15.407(b)(3) PK:-27 (dBm/MHz) *1 PK: 68.2 (dBµV/m) *1 PK:10 (dBm/MHz) *2 PK:105.2 (dBµV/m) *2 15.407(b)(4)(i) 5725~5850 MHz PK:15.6 (dBm/MHz) *3 PK: 110.8 (dBµV/m) *3 PK:27 (dBm/MHz) *4 PK:122.2 (dBµV/m) *4 15.407(b)(4)(ii) Emission limits in section 15.247(d) *1 beyond 75 MHz or more above of the band edge. *2 below the band edge increasing linearly to 10 dBm/MHz at 25 MHz above. *3 below the band edge increasing linearly to a level of 15.6 dBm/MHz at 5 MHz above. *4 from 5 MHz above or below the band edge increasing linearly to a level of 27 dBm/MHz at the band edge. Note: The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength: 1000000 30 P E= µV/m, where P is the eirp (Watts). 3 Report No.: RF180619C29-4 Page No. 13 / 27 Report Format Version:6.1.2

4.1.3 Test Instruments Description & Date of Due Date of Model No. Serial No. Manufacturer Calibration Calibration Test Receiver ESIB7 100187 May 29, 2018 May 28, 2019 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100041 Dec. 12, 2017 Dec. 11, 2018 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-171 Dec. 11, 2017 Dec. 10, 2018 SCHWARZBECK HORN Antenna 9120D 209 Dec. 13, 2017 Dec. 12, 2018 SCHWARZBECK HORN Antenna BBHA 9170 9170-480 Dec. 01, 2017 Nov. 30, 2018 SCHWARZBECK Loop Antenna HLA 6121 45745 Jun. 14, 2018 Jun. 13, 2019 TESEQ Preamplifier Agilent 8447D 2944A10738 Aug. 21, 2018 Aug. 20, 2019 (Below 1GHz) Preamplifier Agilent 8449B 3008A02465 Apr. 03, 2018 Apr. 02, 2019 (Above 1GHz) RF signal cable 8D-FB Cable-CH3-01 Aug. 21, 2018 Aug. 20, 2019 WOKEN RF signal cable Cable-CH3-03 SUCOFLEX 104 Aug. 21, 2018 Aug. 20, 2019 HUBER+SUHNER (223653/4) RF signal cable SUCOFLEX Cable-CH3-03 HUBER+SUHNER& 104&EMC104-SM- Aug. 21, 2018 Aug. 20, 2019 (309224+170907) EMCI SM-8000 Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.5 Antenna Tower MA 4000 013303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021702 NA NA BV ADT Turn Table TT100 TT93021702 NA NA BV ADT Turn Table Controller SC100 SC93021702 NA NA BV ADT 26GHz ~ 40GHz Amplifier 8449B 3008A01963 Aug. 21, 2018 Aug. 20, 2019 Agilent Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 3. 3. The horn antenna and preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1 GHz if tested. 4. The IC Site Registration No. is IC7450F-3. Report No.: RF180619C29-4 Page No. 14 / 27 Report Format Version:6.1.2

4.1.4 Test Procedures For Radiated Emission below 30 MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Both Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9 kHz at frequency below 30 MHz. For Radiated Emission above 30 MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30 MHz ~ 1 GHz) / 1.5 meters (for above 1 GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detected function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120 kHz for Quasi-peak detection (QP) at frequency below 1 GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1 GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98 %) or 10 Hz (Duty cycle ≥ 98 %) for Average detection (AV) at frequency above 1 GHz. (11a: RBW = 1 MHz, VBW = 1 kHz ; 11ac (VHT20): RBW = 1 MHz, VBW = 1 kHz ; 11ac (VHT40): RBW = 1 MHz, VBW = 3 kHz ; 11ac (VHT80): RBW = 1 MHz, VBW = 1 kHz ; 11ac (VHT80+80): RBW = 1 MHz, VBW = 1 kHz) 4. All modes of operation were investigated and the worst-case emissions are reported. Report No.: RF180619C29-4 Page No. 15 / 27 Report Format Version:6.1.2

4.1.5 Deviation from Test Standard No deviation. 4.1.6 Test Setup <Radiated Emission below 30 MHz> 1m EUT& 3m Support Units Turn Table 80 cm Ground Plane Test Receiver <Radiated Emission 30 MHz to 1 GHz> Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF180619C29-4 Page No. 16 / 27 Report Format Version:6.1.2

<Radiated Emission above 1 GHz> Ant. Tower 1-4 m Variable EUT& 3m Support Units Turn Table Absorber 150 cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.7 EUT Operating Conditions a. Placed the EUT on a testing table. b. Use the software to control the EUT under transmission condition continuously at specific channel frequency. Report No.: RF180619C29-4 Page No. 17 / 27 Report Format Version:6.1.2

3) ommert 4.1.8 Test Results Above 1 GHz Data : 802.11b + 802.11ac (VHTAO) FREQUENCY RANGE |1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION No.| FREQ. LEVEL (d';’\c;rm) MA((?SIN HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) " (m) (Degree) (dBuV) (cB/m) 1 "2437.00 116.1 PK 3.32 H 74 82.7 33.4 2 *2437.00 112.0 AV 3.32 H 74 78.6 38.4 3 2483.50 62.0 PK 74.0 —12.0 3.26 H 38 28.8 33.2 4 2483.50 50.5 AV 54.0 —8.5 3.26 H 38 17.3 33.2 5 4874.00 49.6 PK 74.0 24. 4 8.11 H 185 45.9 3.7 6 4874.00 44.7 AV 54.0 —9.3 3.11 H 185 41.0 3.7 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor{dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) — Pre—Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level —Limit value 5. " * ": Fundamental frequency. Level (dBuvim) Report No.: RF180619029—4 Page No. 18 / 27 Report Format Version:6.1.2

CHANNEL TX Channel 6+54 DETECTOR Peak (PK) FREQUENCY RANGE 25GHz ~ 40GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION LIMIT MARGIN NO. FREQ. LEVEL HEIGHT ANGLE VALUE FACTOR (dBuV/m) (dB) (MHz) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 5150.00 54.4 PK 74.0 -19.6 1.88 H 173 50.5 3.9 2 5150.00 41.8 AV 54.0 -12.2 1.88 H 173 37.9 3.9 3 *5270.00 106.3 PK 2.09 H 135 66.9 39.4 4 *5270.00 94.4 AV 2.09 H 135 55.0 39.4 5 #10540.00 60.9 PK 68.2 -7.3 2.29 H 163 44.0 16.9 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " # ": The radiated frequency is out of the restricted band. Report No.: RF180619C29-4 Page No. 19 / 27 Report Format Version:6.1.2

CHANNEL TX Channel 6+54 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2437.00 120.5 PK 2.36 V 311 87.1 33.4 2 *2437.00 116.5 AV 2.36 V 311 83.1 33.4 3 2483.50 63.1 PK 74.0 -10.9 2.74 V 308 29.9 33.2 4 2483.50 51.1 AV 54.0 -2.9 2.74 V 308 17.9 33.2 5 4874.00 52.0 PK 74.0 -22.0 1.98 V 226 48.3 3.7 6 4874.00 46.0 AV 54.0 -8.0 1.98 V 226 42.3 3.7 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180619C29-4 Page No. 20 / 27 Report Format Version:6.1.2

CHANNEL TX Channel 6+54 DETECTOR Peak (PK) FREQUENCY RANGE 25GHz ~ 40GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 5150.00 57.9 PK 74.0 -16.1 1.70 V 177 54.0 3.9 2 5150.00 44.4 AV 54.0 -9.6 1.70 V 177 40.5 3.9 3 *5270.00 76.9 PK 1.23 V 351 73.2 3.7 4 *5270.00 65.7 AV 1.23 V 351 62.0 3.7 5 #10540.00 62.9 PK 68.2 -5.3 2.41 V 122 46.0 16.9 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " # ": The radiated frequency is out of the restricted band. Report No.: RF180619C29-4 Page No. 21 / 27 Report Format Version:6.1.2

9 kHz ~ 30 MHz Data: The amplitude of spurious emissions attenuated more than 20 dB below the permissible value is not required to be report. 30 MHz ~ 1 GHz Worst-Case Data: 802.11b + 802.11ac (VHT40) CHANNEL TX Channel 6+54 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 30MHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 78.51 27.3 QP 40.0 -12.7 1.50 H 112 40.3 -13.0 2 125.17 35.1 QP 43.5 -8.4 1.50 H 248 46.0 -10.9 3 158.22 31.7 QP 43.5 -11.8 1.99 H 121 40.4 -8.7 4 183.50 37.2 QP 43.5 -6.3 1.50 H 258 47.6 -10.4 5 344.87 31.5 QP 46.0 -14.5 1.01 H 38 37.8 -6.3 6 584.02 41.4 QP 46.0 -4.6 1.50 H 123 42.4 -1.0 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF180619C29-4 Page No. 22 / 27 Report Format Version:6.1.2

CHANNEL TX Channel 6+54 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 30MHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 39.62 38.2 QP 40.0 -1.8 1.00 V 354 48.3 -10.1 2 66.84 37.0 QP 40.0 -3.0 1.49 V 328 47.4 -10.4 3 154.33 33.1 QP 43.5 -10.4 1.00 V 284 41.9 -8.8 4 500.42 39.8 QP 46.0 -6.2 1.00 V 67 42.7 -2.9 5 574.30 43.2 QP 46.0 -2.8 1.00 V 161 44.5 -1.3 6 933.99 39.6 QP 46.0 -6.4 1.99 V 331 33.8 5.8 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF180619C29-4 Page No. 23 / 27 Report Format Version:6.1.2

4.2 Conducted Out of Band Emission Measurement 4.2.1 Limits of Conducted Out of Band Emission Measurement Below -30 dB of the highest emission level of operating band (in 100 kHz Resolution Bandwidth). 4.2.2 Test Setup Spectrum EUT Attenuator Analyzer 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedure MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.2.5 Deviation from Test Standard No deviation. 4.2.6 EUT Operating Condition The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF180619C29-4 Page No. 24 / 27 Report Format Version:6.1.2

4.2.7 Test Results The spectrum plots are attached on the following images. D1 line indicates the highest level, and D2 line indicates the 30 dB offset below D1. It shows compliance with the requirement. 802.11b Ch6 (Chain 3) + 802.11b Ch6 (Chain 2) + 802.11ac (VHT40) Ch54 (Chain 0) 802.11ac (VHT40) Ch54 (Chain 1) 802.11b Ch6 (Chain 1) + 802.11b Ch6 (Chain 0) + 802.11ac (VHT40) Ch54 (Chain 2) 802.11ac (VHT40) Ch54 (Chain 3) Report No.: RF180619C29-4 Page No. 25 / 27 Report Format Version:6.1.2

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180619C29-4 Page No. 26 / 27 Report Format Version:6.1.2

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180619C29-4 Page No. 27 / 27 Report Format Version:6.1.2


Document Created: 2019-03-21 19:51:24
Document Modified: 2019-03-21 19:51:24
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC