RF Test Report

FCC ID: 2AOPD-UT10

Test Report

Download: PDF
FCCID_4214120

ISSUED BY F CC/ | S E D Shenzhen BALUN Technology Co., Ltd. Mfl, FOR R I Rugged Smart Phone ISSUED TO Shenzhen UniStrong Science & Technology Co., Ltd. B, 4—4Factory, Zhengcheng Road, FuyongBaoan District, Shenzhen, TEST rcrort 6 C¥ HpBOcpiurcy j f tfi > Pa c a(jele|ai yleoa, BL—EC1930222—402 SUAENEIpC® Rugged Smart Phone Tested by: N Ia ome WebGINEluEZ UT12 ._.___Xia Long sBiefs[e) NElag<») UniStrong r}gl er) ICimsjeleE|reh 47 CFR Part 15 Subpart C . RSS—210 Issue 9 (2016—8) RSS—Gen Issue 5 (2018—4) SZeerlay 2A0OPD—UT1O o Sp) y[Ipjease 11546A—UT1O0 [ i @|ple[Ilek Pass |PSa»Feicy Mar. 11, 2019 DEqi i( Mar. 15, 2019 NOTE: This test report of test results only related to testing samples, which can be duplicated completely for the legal use with the approval of the applicant; it shall not be reproduced except in full, without the written approval of Shenzhen BALUN Technology Co., Ltd. Any objections should be raised within thirty daysfrom the date ofissue. To validate the report, please contact us. Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong, P. R. China 518055 TEL: +86—755—66850100, FAX: +86—755—61824271 www.baluntek.com

Report No.: BL-EC1930222-402 Revision History Version Issue Date Revisions Content Rev. 01 Mar. 15, 2019 Initial Issue TABLE OF CONTENTS 1 ADMINISTRATIVE DATA (GENERAL INFORMATION) ........................................................................ 4 1.1 Identification of the Testing Laboratory ............................................................................................ 4 1.2 Identification of the Responsible Testing Location ........................................................................... 4 1.3 Laboratory Condition ....................................................................................................................... 4 1.4 Announce ........................................................................................................................................ 4 2 PRODUCT INFORMATION ................................................................................................................... 5 2.1 Applicant Information....................................................................................................................... 5 2.2 Manufacturer Information ................................................................................................................ 5 2.3 Factory Information ......................................................................................................................... 5 2.4 General Description for Equipment under Test (EUT) ..................................................................... 5 2.5 Ancillary Equipment......................................................................................................................... 5 2.6 Technical Information ...................................................................................................................... 6 3 SUMMARY OF TEST RESULTS ........................................................................................................... 7 3.1 Test Standards ................................................................................................................................ 7 3.2 Verdict ............................................................................................................................................. 7 4 GENERAL TEST CONFIGURATIONS .................................................................................................. 8 4.1 Test Environments .......................................................................................................................... 8 4.2 Test Equipment List......................................................................................................................... 8 Description of Test Setup .......................................................................................................................... 9 4.2.1 For Radiated Test (Below 30 MHz) ........................................................................................... 9 4.2.2 For Radiated Test (30 MHz-1 GHz) .......................................................................................... 9 4.2.3 For AC Power Supply Port Test .............................................................................................. 10 5 TEST ITEMS ....................................................................................................................................... 11 5.1 Field Strength of Fundamental Emissions and Radiated Emissions .............................................. 11 5.1.1 Limit........................................................................................................................................ 11 5.1.2 Test Setup .............................................................................................................................. 12 5.1.3 Test Procedure ....................................................................................................................... 12 2 / 15

Report No.: BL-EC1930222-402 5.1.4 Test Result ............................................................................................................................. 12 ANNEX A TEST RESULT ....................................................................................................................... 13 A.1 Radiated Emissions....................................................................................................................... 13 ANNEX B TEST SETUP PHOTOS ......................................................................................................... 15 ANNEX C EUT EXTERNAL PHOTOS .................................................................................................... 15 ANNEX D EUT INTERNAL PHOTOS...................................................................................................... 15 3 / 15

Report No.: BL-EC1930222-402 1 ADMINISTRATIVE DATA (GENERAL INFORMATION) 1.1 Identification of the Testing Laboratory Company Name Shenzhen BALUN Technology Co., Ltd. Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road, Address Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Identification of the Responsible Testing Location Test Location Shenzhen BALUN Technology Co., Ltd. Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road, Address Nanshan District, Shenzhen, Guangdong Province, P. R. China The laboratory has been listed by Industry Canada to perform electromagnetic emission measurements. The recognition numbers of test site are 11524A-1. The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Accreditation The laboratory is a testing organization accredited by American Certificate Association for Laboratory Accreditation(A2LA) according to ISO/IEC 17025.The accreditation certificate is 4344.01. The laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L6791. All measurement facilities used to collect the measurement data are located at Block B, FL 1, Baisha Science and Technology Park, Shahe Description Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 518055 1.3 Laboratory Condition Ambient Temperature 20℃ to 25℃ Ambient Relative 45% to 55% Humidity Ambient Pressure 100 kPa to 102 kPa 1.4 Announce (1) The test report reference to the report template version v6.2. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. (3) The test report is invalid if there is any evidence and/or falsification. (4) The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. (5) This document may not be altered or revised in any way unless done so by BALUN and all revisions are duly noted in the revisions section. (6) Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without prior written approval from the laboratory. 4 / 15

Report No.: BL-EC1930222-402 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Shenzhen UniStrong Science & Technology Co., Ltd. B, 4-4Factory, Zhengcheng Road, FuyongBaoan District, Shenzhen, Address China 2.2 Manufacturer Information Manufacturer Shenzhen UniStrong Science & Technology Co., Ltd. B, 4-4Factory, Zhengcheng Road, FuyongBaoan District, Shenzhen, Address China 2.3 Factory Information Factory N/A Address N/A 2.4 General Description for Equipment under Test (EUT) EUT Name Rugged Smart Phone Model Name Under Test UT12 Series Model Name N/A Description of Model N/A name differentiation Hardware Version N/A Software Version N/A Dimensions (Approx.) N/A Weight (Approx.) N/A 2.5 Ancillary Equipment Battery Brand Name SJYEnergy Model No. BA7800 Ancillary Equipment 1 Serial No. N/A Capacity 8000 mAh Rated Voltage 3.8 V Limit Charge Voltage 4.35 V Adapter Brand Name N/A Model No. ASUC71W Ancillary Equipment 2 Serial No. N/A Rated Input 100-240 V , 0.7 A, 50/60 Hz Rated Output 5V 3A USB Cable Ancillary Equipment 3 Model No. N/A Length (Approx.) 0.8 m 5 / 15

Report No.: BL-EC1930222-402 2.6 Technical Information 2G Network GSM/GPRS/EGPRS 850/900/1800/1900 MHz; 3G Network WCDMA/HSDPA/HSUPA Band 1/2/5/8; CDMA Band Class 0; Network and Wireless EVDO Rel. 0/Rev. A Band Class 0; connectivity 4G Network LTE FDD Band 1/2/3/4/5/7/8/17/20/28; LTE TDD Band 38/40/41; Bluetooth, GPS, GLONASS, NFC, BDS The requirement for the following technical information of the EUT was tested in this report: Modulation Type ASK Mobile Product Type Portable Fix Location Frequency Range 13.56 MHz Receiver Categorization 3 Number of channel 1 Tested Channel 1 Antenna Type PIFA Antenna 6 / 15

Report No.: BL-EC1930222-402 3 SUMMARY OF TEST RESULTS 3.1 Test Standards No. Identity Document Title 47 CFR Part 15, 1 Subpart C Miscellaneous Wireless Communications Services (10-1-17 Edition) American National Standard for Testing Unlicensed Wireless 2 ANSI C63.10-2013 Devices RSS-Gen 3 General Requirements for Compliance of Radio Apparatus (Issue 5, Apr. 2018) RSS-210 4 Licence-Exempt Radio Apparatus: Category I Equipment (Issue 9, August 2016) 3.2 Verdict No. Description FCC Part No. ISED Part No. Test Result Verdict 15.225(d) RSS-210 B.6 1 Radiated Emissions ANNEX A.1 Pass 15.209 7 / 15

Report No.: BL-EC1930222-402 4 GENERAL TEST CONFIGURATIONS 4.1 Test Environments During the measurement, the normal environmental conditions were within the listed ranges: Relative Humidity 45% to 55% Atmospheric Pressure 100 kPa to 102 kPa Temperature NT (Normal Temperature) +22℃ to +25℃ Working Voltage of the EUT NV (Normal Voltage) 3.8 V 4.2 Test Equipment List Description Manufacturer Model Serial No. Cal. Date Cal. Due Spectrum Analyzer ROHDE&SCHWARZ FSV-30 103118 2018.06.11 2019.06.10 Vector Signal ROHDE&SCHWARZ SMBV100A 260592 2018.06.11 2019.06.10 Generator Signal Generator ROHDE&SCHWARZ SMB100A 177746 2018.06.11 2019.06.10 Switch Unit with OSP- ROHDE&SCHWARZ OSP120 101270 2018.06.11 2019.06.10 B157 Spectrum Analyzer AGILENT E4440A MY45304434 2018.11.06 2019.11.05 EMI Receiver ROHDE&SCHWARZ ESRP 101036 2018.06.13 2019.06.12 LISN SCHWARZBECK NSLK 8127 8127-687 2018.06.13 2019.06.12 Bluetooth Tester ROHDE&SCHWARZ CBT 101005 2018.06.11 2019.06.10 Power Splitter KMW DCPD-LDC 1305003215 -- -- Power Sensor ROHDE&SCHWARZ NRP-Z21 103971 2018.06.11 2019.06.10 Attenuator (20 dB) KMW ZA-S1-201 110617091 -- -- Attenuator (6 dB) KMW ZA-S1-61 1305003189 -- -- DC Power Supply ROHDE&SCHWARZ HMP2020 018141664 2018.06.21 2019.06.20 ANGELANTIONI Temperature Chamber NTH64-40A 1310 2018.06.26 2019.06.25 SCIENCE Test Antenna- SCHWARZBECK VAMP 9243 9243-556 2017.11.07 2019.11.08 Rod(9 kHz-30 MHz) Test Antenna- SCHWARZBECK FMZB 1519 1519-037 2017.07.22 2019.07.21 Loop(9 kHz-30 MHz) Test Antenna- SCHWARZBECK VULB 9163 9163-624 2018.07.11 2019.07.10 Bi-Log(30 MHz-3 GHz) Test Antenna- BBHA SCHWARZBECK 9120D-1148 2018.06.21 2019.06.20 Horn(1-18 GHz) 9120D Test Antenna- SCHWARZBECK BBHA 9170 9170-305 2018.06.21 2019.06.20 Horn(15-26.5 GHz) EMC Electronic Co., Anechoic Chamber 9m*6m*6m N/A 2017.02.21 2020.02.20 Ltd EMC 21.1m*11.6 Anechoic Chamber N/A 2017.02.21 2020.02.20 TECHNOLOGY LTD m*7.35m Shielded Enclosure ChangNing CN-130701 130703 -- -- Test Software BALUN BL410_E V18.626 -- -- 8 / 15

Report No.: BL-EC1930222-402 Description of Test Setup 4.2.1 For Radiated Test (Below 30 MHz) (Diagram 1) 4.2.2 For Radiated Test (30 MHz-1 GHz) (Diagram 2) 9 / 15

Report No.: BL-EC1930222-402 4.2.3 For AC Power Supply Port Test < 40cm > < 80cm > Communication Antenna EUT (RF Module) Pulse Limiter < 80cm > LISN Receiver Service Supplier (Diagram 3) 10 / 15

Report No.: BL-EC1930222-402 5 TEST ITEMS 5.1 Field Strength of Fundamental Emissions and Radiated Emissions 5.1.1 Limit FCC §15.225(a), (b), (c); RSS-210 B.6 According to FCC section 15.225, for <30 MHz, Radiated emissions were measured according to ANSI C63.4. The EUT was set to transmit at the highest output power. The EUT was set 10 meter away from the measuring antenna. The loop antenna was positioned 1 meter above the ground from the center of the loop. The measuring bandwidth was set to 10 KHz. (Note: During testing the receive antenna was rotated about its axis to maximize the emission from the EUT) There was no detected Restricted bands and Radiated suprious emission below 30MHz. The 30m limit was converted to 3m Limit using square factor(x) as it was found by measurements as follows; 3 m Limit(dBuV/m) = 20log(X)+40log(30/3)= 20log(15848)+40log(30/3) = 124dBuV Except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Field Strength@30m Field Strength@10m Field Strength@3m Frequency range (MHz) µV/m dBµV/m dBµV/m dBµV/m Below 13.110 30 29.5 48.58 69.5 13.110 ~ 13.410 106 40.5 59.58 80.5 13.410 ~ 13.553 334 50.5 69.58 90.5 13.553 ~13.567 15848 84 103.08 124 13.567 ~ 13.710 334 50.5 69.58 90.5 13.710 ~14.010 106 40.5 59.58 80.5 Above 14.010 30 29.5 48.58 69.5 NOTE: 1. Field Strength (dBµV/m) = 20*log[Field Strength (µV/m)]. 2. In the emission tables above, the tighter limit applies at the band edges. FCC §15.225(d) According to FCC section 15.209 (a), except as provided elsewhere in this subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table: Frequency (MHz) Field Strength (µV/m) 0.009 - 0.490 2400/F(kHz) 0.490 - 1.705 24000/F(kHz) 1.705 - 30.0 30 30 - 88 100 88 - 216 150 216 - 960 200 Above 960 500 11 / 15

Report No.: BL-EC1930222-402 Note: 1. For Above 1000 MHz, the emission limit in this paragraph is based on measurement instrumentation employing an average detector, measurement using instrumentation with a peak detector function, corresponding to 20 dB above the maximum permitted average limit. 2. For above 1000 MHz, limit field strength of harmonics: 54dBuV/m@3m (AV) and 74dBuV/m@3m (PK). 5.1.2 Test Setup See section 4.1.1 for test setup description for the antenna port. The photo of test setup please refer to ANNEX B. 5.1.3 Test Procedure The measurement frequency range is from 9 kHz to the 10th harmonic of the fundamental frequency. The Turn Table is actuated to turn from 0° to 360°, and both horizontal and vertical polarizations of the Test Antenna are used to find the maximum radiated power. Mid channels on all channel bandwidth verified. Only the worst RB size/offset presented. The power of the EUT transmitting frequency should be ignored. All Spurious Emission tests were performed in X, Y, Z axis direction. And only the worst axis test condition was recorded in this test report. Use the following spectrum analyzer settings: Span = wide enough to fully capture the emission being measured RBW = 1 MHz for f ≥ 1 GHz, 100 kHz for f < 1 GHz VBW ≥ RBW Sweep = auto Detector function = peak Trace = max hold 5.1.4 Test Result Please refer to ANNEX A.1 NOTE: 1. Results (dBuV/m) = Reading (dBuV) + Factor (dB/m) The reading level is calculated by software which is not shown in the sheet 2. Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) – Amplifier Gain (dB) 3. Over limit = Results – Limit. 12 / 15

Report No.: BL-EC1930222-402 ANNEX A TEST RESULT A.1 Radiated Emissions Test Data and Plots (30 MHz ~ 10th Harmonic)(at 3m chamber) Above 30 MHz ANT-V Frequency Peak Q-peak Average Factor PK Limit QP Limit AV Limit Margin Table (o) Height ANT Verdict (MHz) Level Level Level (dB) (dBuV/m) (dBuV/m) (dBuV/m) (dB) (cm) (dBuV/m) (dBuV/m) (dBuV/m) 45.274 23.12 -- -- -25.55 -- 40.0 -- 16.88 83.90 100 Vertical Pass 106.126 20.97 -- -- -27.77 -- 43.5 -- 22.53 280.60 100 Vertical Pass 270.257 23.61 -- -- -25.95 -- 46.0 -- 22.39 5.10 100 Vertical Pass 439.723 28.24 -- -- -22.23 -- 46.0 -- 17.76 188.90 100 Vertical Pass 722.649 35.13 -- -- -16.06 -- 46.0 -- 10.87 340.40 100 Vertical Pass 943.269 39.79 -- -- -12.08 -- 46.0 -- 6.21 37.50 100 Vertical Pass 13 / 15

Report No.: BL-EC1930222-402 Below 30 MHz ANT -H Frequency Peak Q-peak Average Factor PK Limit QP Limit AV Limit Margin Table (o) Height ANT Verdict (MHz) Level Level Level (dB) (dBuV/m) (dBuV/m) (dBuV/m) (dB) (cm) (dBuV/m) (dBuV/m) (dBuV/m) 48.668 23.02 -- -- -25.58 -- 40.0 -- 16.98 58.30 100 Horizontal Pass 102.489 21.16 -- -- -27.78 -- 43.5 -- 22.34 58.30 100 Horizontal Pass 236.801 22.64 -- -- -26.69 -- 46.0 -- 23.36 171.00 100 Horizontal Pass 349.050 26.03 -- -- -24.33 -- 46.0 -- 19.97 324.90 100 Horizontal Pass 585.186 32.95 -- -- -18.56 -- 46.0 -- 13.05 82.60 100 Horizontal Pass 758.045 35.81 -- -- -15.55 -- 46.0 -- 10.19 243.90 100 Horizontal Pass 14 / 15

Report No.: BL-EC1930222-402 ANNEX B TEST SETUP PHOTOS Please refer the document “BL-EC1930222-AE2.PDF”. ANNEX C EUT EXTERNAL PHOTOS Please refer the document “BL-EC1930222--AW.PDF”. ANNEX D EUT INTERNAL PHOTOS Please refer the document “BL-EC1930222--AI.PDF”. --END OF REPORT-- 15 / 15


Document Created: 2019-03-28 12:46:18
Document Modified: 2019-03-28 12:46:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC