RF Test Report-1

FCC ID: 2AOPD-UT10

Test Report

Download: PDF
FCCID_4214143

ISSUED BY ‘ Shenzhen BALUN Technology Co., Ltd. Lm } | FOR Rugged Smart Phone ISSUED TO Shenzhen UniStrong Science & Technology Co.,Ltd. B,4—4Factory, Zhengcheng Road, FuyongBaoan District, Shenzhen, China Clomnmonnt RCGjelelgi y[ee BL—EC1930222—501 SUAENEIuC® Rugged Smart Phone \M[elelGNyEIn® UT12 Brand Name: MW§Thsyi(gelple JC@SseplbElreh 47 CFR Part 2 (10—1—17 Edition) RSS—Gen (Issue 5, April 2018) (Others refer to chapter 3.1) geelpy 2A0OPD—UT1O oS DM yV eSm 11546A—UT1O ‘EnGineer) Test Conclusion: NSEES [ DEicCH® Mar. 11, 2019 Date of Issue: ME ols NOTE: This test report of test results only related to testing samples, which can be duplicated completely for the legal use with the approval of the applicant; it shall not be reproduced except in full, without the written approval of Shenzhen BALUN Technology Co., Ltd. Any objections should be raised within thirty days from the date of issue. To validate the report, please contact us. Block B, 1st FL,Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong, P. R. China 518055 TEL: +86—755—66850100, FAX: +86—755—61824271 www.baluntek.com

Report No.: BL-EC1930222-501 Revision History Version Issue Date Revisions Content Rev. 01 Mar. 15, 2019 Initial Issue TABLE OF CONTENTS 1 ADMINISTRATIVE DATA (GENERAL INFORMATION) ........................................................................ 4 1.1 Identification of the Testing Laboratory ............................................................................................ 4 1.2 Identification of the Responsible Testing Location ........................................................................... 4 1.3 Laboratory Condition ....................................................................................................................... 4 1.4 Announce ........................................................................................................................................ 5 2 PRODUCT INFORMATION ................................................................................................................... 6 2.1 Applicant Information....................................................................................................................... 6 2.2 Manufacturer Information ................................................................................................................ 6 2.3 Factory Information ......................................................................................................................... 6 2.4 General Description for Equipment under Test (EUT) ..................................................................... 6 2.5 Ancillary Equipment......................................................................................................................... 7 2.6 Technical Information ...................................................................................................................... 8 3 SUMMARY OF TEST RESULTS ......................................................................................................... 10 3.1 Test Standards .............................................................................................................................. 10 3.2 Test Verdict ................................................................................................................................... 11 4 GENERAL TEST CONFIGURATIONS ................................................................................................ 12 4.1 Test Environments ........................................................................................................................ 12 4.2 Test Equipment List....................................................................................................................... 12 4.3 Test Configurations ....................................................................................................................... 14 4.4 Test Setup ..................................................................................................................................... 17 5 TEST ITEMS ....................................................................................................................................... 19 5.1 Field Strength of Spurious Radiation ............................................................................................. 19 ANNEX A TEST RESULTS ..................................................................................................................... 23 A.1 Field Strength of Spurious Radiation ............................................................................................. 23 ANNEX B TEST SETUP PHOTOS ......................................................................................................... 24 2/ 24

Report No.: BL-EC1930222-501 ANNEX C EUT EXTERNAL PHOTOS .................................................................................................... 24 ANNEX D EUT INTERNAL PHOTOS ...................................................................................................... 24 3/ 24

Report No.: BL-EC1930222-501 1 ADMINISTRATIVE DATA (GENERAL INFORMATION) 1.1 Identification of the Testing Laboratory Company Name Shenzhen BALUN Technology Co., Ltd. Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road, Address Nanshan District, Shenzhen, Guangdong Province, P. R. China. Phone Number +86 755 6685 0100 1.2 Identification of the Responsible Testing Location Test Location Shenzhen BALUN Technology Co., Ltd. Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road, Address Nanshan District, Shenzhen, Guangdong Province, P. R. China. The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 11524A-1. The laboratory is a testing organization accredited by FCC as an accredited testing laboratory. The designation number is CN1196. Accreditation Certificate The laboratory is a testing organization accredited by American Association for Laboratory Accreditation(A2LA) according to ISO/IEC 17025. The accreditation certificate number is 4344.01. The laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L6791. All measurement facilities used to collect the measurement data are located at Block B, FL 1, Baisha Science and Technology Park, Shahe Description Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 518055 1.3 Laboratory Condition Ambient Temperature 20 °C to 35 °C Ambient Relative 30 % to 60 % Humidity Ambient Pressure 98 kPa to 102 kPa 4/ 24

Report No.: BL-EC1930222-501 1.4 Announce (1) The test report reference to the report template version v1.3. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. (3) The test report is invalid if there is any evidence and/or falsification. (4) The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. (5) This document may not be altered or revised in any way unless done so by BALUN and all revisions are duly noted in the revisions section. (6) Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. 5/ 24

Report No.: BL-EC1930222-501 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Shenzhen UniStrong Science & Technology Co.,Ltd. B,4-4Factory, Zhengcheng Road, FuyongBaoan District, Shenzhen, Address China 2.2 Manufacturer Information Manufacturer Shenzhen UniStrong Science & Technology Co.,Ltd. B,4-4Factory, Zhengcheng Road, FuyongBaoan District, Shenzhen, Address China 2.3 Factory Information Factory N/A Address N/A 2.4 General Description for Equipment under Test (EUT) EUT Name Rugged Smart Phone Model Name Under Test UT12 Series Model Name N/A Description of Model N/A name differentiation Hardware Version N/A Software Version N/A Dimensions (Approx.) N/A Weight (Approx.) N/A 6/ 24

Report No.: BL-EC1930222-501 2.5 Ancillary Equipment Battery Brand Name SJYEnergy Model No. BA7800 Ancillary Equipment 1 Serial No. N/A Capacity 8000 mAh Rated Voltage 3.8 V Limit Charge Voltage 4.35 V Adapter Brand Name N/A Model No. ASUC71W Ancillary Equipment 2 Serial No. N/A Rated Input 100-240 V , 0.7 A, 50/60 Hz Rated Output 5V 3A USB Cable Ancillary Equipment 3 Model No. N/A Length (Approx.) 1.0 m 7/ 24

Report No.: BL-EC1930222-501 2.6 Technical Information GSM/GPRS/EGPRS 850/900/1800/1900 MHz; CDMA Band Class 0; All Network and EVDO Rel. 0/Rev. A Band Class 0; Wireless connectivity WCDMA/HSDPA/HSUPA Band 1/2/5/8; for EUT LTE FDD Band 1/2/3/4/5/7/8/17/20/28; LTE TDD Band 38/40/41; Bluetooth, GPS, GLONASS, NFC, BDS The equipment is Smart Phone, intended for used with information About the Product technology equipment. Note 1: The EUT is a smart phone, supporting dual SIM card slots under the same transceiver. Both SIM card slots support GSM, WCDMA and LTE. And both SIM card slots share the same transceiver, so only SIM1 is tested in this report. The requirement for the following technical information of the EUT was tested in this report: GSM/GPRS/EGPRS 850/1900 CDMA Band Class 0 EVDO Rel. 0/Rev. A Band Class 0 Operating Bands WCDMA/HSDPA/HSUPA Band 2/5 LTE FDD Band 2/4/5/7/17 LTE TDD Band 41 GSM/GPRS GMSK EGPRS 8PSK CDMA 1x O-QPSK, H-PSK, QPSK EVDO QPSK, 8PSK, 16-QAM Modulation Type WCDMA QPSK HSDPA QPSK /HSUPA 16QAM QPSK LTE 16QAM GSM/GPRS/EGPRS 850: 824 MHz ~ 849 MHz GSM/GPRS/EGPRS 1900: 1850 MHz ~ 1910 MHz CDMA/EVDO BC 0: 824.025 MHz ~ 848.985 MHz WCDMA/HSDPA/HSUPA Band 2: 1850 MHz ~ 1910 MHz WCDMA/HSDPA/HSUPA Band 5: 824 MHz ~ 849 MHz TX Frequency Range FDD LTE Band 2: 1850 MHz ~ 1910 MHz FDD LTE Band 4: 1710 MHz ~ 1755 MHz FDD LTE Band 5: 824 MHz ~ 849 MHz FDD LTE Band 7: 2500 MHz ~ 2570 MHz FDD LTE Band 17: 704 MHz ~ 716 MHz TDD LTE Band 41: 2555 MHz - 2655 MHz Rx Frequency Range GSM/GPRS/EGPRS 850: 869 MHz ~ 894 MHz 8/ 24

Report No.: BL-EC1930222-501 GSM/GPRS/EGPRS 1900: 1930 MHz ~ 1990 MHz CDMA/EVDO BC 0: 869.025 MHz ~ 893.985 MHz WCDMA/HSDPA/HSUPA Band 2: 1930 MHz ~ 1990 MHz WCDMA/HSDPA/HSUPA Band 5: 869 MHz ~ 894 MHz FDD LTE Band 2: 1930 MHz ~ 1990 MHz FDD LTE Band 4: 2110 MHz ~ 2155 MHz FDD LTE Band 5: 869 MHz ~ 894 MHz FDD LTE Band 7: 2620 MHz ~ 2690 MHz FDD LTE Band 17: 734 MHz ~ 746 MHz TDD LTE Band 41: 2555 MHz - 2655 MHz GSM/GPRS 850: 4 GSM/GPRS 1900: 1 EGPRS 850/1900: E2 CDMA/EVDO BC 0: 3 WCDMA/HSDPA/HSUPA Band 2: 3 WCDMA/HSDPA/HSUPA Band 5: 3 Power Class FDD LTE Band 2: 3 FDD LTE Band 4: 3 FDD LTE Band 5: 3 FDD LTE Band 7: 3 FDD LTE Band 17: 3 TDD LTE Band 41: 3 Multislot Class GPRS/EGPRS: 12 Antenna Type PIFA Antenna GSM/GPRS/EGPRS 850: -1.4 dBi GSM/GPRS/EGPRS 1900: 0.13 dBi CDMA/EVDO BC0: -0.89 dBi WCDMA/HSDPA/HSUPA Band 2: 0.13 dBi WCDMA/HSDPA/HSUPA Band 5: -1.4 dBi Antenna Gain FDD LTE Band 2: -0.17 dBi FDD LTE Band 4: -0.12 dBi FDD LTE Band 5: -0.16 dBi FDD LTE Band 7: -0.45 dBi FDD LTE Band 17: -1.23 dBi TDD LTE Band 41: 0.42 dBi Note 1: The EUT information are declared by manufacturer. For more detailed features description, please refer to the manufacturer's specifications or user's manual. 9/ 24

Report No.: BL-EC1930222-501 3 SUMMARY OF TEST RESULTS 3.1 Test Standards No. Identity Document Title 47 CFR Part 2 Frequency Allocations and Radio Treaty Matters; 1 (10-1-17 Edition) General Rules and Regulations 47 CFR Part 22 2 Subpart H Cellular Radiotelephone Service (10-1-17 Edition) 47 CFR Part 24 3 Subpart E Broadband PCS (10-1-17 Edition) 47 CFR Part 27 4 Miscellaneous Wireless Communications Services (10-1-17 Edition) RSS-Gen Issue5 General Requirements and Information for the Certification of 5 (April 2018) Radio Apparatus RSS-130 Issue2 Equipment Operating in the Frequency Bands 617-652 MHz, 6 (February 2019) 663-698 MHz, 698-756 MHz and 777-787 MHz RSS-132 Issue3 Cellular Telephone Systems Operating in the Bands 824-849 7 (January 2013) MHz and 869-894 MHz RSS-133 Issue6 8 2 GHz Personal Communications Services (January 2018) RSS-139 Issue3 Advanced Wireless Services (AWS) Equipment Operating in 9 (July 2015) the Bands 1710-1780 MHz and 2110-2180 MHz RSS-199 Issue3 Broadband Radio Service (BRS) Equipment Operating in the 10 (December 2016) Band 2500-2690 MHz Land Mobile FM or PM Communications Equipment 11 ANSI/TIA-603-E-2016 Measurement and Performance Standards KDB 971168 Measurement Guidance for Certification of Licensed Digital 12 D01 v03r01 Transmitters 10/ 24

Report No.: BL-EC1930222-501 3.2 Test Verdict No. Description FCC Part No. ISED Part No. Test Result Verdict RSS-Gen 6.13 2.1053 RSS-130 4.7 Field Strength of Spurious 22.917 RSS-132 5.5 1 ANNEX A.1 Pass Radiation 24.238 RSS-133 6.5 27.53 RSS-139 6.6 RSS-199 4.5 Note 1: FCC Class II Permissive Change New Model: Turn off the WIFI function of 2.4GHz and 5GHz by blocking the software and remove the underlying WIFI driver of android. The other transmitter module itself has not changed. Note 2: Only the worst test mode were recorded in this report. 11/ 24

Report No.: BL-EC1930222-501 4 GENERAL TEST CONFIGURATIONS 4.1 Test Environments During the measurement, the environmental conditions were within the listed ranges: NV (Normal Voltage) 3.8 V Test Voltage of the EUT LV (Low Voltage) 3.7 V HV (High Voltage) 4.35 V NT (Normal Temperature) +25 °C Test Temperature of the EUT LT (Low Temperature) -20 °C HT (High Temperature) +45 °C 4.2 Test Equipment List Software Description Manufacturer Model Serial No. /Firmware Cal. Date Cal. Due Version Conducted Test System Test Software 1 R&S CMUgo N/A V2.0.1 N/A N/A Test Software 2 R&S CMWRun N/A V1.8.9 N/A N/A V2.1.1.38 Test Software 3 BALUN BL410R N/A N/A N/A 4 Universal Radio Communication R&S CMU 200 119280 V5.13 2019.02.28 2020.02.27 Tester Wideband Radio Communication R&S CMW 500 127794 V3.5.137 2018.06.15 2019.06.14 Tester Wideband Radio Communication R&S CMW 500 120598 V3.5.137 2019.02.28 2020.02.27 Tester Spectrum Analyzer R&S FSV-30 103118 2.30.SP1 2018.06.15 2019.06.14 Spectrum Analyzer Agilent E4440A MY45304434 A.11.21 2018.11.01 2019.10.31 Spectrum Analyzer Agilent E4440A MY46181663 A.11.21 2018.11.01 2019.10.31 Temperature AHK SP20 1412 N/A 2018.06.15 2019.06.14 Chamber 6000140106 DC Power Supply ITECH IT6863A N/A 2018.06.14 2019.06.13 87210020 E9304A Power Sensor Agilent MY41497164 N/A 2018.11.01 2019.10.31 H18 DCPD- Power Splitter KMW 1305003215 N/A N/A N/A LDC Attenuator (20 dB) KMW ZA-S1-201 110617091 N/A N/A N/A Attenuator (6 dB) KMW ZA-S1-61 1305003189 N/A N/A N/A 12/ 24

Report No.: BL-EC1930222-501 Software Description Manufacturer Model Serial No. /Firmware Cal. Date Cal. Due Version Radiated Test System Test Software BALUN BL410_E N/A V16.921 N/A N/A Test Antenna- VULB Bi-Log Schwarzbeck 9163-624 N/A 2017.07.22 2019.07.21 9163 (30 MHz-3 GHz) Test Antenna- BBHA Schwarzbeck 9120D-1600 N/A 2018.07.11 2020.07.10 Horn(1-18 GHz) 9120D Test Antenna- LB- A-INFO J211060273 N/A 2019.01.05 2021.01.04 Horn(18-40 GHz) 180400KF Anechoic Chamber RAINFORD 9m*6m*6m N/A N/A 2017.02.21 2020.02.20 CN- Shielded Enclosure ChangNing 130703 N/A N/A N/A 130701 EMI Receiver KEYSIGHT N9038A MY53220118 A.14.16 2018.11.07 2019.11.06 Spectrum Analyzer R&S FSV-30 103118 2.30.SP1 2018.06.15 2019.06.14 Wideband Radio Communication R&S CMW 500 121551 V3.2.73 2018.05.07 2019.05.06 Tester 13/ 24

Report No.: BL-EC1930222-501 4.3 Test Configurations Test Channel Test Items Test Mode LCH MCH HCH GSM 850 v -- -- Field Strength of Spurious GSM 1900 -- -- v Radiation CDMA BC 0 v -- -- WCDMA Band 5 -- v -- Note 1: The mark “v” means that this configuration is chosen for testing. UL Frequency Test Mode UL Channel UL Channel No. (MHz) Low Channel 128 824.2 GSM/GPRS/EGPRS 850 Middle Channel 190 836.6 High Channel 251 848.8 Low Channel 512 1850.2 GSM/GPRS/EGPRS 1900 Middle Channel 661 1880.0 High Channel 810 1909.8 Low Channel 1013 824.70 CDMA/EVDO BC 0 Middle Channel 384 836.52 High Channel 777 848.31 Low Channel 9262 1852.4 WCDMA Band 2 Middle Channel 9400 1880.0 High Channel 9538 1907.6 Low Channel 4132 826.4 WCDMA Band 5 Middle Channel 4182 836.4 High Channel 4233 846.6 LTE Bandwidth (MHz) Modulation Type RB# Test Channel Band 1.4 3 5 10 15 20 QPSK 16-QAM 1 Half Full LCH MCH HCH Field Strength of Spurious Radiation 7 n n v -- -- -- v -- v -- -- v -- -- Note 1: The mark “v” means that this configuration is chosen for testing. Note 2: The mark “n” means that this bandwidth is not supported. 14/ 24

Report No.: BL-EC1930222-501 Channel Bandwidth Test Mode UL Channel UL Channel No. UL Frequency (MHz) (MHz) 1.4 18607 1850.7 3 18615 1851.5 5 18625 1852.5 Low Range 10 18650 1855 15 18675 1857.5 20 18700 1860 LTE Band 2 Middle Range 1.4/3/5/10/15/20 18900 1880 1.4 19193 1909.3 3 19185 1908.5 5 19175 1907.5 High Range 10 19150 1905 15 19125 1902.5 20 19100 1900 1.4 19957 1710.7 3 19965 1711.5 5 19975 1712.5 Low Range 10 20000 1715 15 20025 1717.5 20 20050 1720 LTE Band 4 Middle Range 1.4/3/5/10/15/20 20175 1732.5 1.4 20393 1754.3 3 20385 1753.5 5 20375 1752.5 High Range 10 20350 1750 15 20325 1747.5 20 20300 1745 1.4 20407 824.7 3 20415 825.5 Low Range 5 20425 826.5 10 20450 829 LTE Band 5 Middle Range 1.4/3/5/10 20525 836.5 1.4 20643 848.3 3 20635 847.5 High Range 5 20625 846.5 10 20600 844 5 23755 706.5 Low Range 10 23780 709 LTE Band 7 Middle Range 5/10 23790 710 5 23825 713.5 High Range 10 23800 711 5 23755 706.5 LTE Band 17 Low Range 10 23780 709 15/ 24

Report No.: BL-EC1930222-501 Channel Bandwidth Test Mode UL Channel UL Channel No. UL Frequency (MHz) (MHz) Middle Range 5/10 23790 710 5 23825 713.5 High Range 10 23800 711 5 40265 2557.5 10 40290 2560 Low Range 15 40315 2562.5 20 40340 2565 LTE Band 41 Middle Range 5/10/15/20 40740 2605 5 41215 2652.5 10 41190 2650 High Range 15 41165 2647.5 20 41140 2645 16/ 24

Report No.: BL-EC1930222-501 4.4 Test Setup 4.4.1 For Antenna Port Test (Diagram 1) 4.4.2 For Frequency Stability Test Temperature Common Chamber Antenna EUT System DC Power Simulator Supply (Diagram 2) 17/ 24

Report No.: BL-EC1930222-501 4.4.3 For Radiated Test (30 MHz ~ 1 GHz) Antenna 3m 1m~4m EUT 0.8m Spectrum Analyzer Preamplifier r (Diagram 3) 4.4.4 For Radiated Test (Above 1 GHz) Antenna 3m 1m~4m EUT 0.8m Spectrum Analyzer Preamplifier r (Diagram 4) 18/ 24

Report No.: BL-EC1930222-501 5 TEST ITEMS 5.1 Field Strength of Spurious Radiation 5.1.1 Limit FCC § 2.1053 & 22.917(a) & 24.238(a) & 27.53(c) & 27.53(g) & 27.53(h) & 27.53(m) RSS-Gen § 6.13 & RSS-130 § 4.7 & RSS-132 § 5.5 & RSS-133 § 6.5 & RSS-139 § 6.6 & RSS-199 § 4.5 FCC § 22.917(a) & 24.238(a) & RSS-132 § 5.5 & RSS-133 § 6.5 The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43+10*log(P) dB. This is calculated to be -13 dBm. FCC § 27.53(c) For operations in the 746–758 MHz band and the 776–788 MHz band, the power of any emission outside the licensee’s frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, in accordance with the following: (1) On any frequency outside the 746–758 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB; (2) On any frequency outside the 776–788 MHz band, the power of any emission shall be attenuated outside the band below the transmitter power (P) by at least 43 + 10 log (P) dB; (3) On all frequencies between 763–775 MHz and 793–805 MHz, by a factor not less than 76 + 10 log (P) dB in a 6.25 kHz band segment, for base and fixed stations; (4) On all frequencies between 763–775 MHz and 793–805 MHz, by a factor not less than 65 + 10 log (P) dB in a 6.25 kHz band segment, for mobile and portable stations; (5) Compliance with the provisions of paragraphs (c)(1) and (c)(2) of this section is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kHz or greater. However, in the 100 kHz bands immediately outside and adjacent to the frequency block, a resolution bandwidth of at least 30 kHz may be employed; (6) Compliance with the provisions of paragraphs (c)(3) and (c)(4) of this section is based on the use of measurement instrumentation such that the reading taken with any resolution bandwidth setting should be adjusted to indicate spectral energy in a 6.25 kHz segment. FCC § 27.53(g) For operations in the 600MHz band and the 698-746MHz band, the power of any emission outside a licensee’s frequency band(s) of operation shall be attenuated below the transmitter power (P) within the licensed band(s) of operation, measured in watts, by at least 43+10*log(P) dB. Compliance with this provision is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kHz bands immediately outside and adjacent to a licensee’s frequency block, a resolution bandwidth of at least 30 kHz may be employed. 19/ 24

Report No.: BL-EC1930222-501 FCC § 27.53(h) (1) & RSS-139 § 6.6 Except as otherwise specified below, for operations in the 1695-1710 MHz, 1710-1755 MHz, 1755-1780 MHz, 1915-1920 MHz, 1995-2000 MHz, 2000-2020 MHz, 2110-2155 MHz, 2155-2180 MHz, and 2180-2200 bands, the power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) in watts by at least 43 + 10 log10 (P) dB. FCC § 27.53(m) (4) & RSS-199 § 4.5 For mobile digital stations (BRS and EBS stations), the attenuation factor shall be not less than: • 40+10logP dB (−10 dBm, 100 nW) on all frequencies between the channel edge and 5 MHz from the channel edge. • 43+10logP dB (−13 dBm, 50 nW) on all frequencies between 5 MHz and X MHz from the channel edge, • 55+10logP dB (−25 dBm, 3 nW) on all frequencies more than X MHz from the channel edge, where X is the greater of 6 MHz or the actual emission bandwidth (26 dB). In addition, the attenuation factor shall not be less that 43 + 10 log (P) dB on all frequencies between 2490.5 MHz and 2496 MHz and 55 + 10 log (P) dB at or below 2490.5 MHz. Mobile Satellite Service licensees operating on frequencies below 2495 MHz may also submit a documented interference complaint against BRS licensees operating on channel BRS Channel 1 on the same terms and conditions as adjacent channel BRS or EBS licensees. RSS-130 § 4.7 The unwanted emissions in any 100 kHz bandwidth on any frequency outside the low frequency edge and the high frequency edge of each frequency block range(s), shall be attenuated below the transmitter power, P (dBW), by at least 43 + 10Log10(P) (watts), dB. However, in the 100 kHz band immediately outside of the equipment's frequency block range, a resolution bandwidth of 30 kHz may be employed. 5.1.2 Test Setup The section 4.4.3 and 4.4.4 (Diagram 3, 4) test setup description was used for this test. The photo of test setup please refer to ANNEX B. 5.1.3 Test Procedure 1. On a test site, the EUT shall be placed at 80cm height on a turn table, and in the position close to normal use as declared by the applicant. 2. The test antenna shall be oriented initially for vertical polarization located 3 m from EUT to correspond to the fundamental frequency of the transmitter. 3. The output of the test antenna shall be connected to the measuring receiver and the peak detector is used 20/ 24

Report No.: BL-EC1930222-501 for the measurement. 4. During the measurement of the EUT, the resolution bandwidth was to 1 MHz and the average bandwidth was set to 1 MHz. 5. The transmitter shall be switched on; the measuring receiver shall be tuned to the frequency of the transmitter under test. 6. The test antenna shall be raised and lowered through the specified range of height until the maximum signal level is detected by the measuring receiver. 7. The transmitter shall be rotated through 360°in the horizontal plane, until the maximum signal level is detected by the measuring receiver. 8. The test antenna shall be raised and lowered again through the specified range of height until the maximum signal level is detected by the measuring receiver. 9. The maximum signal level detected by the measuring receiver shall be noted. 10. The EUT was replaced by half-wave dipole (824 ~ 849 MHz) or horn antenna (1 850 ~ 1 910 MHz) connected to a signal generator. 11. In necessary, the input attenuator setting on the measuring receiver shall be adjusted in order to increase the sensitivity of the measuring receiver. 12. The test antenna shall be raised and lowered through the specified range of height to ensure that the maximum signal is received. 13. The input signal to the substitution antenna shall be adjusted to the level that produces a level detected by the measuring received, which is equal to the level noted while the transmitter radiated power was measured, corrected for the change of input attenuator setting of the measuring receiver. 14. The input level to the substitution antenna shall be recorded as power level in dBm, corrected for any change of input attenuator setting of the measuring receiver. 15. The measurement shall be repeated with the test antenna and the substitution antenna orientated for horizontal polarization. Final measurement calculation as below: The relevant equation for determining the ERP/EIRP from the radiated RF output power is: ERP/EIRP (dBm) = SA Read Value (dBm) + Correction Factor (dB) where: 21/ 24

Report No.: BL-EC1930222-501 ERP/EIRP = effective or equivalent radiated power, in dBm; SA Read Value = measured transmitter power received by EMI receiver or spectrum analyzer, in dBm; Correction Factor = total correction factor including cable loss, in dB; During the test, the data of Correction Factor (dB) is added in the EMI receiver or spectrum analyzer, so SA Read Value (dBm) is the final values which contains the data of Correction Factor (dB). For example: In the ERP test, when SA read value for GSM850 is 21dBm, and correction factor is 8dB, then final ERP value for GSM850 is: ERP (dBm) = 21dBm + 8dB = 29dBm 5.1.4 Test Result Please refer to ANNEX A.1. 22/ 24

Report No.: BL-EC1930222-501 ANNEX A TEST RESULTS A.1 Field Strength of Spurious Radiation Note 1: The frequencies of verdict which are marked by "N/A" should be ignored because they are UE carrier frequency. Note 2: When measurement frequency is above 18GHz, there is only noise floor of test system existing. So that frequency above 18GHz is not tested, and there is no test data above 18GHz in the report. Note 3: Test plots please refer to the document “Annex No.: BL-EC1930222-501 Data Part 1.pdf”. GSM, CDMA and WCDMA Mode Test Verdict Test Band Test Channel Refer to PlotNote3 Verdict GSM 850 LCH 1.1 Pass GSM 1900 HCH 2.1 Pass CDMA BC0 LCH 3.1 Pass WCDMA Band 5 MCH 4.1 Pass LTE Mode Test Verdict Test Test Test Test Test RB Refer to Verdict Band Bandwidth Channel Mode (Size#Offset) PlotNote3 Band 7 5 MHz LCH QPSK RB1#0 5.1 Pass 23/ 24

Report No.: BL-EC1930222-501 ANNEX B TEST SETUP PHOTOS Please refer to the document “BL-EC1930222-AR.PDF”. ANNEX C EUT EXTERNAL PHOTOS Please refer to the document “BL-EC1930222-AW.PDF”. ANNEX D EUT INTERNAL PHOTOS Please refer to the document “BL-EC1930222-AI.PDF”. --END OF REPORT-- 24/ 24


Document Created: 2019-03-28 13:37:21
Document Modified: 2019-03-28 13:37:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC