User Manual

FCC ID: 2AOYS-IPBM06

Users Manual

Download: PDF
FCCID_3780477

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd IPBM-06 Datasheet MESH Bluetooth Low Energy (BLE) 4.0 Module Module No.: IPBM-06 Version: V1.0 Date: 2018-1-28 3/F,A5 Building Zhiyuan Community No.1001,Xueyuan Road Nanshan District,Shenzhen City TEL: 0755-83949973 FAX:0755-82899448 E-mail:songmx@jingxunsoft.com

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd Content 1. Introduction...........................................................................................................................................3 2. Features.................................................................................................................................................. 4 3. Applications...........................................................................................................................................4 4. Module Diagram.................................................................................................................................. 5 5. Module Schematic...............................................................................................................................8 6. Pins Description....................................................................................................................................9 7. Electronic Specification...................................................................................................................... 9 8. Power Consumption......................................................................................................................... 10 9. Antenna Specification...................................................................................................................... 10 10. Ordering Information.....................................................................................................................11 11. Package.............................................................................................................................................. 11 12. Reflow Profile................................................................................................................................... 11 13. Application Design Note...............................................................................................................12 14. Antenna Design............................................................................................................................... 12 15. FCC Compliance...............................................................................................................................13 2

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 1. Introduction The IPBM-06 with optional internal PCB printing antenna and IPEX RF connector is MESH Bluetooth Low Energy (BLE) solution which is fully Bluetooth 4.0 standard compliant and allows easy connectivity with Bluetooth Smart Ready devices. IPBM-06 supports BLE slave and master mode operation, including broadcast, encryption, connection updates, and channel map updates. It is RoHS-compliant and 100% lead (Pb)-free. With internal 512KBytes Flash and 16KB SDRAM are programmable for more applications, 14bits ADC with PGA, 6 channels PWM, three quadrature decoders, GPIOs. 8 pins are easy installation with removable to be an SMT module (PCB stamp holes linking) in the mean time. 3

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 2. Features  TLSR8267/9F512 system on chip  Built-in Flash 512KBytes  Built-in 16KB(TLSR8267) , 32KB(TLSR8269) SDRAM  Compact size 22 x 14 x 2.8mm  Up to 6 channels PWM  Embedded Hardware AES  Host Controller Interface (HCI) over UART, I2C and USB 2.0 in full speed  Class 1 supported with 8dBm maximum TX power  Operation Temperature: ET Version:-40 to 85 ℃, AT version: -40℃~+125℃  Bluetooth 4.0 1Mbps, Boost Mode: 2Mbps  TX RF Power: +7dBm  RX :-92dBm BT4.0 Sensitivity  RSSI Monitoring  Embedded LDO  Battery monitoring  Low power consumption  100k program/erase, 20 years data retention 3. Applications  Smart Devices Switch, Remote Control and 3D glasses  LED Lighting control  Smartphone accessories  Wireless Microphone  Health monitoring  Sports and fitness tracking  Wearable devices  PC and tablet peripherals, including Mouse / Keyboard 4

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 4. Module Diagram TLS8267 SoC diagram 5

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd BLE Module diagram Remote Module ANT ROW0‥ROW2 COL0‥COL4 BLE Module VDD GND PWR (P3,PWM01)R_PWM1 LED Module (P16,PWM02)G_PWM2 12MHzX (P17,PWM03)B_PWM3 TAL (P18,PWM04)BR_PWM4 (P1,PWM00) CT_PWM5 (P21,GPIO4) _GPIO4 PCBA top view diagram Dimension unit: mm Top View 6

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd Dimension Diagram Dimension unit: mm Bottom View PCB Thickness: 0.8+/-0.15mm Side View IPBM-06-180 IPBM-06-90 7

r> w smm % $4Hen 2406 inour

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 6. Pins Description Pin NAME Inter I/O Description face 1 VDD Power I DC 3.3V input, Max 3.6V, Min 3.0V 2 GND Ground - Ground 3 PWM1-R Analog I/O SoC TLSR8267F512P3 PWM01 Red (R) 4 PWM2-G Analog I/O SoC TLSR8267F512P16 PWM02 Green (G) 5 PWM3-B Analog I/O SoC TLSR8267F512P17 PWM03 Blue (B) 6 PWM4-BR Analog I/O SoC TLSR8267F512P18 PWM04 Bright (BR) 7 PWM5-CT Analog I/O SoC TLSR8267F512P1PWM00Control (CT) 8 B1 Digital I/O SoC TLSR8267F512P11 B1 9 ROW0 Analog I/O SoC TLSR8267F512P12 Remote Port 10 ROW1 Analog I/O SoC TLSR8267F512P13 Remote Port 11 ROW2 Analog I/O SoC TLSR8267F512P14 Remote Port 12 BAT_DET Analog I/O SoC TLSR8267F512P15 Remote Control Battery Test 13 LED Analog I/O SoC TLSR8267F512P19 Remote Light 14 GND2 Ground Ground 15 GND1 Ground Ground 16 COL4 Analog I/O SoC TLSR8267F512P27 Remote Port 17 COL3 Analog I/O SoC TLSR8267F512P29 Remote Port 18 COL2 Analog I/O SoC TLSR8267F512P30 Remote Port 19 COL1 Analog I/O SoC TLSR8267F512P31 Remote Port 20 COL0 Analog I/O SoC TLSR8267F512P32 Remote Port 21 AVDD1 Power I DC 3.3V input, Max 3.6V, Min 3.0V 22 AVDD Power I DC 3.3V input, Max 3.6V, Min 3.0V 7. Electronic Specification Item Specification RF Transmitting Power Level 7 dBm Max RF Receiver Sensitivity -93 dBm at 1Mbps Flash 512kb 9

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd Antenna Printed PCB Antenna 0 dBi Gain Linking Distance 30 M Out of Sight RAM 16 KB x 32 bits Data Rate 250 kbps, 500 kbps, 1 Mbps, 2 Mbps Physical Connectors 1 x 8 pins 1.27mm pitch through terminal 14 holes PCB board edge stamp holes Operation Voltage 2.9V to 3.6V Operation Temperature -40 to 125 ℃ Security 128 Bit AES encryption Interface PWM, UART, I2C, USB. GPIO EMC To be approved 8. Power Consumption Operation Mode Consumption Operation (TX/RX) 0dBm 30mA Standby (Deep Sleep) depend on firmware 0.7uA (optional by firmware) 9. Antenna Specification ITEM UNIT MIN TYP MAX Frequency MHz 2400 2500 V.S.W.R 2.0 Gain(AVG) dBi 0 Maximum input power W 1 Characteristics TYPE Meander IFA Polarization Vertical Radiated Pattern Omni-directional Impendence 50 SIZE 14 X 4 X 22 mm Optional internal antenna by PCB printing antenna. 10

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 10. Ordering Information Part Number Description IPBM-06-00-I_V3.1 Internal Printing PCB Antenna, SMT mounted form IPBM-06-90-I_V3.1 Internal Printing PCB Antenna, vertically mounted with pin header IPBM-06-135-I_V3.1 Internal Printing PCB Antenna, 135 degree mounted with pin header IPBM-06-180-I_V3.1 Internal Printing PCB Antenna, horizontally mounted with pin header IPBM-06-00-E_V3.1 External Antenna with IPEX connector, SMT mounted form External Antenna with IPEX connector,vertically mounted with pin IPBM-06-90-E_V3.1 header External Antenna with IPEX connector, 135 degree mounted with pin IPBM-06-135-E_V3.1 header External Antenna with IPEX connector, horizontally mounted with pin IPBM-06-180-E_V3.1 header 11. Package Tray plate: To Be Defined 12. Reflow Profile 11

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 13. Application Design Note To Be Discussed 14. Antenna Design NO GROUND Copper Boundary Influence of GND on Antenna a) The GND interrupts the emission of antenna but isessential. b) RF vertical GND is important in antennadesign. c) Normally, the emission rate is improved as more GND is secured and edged GND of antenna is cut. 12

Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd 15. FCC Compliance FCC statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. “Contains Transmitter module FCC ID: 2AOYS-IPBM06” The modular must be installed in the host that assign by Shenzhen Jingxun Software Telecommunication Technology Co., Ltd., if other host types used would need further evaluation and possible C2PC if they are not significantly similar to the one tested. 13

A . <p (MBtAon l


Document Created: 2018-02-28 09:48:29
Document Modified: 2018-02-28 09:48:29
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC