RF Exposure report

FCC ID: 2AP3D-CT001

RF Exposure Info

Download: PDF
FCCID_4301355

                                                           RF Exposure Report

                       Report No.: SA181205C09

                            FCC ID: 2AP3D-CT001

                       Test Model: CT001

                 Received Date: Dec. 05, 2018

          Date of Evaluation: Mar. 04, 2019

                     Issued Date: Mar. 08, 2019


                         Applicant: Spotify USA, Inc.

                          Address: 45 West 18th Street, New York, NY 10011, USA



                        Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

                    Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan,
                                 R.O.C.
                  Test Location: No. 19, Hwa Ya 2nd Rd, Wen Hwa Vil, Kwei Shan Dist., Taoyuan City
                                 33383, Taiwan (R.O.C)
            FCC Registration /
                                            788550 / TW0003
       Designation Number:




This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product
unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you
provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided,
however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time
shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific
mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report
must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies.




Report No.: SA181205C09                                              Page No. 1 / 6                                             Report Format Version: 6.1.1


                                                                   Table of Contents
Release Control Record .................................................................................................................................. 3
1         Certificate of Conformity ...................................................................................................................... 4
2         RF Exposure .......................................................................................................................................... 5
    2.1      Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5
    2.2      MPE Calculation Formula ................................................................................................................... 5
    2.3      Classification ....................................................................................................................................... 5
    2.4      Calculation Result of Maximum Conducted Power ............................................................................. 6




Report No.: SA181205C09                                              Page No. 2 / 6                                              Report Format Version: 6.1.1


                                         Release Control Record


Issue No.             Description                                        Date Issued
SA181205C09           Original Release                                   Mar. 08, 2019




Report No.: SA181205C09                     Page No. 3 / 6        Report Format Version: 6.1.1


1    Certificate of Conformity


            Product: Music Streaming Device

              Brand: Spotify

        Test Model: CT001

    Sample Status: Engineering Sample

          Applicant: Spotify USA, Inc.

Date of Evaluation: Mar. 04, 2019

         Standards: FCC Part 2 (Section 2.1091)

                          KDB 447498 D01 General RF Exposure Guidance v06
                          IEEE C95.1-1992



The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd.,
Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts
of the measurements of the sample’s RF characteristics under the conditions specified in this report.




      Prepared by :                                             ,   Date:        Mar. 08, 2019
                                Ivonne Wu / Supervisor




     Approved by :                                              ,   Date:        Mar. 08, 2019
                             Dylan Chiou / Project Engineer




Report No.: SA181205C09                        Page No. 4 / 6                         Report Format Version: 6.1.1


2      RF Exposure

2.1      Limits for Maximum Permissible Exposure (MPE)

    Frequency Range          Electric Field     Magnetic Field       Power Density        Average Time
         (MHz)              Strength (V/m)      Strength (A/m)         (mW/cm2)             (minutes)
                             Limits For General Population / Uncontrolled Exposure
        0.3-1.34                 614                  1.63                (100)*                 30
         1.34-30                824/f                2.19/f             (180/f2)*                30
         30-300                  27.5                0.073                 0.2                   30
        300-1500                  …                    …                  f/1500                 30
      1500-100,000                …                    …                   1.0                   30

f = Frequency in MHz ; *Plane-wave equivalent power density



2.2      MPE Calculation Formula

Pd = (Pout*G) / (4*pi*r2)
where
Pd = power density in mW/cm 2
Pout = output power to antenna in mW
G = gain of antenna in linear scale
pi = 3.1416
r = distance between observation point and center of the radiator in cm



2.3      Classification

      The antenna of this product, under normal use condition, is at least 20cm away from the body of the user.
         So, this device is classified as Mobile Device.




Report No.: SA181205C09                          Page No. 5 / 6                         Report Format Version: 6.1.1


2.4     Calculation Result of Maximum Conducted Power

                Frequency Band    Max Power     Antenna Gain   Distance   Power Density       Limit
      Band
                    (MHz)           (dBm)           (dBi)        (cm)       (mW/cm2)        (mW/cm2)
 WCDMA II          1850-1910            25             0.1       20          0.064              1.00

 WCDMA IV          1710-1755            25            -0.1       20          0.061              1.00

 WCDMA V            824-849             25            -0.5       20          0.056              0.55

      LTE 2        1850-1910            24             0.1       20          0.051              1.00

      LTE 4        1710-1755            24            -0.1       20          0.049              1.00

      LTE 5         824-849             24            -0.5       20          0.045              0.55

      LTE 12        699-716             24              0        20          0.050              0.47

      WLAN         2412-2462            19             0.4       20          0.017              1.00

       BT          2402-2480            5.5            0.4       20          0.001              1.00



Conclusion:
The formula of calculated the MPE is:
CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1
CPD = Calculation power density
LPD = Limit of power density


WWAN + WLAN + BT = 0.05 / 0.47 + 0.034 / 1 + 0.017 / 1 = 0.124
Therefore the maximum calculations of above situations are less than the “1” limit.



--- END ---




Report No.: SA181205C09                       Page No. 6 / 6                    Report Format Version: 6.1.1



Document Created: 2019-05-31 05:27:19
Document Modified: 2019-05-31 05:27:19

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC