user manual

FCC ID: 2AORE-WEE

Users Manual

Download: PDF
FCCID_3805744

2: 8: 2( 8(

Use of silicone pads UM6009 3.FAQ What does the silicone pads do? a) The indicator of the controller is not on: Check to see if the controller is switched on. If so, please charge the battery. Some On/Off on the cellphone is above the screen, landscape mode can cause b) Blue light keeps flashing slowly the slot touching the ON/OFF button, which can lead to items not normally used. Slow flashing blue light indicates that the controller is searching for device which was However, those ON/OFF button on the side will not need this pad. paired before. If this continues for too long, please hold and press the Logo button for 3 seconds until the light goes off, then start pairing process again by holding the How to use silicone pads to avoid the ON/OFF button getting stuck? Logo key. c) Joystick does not work properly As shown below, it has glue on the two pads,you can tear and glue them on the Joystick data calibration: Press START+SELECT simultaneously for 2 seconds until the corresponding area which can avoid ON/OFF button. blue light flashes twice. The thickness of the silicone pad can keep the ON/OFF button away from the slot and can play a good non-skid effect. 4.Specifications Wee Mobile Game Controller Cellphones or tablets with OS of Supported Platform Android User Manual Android 4.4 or above and Bluetooth 4.0 Wireless Frequency 2.4GHz-2.4GHz (Bluetooth 4.0 BLE) Silicone pad 1 Power Consumption Working Mode<4mA, Standby Mode<4uA Model No.: Wee ON/OFF button FCC ID: 2AORE-WEE Transmission Distance >10m, disregard of any obstacle, Battery Capacity 300mAh lithium battery Working Hours 80 hours Shanghai Flydigi Electronics Technology Co.,Ltd. Silicone pad 2 www.flydigi.com/en Rated Voltage 4.2V Rated Output 5V-100mA Charging Time 3-4 hours

YR F€E Federal Communication Commission (FCC) Radiation Exposure Statement The device has beenevaluated to meet general RF exposure requirement The devce ean bused in portable erposurecondiion withoutresicton Federal Communicaton Commission (FCC) Radiaton Exposure Statement Poveris solow that noRF exposire calculaton is needed Thisdevicecomples withpart 18ofthe FCC rules. Operation is subject o thefolowing wo conditons (1) this device may not cause hamuiterlrenceand (2) thsdevice mustacceptany interference receved.including nteference that may cause undesired eperaton NOTE:The manutactieris not responsiblfor anyrado orTV intererence caused by unauthorized modifcations ochanges o this eqvipment Such modifeations ochanges could vaid heuser‘s authorty t opecte the equioment NOTE:Thiseavioment has beentestedand found to comply with the ImtsfoaClass 8 diatal device,pursuant o part 15 othe FCC Rules, Theselmits re designed to rovide reasonable protecton againt harmulinterfrencein a residentalinstalaton. This eqsiement generates uses and canradate raciorequency energy andi not nstaled and used in accordance wih th instructions, may cause harmfnteference o racio communicatons, Howevesthere is no guarantee that interfrence wilnot occuin a pariculrinstalaton. Ifthis equipment does cause harmfut interfrence to raio or teleiion receio, which can be deternined by uring the eauioment of and on the useris encouraged o ty tcortectth interference by one ormoreofthe oloving messures —Reotlento elocate thereceving antemns «Increase the separatonbetween the exvioment and receiver — Connecttequipmentintoan outetona crout iferent rom thatto whichtherecever is comected — Consut he deaeror an experienced radioTV technicianfohelp


Document Created: 2018-04-03 09:30:51
Document Modified: 2018-04-03 09:30:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC