User_Manual

FCC ID: 2AORE-X8

Users Manual

Download: PDF
FCCID_3934007

Flydigi X8 Pro Wireless Controller User Manual Model No.: FeiZhi X8 Pro FCC ID: 2AORE-X8



3. Controller Mode Bluetooth Mode Hold and press B+Logo buttons for 5 seconds Wireless Android Mode Mode Hold and press A+Logo buttons for 5 seconds Xinput Mode Hold and press X+Logo buttons for 5 seconds 2.4G Wireless Connection Method Bluetooth System Android Supported Cellphone/Tablets Device Supported TV/Set-top Box/PC Air Mouse Experience Motion Sensing Supported Authentic Vibration Upgrade Firmware Upgrade Supported Note: For mobile games, select Bluetooth mode to play on the cellphone; For playing Android mobile games on computer simulator, select wireless Android mode; For computer games, select Xinput mode.

4. Play Games on Android Cellphone and Tablet (Bluetooth Mode) 1. Download Flydigi Gamepad Assistant Scan QR code to download and install 2. Connect Controller Step 1: Turn on power, press and hold Logo button for 5 seconds, then controller goes into pairing mode (White Logo light flashing). If the light is not white at this time, press and hold B+Logo buttons in sequence for 5 seconds, then it will be switched back to Bluetooth mode. Press and hold for 5 seconds Step 2: Click Settings – Bluetooth on the cellphone , turn on Bluetooth, click on FeizhiX8 / X8 Pro of the search result and start pairing with cellphone, after pairing is successful, white Logo light stays steadily on. Note: For paired controller , it’s only necessary to press Logo button when re- connecting next time, not need to hold. Click

3. Activate Button Mapping Flydigi Utool is a tool custom—designed for Android cellphone and tablet specifically to turn on button mapping services, it‘s root—free and no need for computer. Power port [5V USB power supply) Power Iigh’r,_\ State light ———3° Data port——~— (connect with phone\tablet] Y \« 3.1 Open Flydigi Gamepad Assistant, click Settings—Enable USB Debug 9:00 PM c Eo 9:00 PM Flydigi Gamepad Assistant C Settings 0 . [«\ Controller connected & Help for Connection Rule the game E Buy Now KeyMapping Disabled esn ; Enable to use controller vgfl Enable USB Debug } Jump into developer options H.} Cancal Button Mapping Service Mobile Game Controller Transform Your Gaming Experience Anywhere G Check for Updates nal Competition ) About Flydigi Gamepad Assistant My Games Lauch here to play games with controller

3.2 Connect Utool in sequence following 1-5 as shown in the figure, red light stays steadily on. 1 Cellphone 2 Data cable 5 3 Flydigi Utool 4 Charging plug 5 Socket 4 3 2 1 3.3 Allow USB debugging on the cellphone, click OK. 3.4 After completing activation, unplug the Flydigi Utool.

5. Play Games on Set-Top Box / Smart TV or PC Android Simulator (Wireless Android Mode) Set-Top Box/Smart TV (TV Game) 1.Search TV app market and install in the TV browser. 2.Download games in the app market and install. 3.Plug receiver into the USB port of set-top box/smart TV. 4.Turn on power of controller, press and hold the A+Logo buttons in sequence for 5 seconds, the controller will be switched to wireless Android mode (Yellow Logo light stays steadily on). The controller will connect to receiver. A + Press and hold A + Logo for 5 seconds Note: If yellow Logo light keeps flashing slowly and unable to connect after switching to wireless Android mode, the controller needs to be paired to the receiver: 1. First ensure that you have switched to yellow light mode. 2. Restart controller, press and hold Logo button for 5 seconds, the light will flash quickly and the controller will enter pairing mode. Plug and unplug the receiver once and keep the controller within 20cm from the receiver. If yellow Logo light flashes slowly twice, then stays steadily on, it indicates successful pairing. 5. If the controller is not used for a period of time, it will enter standby mode, press the Logo button again to turn it on. Air Mouse Function (Only Supports Wireless Android Mode) Air Mouse is a unique function of Flydigi controller that can utilize controller to simulate mouse operation, to facilitate users to click like a mouse anywhere as you wish. After yellow Logo light stays steadily on, press Logo button to turn on / off Air Mouse function. After it’s turned on, LT will be left mouse button.

Note: Use center point of controller as the axis, rotate it up and down and side to side, so you can control the Air Mouse pointer movement. 6. Play Games on Computer (Xinput Mode) PC games can support controller without driver. 1. Plug receiver into computer USB port. 2. Turn on power of controller, press and hold the X+Logo buttons in sequence for 5 seconds, the controller will be switched to Xinput mode (Blue Logo light stays steadily on). The controller will connect to receiver. X + Press and hold X+Logo buttons for 5 seconds Note: If Blue Logo light keeps flashing slowly and unable to connect after switching to Xinput mode, the controller needs to be paired to the receiver: 1. First ensure that you have switched to blue light mode. 2. Restart controller, press and hold Logo button for 5 seconds, the light will flash quickly and the controller will enter pairing mode. Plug and unplug the receiver once and keep the controller within 20cm from the receiver. If blue Logo light flashes slowly twice, then stays steadily on, it indicates successful pairing. 3. If the controller is not used for a period of time, it will enter standby mode, press the Logo button again to turn it on.

7. FAQ 1 Light of controller is off First turn on the power switch and check whether the power is sufficient. If there is electricity but Logo light is still off, please contact customer service. 2 Problem with joystick and button Controller testing can be done in the Gamepad Assistant. Joystick calibration: Press and hold menu + back buttons of the controller at the same time, Logo light flashes slowly twice to complete calibration. Shooting center will automatically drift if motion sensing of 3 controller is used in shooting games If view angle cannot be controlled after pressing and holding the LB button and swinging controller, please leave it on the desk for 10 seconds. 4 What if Utool activation is not successful? 1.The red light is flashing all the time: There may be a problem with data cable or USB port of the cellphone. Please change and try again (Some data cables can charge but cannot transmit data.) 2.Blue light is always flashing quickly or it is not on: Make sure USB debugging is enabled and click OK in the popup box "Allow USB debugging"; Unplug and plug in USB debugging data cable and try again. 3.Still unable to activate after red and blue lights are steadily on: Please restart the cellphone, wait a few minutes to try again. 4.Blue light is flashing slowly: You may have not installed Flydigi Gamepad Assistant, please return to the first step to install the App.

8. Performance Parameter Cellphone and tablet with OS of Android Android 4.4 or above and Bluetooth Platform 4.0 Supported PC Windows XP and above version OS Wireless RF 2.4-2.483GHz, Bluetooth 4.0 BLE Usage >10m Distance Product Size 155.5x103.5x64.5mm Operating current <4mA, after Bluetooth enabling motion sensing, operating Mode current <8mA; standby current <15uA Operating Wireless Current Operating current<8mA, standby Android current<15uA Mode Operating current<8mA, standby Xinput Mode current<15uA Rated Input Charging Voltage: 5V. Charging current: <120mA 80 hours under Bluetooth mode (motion sensing not Working enabled) Hours 40 hours under wireless Android mode/Xinput mode Storage -20℃~+80℃ Temperature Working -5℃~+50℃ Temperature

UM7104 Shanghai Flydigi Electronics Technology Co.,Ltd. www.flydigi.com/en

* e Federal Communication Commission (FCC) Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Poweris so low that no RF exposure calculation is needed. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user‘s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no quarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.


Document Created: 2018-03-29 10:05:37
Document Modified: 2018-03-29 10:05:37
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC