RF exposure report

FCC ID: 2AOR7-TABLO400

RF Exposure Info

Download: PDF

FCCID_4211052

SAR evaluation

MPE Calculation Method
0.5
E (V/m) = (30*P*G) /d
Power Density: Pd (W/m2) = E2/377
E = Electric Field (V/m)
P = Peak RF output Power (W)
G = EUT Antenna numeric gain (numeric)
d = Separation distance between radiator and human body (m)
The formula can be changed to
Pd = (30*P*G) / (377*d2)
From the peak EUT RF output power, the minimum mobile separation distance,
d=0.2m, as well
as the gain of the used antenna, the RF power density can be obtained.

Calculated Result and Limit (WORSE CASE IS AS BELOW)
Wifi：
Directional Peak Output Power Density Limit of Power Test
AntennaGain Power (mW) (S)(mW/cm2) Density (S) Result
(Numeric) (mW/cm2)

4（6dBi） 156.315 0.124 1 Compiles
（21.94dBm@2437MHz）

UNII：
Directional Peak Output Power Density Limit of Power Test
AntennaGain Power (mW) (S)(mW/cm2) Density (S) Result
(Numeric) (mW/cm2)

4（6dBi） 81.10 0.065 1 Compiles
（19.09dBm@5825MHz）

Document Created: 2019-03-22 19:17:41
Document Modified: 2019-03-22 19:17:41

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC