Test report

FCC ID: 2AOVX-H1

Test Report

Download: PDF
FCCID_3873165

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE180411901 1 Cover Page FCC REPORT Applicant: Green Start Industries LLC Address of Applicant: 3305 Fairmount Ave Ocean NJ USA Equipment Under Test (EUT) Product Name: keyless transmitter Model No.: 2AOVX-3B, 2AOVX-4B FCC ID: 2AOVX-H1 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.231(a) Date of sample receipt: 24 Apr., 2018 Date of Test: 24 Apr., to 16 May, 2018 Date of report issue: 17 May, 2018 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.

Report No: CCISE180411901 2 Version Version No. Date Description 00 17 May, 2018 Original Prepared By: Date: 17 May, 2018 Test Engineer Check By: Date: 17 May, 2018 Project Engineer Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 24

Report No: CCISE180411901 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 TEST SUMMARY .................................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T........................................................................................................................ 5 5.3 TEST MODE ............................................................................................................................................................ 5 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 5 5.5 LABORATORY FACILITY.......................................................................................................................................... 6 5.6 LABORATORY LOCATION ....................................................................................................................................... 6 5.7 MEASUREMENT UNCERTAINTY.............................................................................................................................. 6 5.8 TEST INSTRUMENTS LIST ....................................................................................................................................... 6 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 7 6.1 ANTENNA REQUIREMENT ....................................................................................................................................... 7 6.2 RADIATED EMISSION ............................................................................................................................................. 8 6.2.1 Field Strength Of The Fundamental Signal .............................................................................................. 10 6.2.2 Spurious Emissions ..................................................................................................................................... 12 6.3 20DB BANDWIDTH ............................................................................................................................................... 13 6.4 DURATION TIME ................................................................................................................................................... 15 7 TEST SETUP PHOTOS...................................................................................................................................... 17 8 EUT CONSTRUCTIONAL PHOTOS ................................................................................................................. 18 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 24

Report No: CCISE180411901 4 Test Summary Test Item Section in CFR 47 Result Antenna requirement 15.203 Pass Field strength of the fundamental signal 15.231 (a) Pass Spurious emissions 15.231 (b)/15.209 Pass 20dB Bandwidth 15.231 (c) Pass Dwell time 15.231 (a) Pass Conducted Emission 15.107 N/A Remarks: N/A: The EUT not applicable of the test item. Pass: The EUT complies with the essential requirements in the standard. Test according to ANSI C63.4:2014 and ANSI C63.10:2013. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 4 of 24

c c I s Report No: CCISE180411901 5 General Information 5.1 Client Information Applicant: Green Start Industries LLC Address of Applicant: 3305 Fairmount Ave Ocean NJ USA Manufacturer: Green Start Industries LLC Address of Manufacturer: 3305 Fairmount Ave Ocean NJ USA 5.2 General Description of E.U.T. Product Name: keyless transmitter Model No.: 2AOVX—3B, 2AOVX—4B Operation Frequency: 433.92MHz Channel numbers: 1 Modulation type: FSK Antenna Type: PCB antenna Antenna gain: 0 dBi Power supply: DC 3V (CR2025 battery) Remark: The Model No.: 2AOVX—3B, 2A0VX—4B chip, the same components. only buttons quantity different: 2AOVX—3B is 3 buttons. 2AOVX—4B is 4 buttons. 5.3 Test mode Transmitting mode: Keep the EUT in transmitting mode with modulation (new battery used) Pre—Test Mode: CCIS has verified the construction and function in typical operation, The EUT was placed on three different polar directions; i.e. X axis, Y axis, Z axis. which was shown in this test report and defined as follows: Axis X Y Z Field Strength(dBuV/m) 77.71 77.33 76.75 Final Test Mode: According to ANSI C63.4 standards, the test results are both the "worst case" and "worst setup": X axis (see the test setup photo) 5.4 Description of Support Units N/A Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B—C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bac‘an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 5 of 24

Report No: CCISE180411901 5.5 Laboratory Facility The test facility is recognized, certified, or accredited by the following organizations:  FCC - Registration No.: 727551 Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been accredited as a testing laboratory by FCC (Federal Communications Commission). The Registration No. is 727551.  IC - Registration No.: 10106A-1 The 3m Semi-anechoic chamber of Shenzhen Zhongjian Nanfang Testing Co., Ltd. has been Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 10106A-1.  CNAS - Registration No.: CNAS L6048 Shenzhen Zhongjian Nanfang Testing Co., Ltd. is accredited to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration laboratories for the competence of testing. The Registration No. is CNAS L6048.  A2LA - Registration No.: 4346.01 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. The test scope can be found as below link: https://portal.a2la.org/scopepdf/4346-01.pdf 5.6 Laboratory Location Shenzhen Zhongjian Nanfang Testing Co., Ltd. Address: No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Email: info@ccis-cb.com, Website: http://www.ccis-cb.com 5.7 Measurement Uncertainty Items Expanded Uncertainty (Confidence of 95%) Conducted Emission (9kHz ~ 30MHz) 2.14 dB (k=2) Radiated Emission (9kHz ~ 30MHz) 4.24 dB (k=2) Radiated Emission (30MHz ~ 1000MHz) 4.35 dB (k=2) Radiated Emission (1GHz ~ 18GHz) 4.44 dB (k=2) Radiated Emission (18GHz ~ 26.5GHz) 4.56 dB (k=2) 5.8 Test Instruments list Cal. Date Cal. Due date Test Equipment Manufacturer Model No. Inventory No. (mm-dd-yy) (mm-dd-yy) EMI Test Receiver Rohde & Schwarz ESCI CCIS0002 03-07-2018 03-06-2019 SCHWARZBECK BiConiLog Antenna VULB9163 CCIS0005 03-07-2018 03-06-2019 MESS-ELEKTRONIK Double-ridged waveguide SCHWARZBECK BBHA9120D CCIS0006 03-07-2018 03-06-2019 horn antenna MESS-ELEKTRONIK Amplifier HP 8447D CCIS0003 03-07-2018 03-06-2019 (10kHz-1.3GHz) Amplifier Compliance Direction PAP-1G18 CCIS0011 03-07-2018 03-06-2019 (1GHz-18GHz) Systems Inc. Spectrum analyzer Rohde & Schwarz FSP CCIS0023 03-07-2018 03-06-2019 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 6 of 24

Report No: CCISE180411901 6 Test results and Measurement Data 6.1 Antenna requirement Standard requirement: FCC Part15 C Section 15.203 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. E.U.T Antenna: The EUT make use of an PCB antenna, The typical gain of the antenna is 0dBi. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 7 of 24

Report No: CCISE180411901 6.2 Radiated Emission Test Requirement: FCC Part15 C Section 15.231(a) and 15.209 Test Method: ANSI C63.4:2014 Test Frequency Range: 30MHz to 5000MHz Test site: Measurement Distance: 3m (Semi-Anechoic Chamber) Receiver setup: Frequency Detector RBW VBW Remark 30MHz-1GHz Quasi-peak 120kHz 300kHz Quasi-peak Value Above 1GHz Peak 1MHz 3MHz Peak Value Limit: Frequency Limit (dBuV/m @3m) Remark (Field strength of the 80.82 Average Value fundamental signal) 433.92MHz 100.82 Peak Value Limit: Frequency Limit (dBuV/m @3m) Remark (Spurious Emissions) 30MHz-88MHz 40.0 Quasi-peak Value 88MHz-216MHz 43.5 Quasi-peak Value 216MHz-960MHz 46.0 Quasi-peak Value 960MHz-1GHz 54.0 Quasi-peak Value 54.0 Average Value Above 1GHz 74.0 Peak Value Or The maximum permitted unwanted emission level is 20 dB below the maximum permitted fundamental level whichever limit permits higher field strength. Test Procedure: a. The EUT was placed on the top of a rotating table 0.8m(below 1GHz) /1.5m(above 1GHz) above the ground at a 3 meter chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi- peak or average method as specified and then reported in a data sheet. Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 8 of 24

Report No: CCISE180411901 Test setup: Below 1GHz Above 1GHz Test Instruments: Refer to section 5.7 for details Test mode: Refer to section 5.3 for details Test results: Pass Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 9 of 24

Report No: CCISE180411901 6.2.1 Field Strength Of The Fundamental Signal Peak value Read Antenna Frequency Cable Loss Level AV Limit Over Limit Level Factor Polarization (MHz) (dB) (dBuV/m) (dBuV/m) (dB) (dBuV) (dB/m) 433.92 59.62 15.6 3.16 78.38 80.83 -2.45 Vertical 433.92 48.98 15.6 3.16 67.74 80.83 -13.09 Horizontoal Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 10 of 24

Report No: CCISE180411901 T on time slot-1: T on time slot-2 RBW 1 MHz Delta 1 [T1 ] RBW 1 MHz * VBW 1 MHz -0.30 dB * VBW 1 MHz Ref 0 dBm * Att 10 dB SWT 1 s 260.000000 ms Ref 0 dBm * Att 10 dB SWT 100 ms 0 Marker 1 [T1 ] 0 -75.26 dBm 414.000000 ms A A -10 -10 SGL SGL 1 PK 1 PK MAXH MAXH -20 -20 -30 -30 -40 -40 -50 -50 3DB 3DB -60 AC -60 AC -70 -70 1 1 -80 -80 -90 -90 -100 -100 Center 433.92 MHz 100 ms/ Center 433.92 MHz 10 ms/ Date: 7.MAY.2018 20:07:15 Date: 7.MAY.2018 20:07:51 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 11 of 24

Report No: CCISE180411901 6.2.2 Spurious Emissions Below 1GHz (30MHz-1000MHz) Read Antenna Cable Over Frequency Level Limit Line Level Factor Loss Limit Detector polarization (MHz) (dBuV/m) (dBuV/m) (dBuV/m) (dB/m) (dB) (dB) 867.84 36.62 20.6 4.01 61.23 80.83 -19.60 QP Vertical 867.84 38.98 20.6 4.01 63.59 80.83 -17.24 QP Horizontal Above 1GHz Peak value Read Antenna Cable Aux Preamp AV Frequency Factor Level Level Factor Loss Factor Limit polarization (MHz) (dBuV/m) (dBuV/m) (dB/m) (dB) (dB) (dB) (dBuV/m) 1301.76 66.32 24.20 3.47 2.42 41.04 55.37 60.82 Vertical 1735.68 65.45 25.00 4.03 2.32 41.14 55.66 60.82 Vertical 2169.60 57.86 24.91 4.48 2.67 41.68 48.24 60.82 Vertical 2603.52 54.62 26.00 4.95 2.86 41.88 46.55 60.82 Vertical 3037.44 56.34 27.22 5.36 2.91 41.49 50.34 60.82 Vertical 1301.76 59.67 24.20 3.47 2.42 41.04 48.72 60.82 Horizontal 1735.68 70.23 25.00 4.03 2.32 41.41 60.17 60.82 Horizontal 2169.60 53.62 24.91 4.48 2.67 41.68 44.00 60.82 Horizontal 2603.52 54.79 26.00 4.95 2.86 41.88 46.72 60.82 Horizontal 3037.44 53.23 27.22 5.36 2.91 41.49 47.23 60.82 Horizontal Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 12 of 24

Report No: CCISE180411901 6.3 20dB Bandwidth Test Requirement: FCC Part15 C Section 15.231 (c) Test Method: ANSI C63.4:2014 Receiver setup: RBW=1kHz, VBW=3kHz, detector: Peak Limit: The bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices operating above 70 MHz and below 900 MHz. For devices operating above 900 MHz, the emission shall be no wider than 0.5% of the center frequency. Bandwidth is determined at the points 20 dB down from the modulated carrier. Test Procedure: 1. According to the follow Test-setup, keep the relative position between the artificial antenna and the EUT. 2. Set the EUT to proper test channel. 3. Max hold the radiated emissions, mark the peak power frequency point and the -20dB upper and lower frequency points. 4. Read 20dB bandwidth. Test setup: Test Instruments: Refer to section 5.7 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data 20dB bandwidth (MHz) Limit (MHz) Results 0.102 1.0848 Passed Note: Limit= Fundamental frequency×0.25%=433.92×0.25%=1.0848MHz Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 13 of 24

Report No: CCISE180411901 Test plot as follows: * RBW 1 kHz Delta 1 [T1 ] * VBW 3 kHz 2.49 dB Ref 0 dBm * Att 10 dB SWT 500 ms 102.000000000 kHz 0 Marker 1 [T1 ] -40.46 dBm 433.827000000 MHz A -10 1 PK D1 -17.29 dBm MAXH -20 -30 1 D2 -37.29 dBm 1 -40 -50 3DB -60 AC -70 -80 -90 -100 Center 433.92 MHz 50 kHz/ Span 500 kHz Date: 7.MAY.2018 17:48:31 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 14 of 24

Report No: CCISE180411901 6.4 Duration Time Test Requirement: FCC Part15 C Section 15.231 (a) Test Method: ANSI C63.10: 2013 Receiver setup: RBW=100kHz, VBW=300kHz, span=0Hz, detector: Peak Limit: Not more than 5 seconds Test mode: Transmitting mode Test Procedure: 1. According to the follow Test-setup, keep the relative position between the artificial antenna and the EUT. 2. Set the EUT to proper test channel. 3. Single scan the transmission, and read the transmission time. Test setup: Test Instruments: Refer to section 5.8 for details Test mode: Refer to section 5.3 for details Test results: Passed Measurement Data Duration time (second) Limit (second) Result 0.288 <5.0 Pass Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 15 of 24

Report No: CCISE180411901 Test plot as follows: RBW 100 kHz Delta 2 [T1 ] * VBW 300 kHz 0.89 dB Ref 0 dBm * Att 10 dB SWT 8 s 5.000000 s 0 Marker 1 [T1 ] -70.97 dBm 784.000000 ms A -10 SGL Delta 1 [T1 ] 1 PK 0.74 dB MAXH -20 288.000000 ms -30 -40 -50 3DB -60 AC 1 1 2 -70 -80 -90 -100 Center 433.92 MHz 800 ms/ Date: 7.MAY.2018 16:51:29 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE1804119 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 16 of 24


Document Created: 2018-05-27 14:14:12
Document Modified: 2018-05-27 14:14:12
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC