BM816 Coperation manual_V1.1-Rev2

FCC ID: 2AON8-BM816

Users Manual

Download: PDF
FCCID_4344156

BM816 Coperation manual_V1.2 Important Statements Copyright Notice All right reserved: ShangHai broad mobi Communication Technology Co LTD This material and contains all of the content belong to ShangHai broad mobi Communication Technology Co LTD, and it is protected by Chinese law and any relevant copyright from international convention. anyone who donothave the authorization in written form by ShangHai broad mobi Communication Technology Co LTD cannot copy, spread, modify or other methods to use part or all of content, the offender will be investigated and affixed legal liability . Unguaranteed Statements Shanghai broad mobi Communication Technology Co LTD does not make express or implied statement or guarantee for any details from this document, and also not be responsible for Specific purpose of marketability and applicability or any indirect, special, or jointly any loss . Confidential Statements The information from this document include any attachment is confidential information. The receiver must know this document is classified, only use to the prescriptive purpose, and cannot leak out this document to any third party. Disclaimer Statements The company does not undertake any property or personal injury caused by inappropriate operation. Please must follow technical specifications and reference design from the manual. Before the statement, the company has right to make changes according the development of technological, and version change without prior notice.

2 Contents 1. Introduction ..................................................................................................................................................... 3 1.1 Purpose .......................................................................................................................................................... 3 1.2 General view .................................................................................................................................................. 3 2. Brief Introduction ............................................................................................................................................. 3 2.1 Necessary equipment .................................................................................................................................... 3 2.2 Feature ........................................................................................................................................................... 4 2.3 Parameter ...................................................................................................................................................... 4 2.4 System block diagram .................................................................................................................................... 6 2.5 RF Interface .................................................................................................................................................... 6 3. Set up and Install .............................................................................................................................................. 7 3.1The Construct of Hardware Environment ....................................................................................................... 7 3.2 The Construct of Software Environment...................................................................................................... 13 4. Debugging and Testing ................................................................................................................................... 18 4.1 How to use USB cable to communicate ....................................................................................................... 18 4.2 How to make data connection ..................................................................................................................... 19 4.3 How to make voice call out .......................................................................................................................... 22 4.4 How to check module information and SIM card status ............................................................................. 23 4.5 How to set airplane mode............................................................................................................................ 24 Additional testing, Part 15 Subpart B disclaimer ............................................................................................... 25 Compliance Information .................................................................................................................................... 25 FCC Caution: ....................................................................................................................................................... 25

1. Introduction BM816 EVB use for testing the function and performance of BM816 module, and provide relevant assessment to help customer develop application. 1.1 Purpose This document detailed describes the basic function of BM816 and point out the main feature is data transmission. 1.2 General view Chapter 2, Main introduction the Development environment and list of equipment for BM816 Chapter 3, in detail describe the construct of software environment for BM816 Chapter 4, in detail describe the methods of data transmission and common business for BMS816 2. Brief Introduction BM816 EVB is development and evaluation board that for customer to test the performance and function of BM816 modul.This EVB board is module adapter PCBA board, it has USB interface, SIM card interface, MINI PCI—E port 3 ports. 2.1 Necessary equipment The chart 1 detailed describe the necessary equipment for testing environment BM816. Chart 1: EVB Kit List Equipment EVB kit whether or not Description Include EVB Board Yes Use for BMS816test USB Cable Yes Standard USB Antenna Yes Antenna has two parts: 1) diversity antenna and main antenna 2) antenna patch cord BM816 Board Not SIM /USIM Not Need a SIM/USIM Card have balance

2.2 Feature ©3GPPnetwork mode FDD—LTE/HSPA+/HSUPA/HSDPA/UMTS/EDGE/GPRS/GSM ® Band Frequency LTE—FDD: B2/B4/B5/B12/B13/B17 UMTS : B2/B4/B5 GSM : B2/B5 ® Transmit Power(Max) LTE—FDD/UMTS: class 3 GSM B2: class 1 GSM B5: class 4 EDGE B2/B5: class E2 ® Peak rate FDD—LTE: 150 Mbps DL, 50 Mbps UL DC—HSDPA: 42Mbps DL HSUPA: 5.76Mbps UL WCDMA: 384Kbps DL, 384Kbps UL EDGE: 296 Kbps DL, 236.8Kbps UL GPRS: 107 Kbps DL, 85.6Kbps UL ® Telecom Service SMS/PS/voice ® Consumption Shut—down Leakage current: <20uA Standby: <5mA Voice call: <300mA Data transfer: <800mA ® Qualcomm platform MDM9607(MDM9628)+WTR2965 ® Package&Size LGA 35.8mm *37.8mm *2.$mm 2.3 Parameter ® Working Frequency B2: UL(1850—1910MHz), DL(1930—1990MHz] B4: UL(1710—1755MHz), [Working Frequency DL(2110—2155MHz) B5: UL(824—849MHz]}, DL(869—894MHz) B12: UL(699—716MHz], DL(729—746MHz) B13: UL{(777—787MHz), DL(746—756MHz) B17: UL(704—716MHz), DL(734—746MHz)

®© Max Output Power B2 24+1 B4 23+2 B5 23+2 LTE B12 22+2 B13 22+1 TX Max Power(dBm) B17 23+1 B2 23+1 WCDMA B4 23+2 B5 22+2 B2 29.0+1.0 GSM B5 32.0+1.0 ®© Antenna Type External 2 Antenna: Main/DRX Antenna ® Antenna Gain (Max) Frequency (MHz) |Gain (DBi) 791 114 824 0.91 896 0.78 960 0.14 1710 1.70 1805 2.30 1880 3.25 1950 3.10 2150 2.28 2300 1.30 2400 1.78 2500 2.04 2690 0.94 ® Working Voltage 3.3~4.2V, TYP:3.6V ® Working Temperature —75~25°C, TYP:; 25°C ® Limit operating Temperature ~40~—30°C, 75~85°C ® Storage Temperature ~40~95

6 2.4 System block diagram GPS GPS ANT MAIN ANT FEM WTR2965 AUX ANT Inerface MDM9607 PMD9607 USB UART PCM/IIS USIM SGMII SDIO I2C ADC MEMORY 2.5 RF Interface BM816 provide 2 RF connector, Main/Diversity Antenna. The customer antenna needs to be distributed on the periphery of the main board, and is connected with the antenna pad of the module through the 50ohm impedance microstrip line. line-losses between antenna and RF connector on module must follow indicator as below.  B2/B4/B5/B12/B13/B17<1dBm

3. Set up and Install EVB construct divide by hardware environment and software environment: 1) The Construct of Hardware Environment How put in or out SIM/USIM card How to link module How to link main antenna How to link diversity antenna How to link USB cable How to power on How to power off 2) The Construct of Software Environment How to install driver How to upgrade firmware 3.1The Construct of Hardware Environment 3.1.1. How put in or out SIM/USIM card Need a SIM/USIM Card havebalance. The step for put in SIM /USIM: 1) Put EVB upwards, hold the yellow button, and pull out the SIM Card slot. See Picture 1 and 2. Picture 1

8 Picture 2 2) Put SIM Card into the slot, make sure SIM chip upwards, put into the SIM slot on EVB Boar. See Picture 3 and 4. Picture 3

( 5 Ens13 Picture 4 3.1.2. How to link module Put module into development board after finish install SIM card: 1) Put EVB Board right side up, and put module into Mini PCI—E connector. See Picture 5, 6 and 7. Picture 5

10 Picture 6 Picture 7 3.1.3. How to link main antenna Before the link antenna, need finish put in SIM card and Module. 1) Antenna interface located on top right of module. 2) Spike RF Patch cord into module connector smoothly. See Picture 8. Picture 8 3) Tightening antenna SMA contact and RF patch cord SMA contact. See Picture 9

11 Picture 9 3.1.4. How to link diversity antenna Before link diversity antenna, need finish put SIM Card and module in, and link the main antenna 1) The antenna interface is located on the top left of module . 2) Spike RF Patch cord into module connector smoothly. See Picture 10. Picture 10 3) Tightening antenna SMA contact and RF patch cord SMA contact. See Picture 11

12 Picture 11 3.1.5. How to link USB cable Follow the step to link USB cable: BM816 1)Put EVB Board into the USB interface of PC.See Picture1 2. CC A~~ Picture12

13 3.1.6. How to power on BMS816 only support electrify power on, all need just put the USB cable into PC, and module will auto power on. 3.1.7. How to power off BMS816 support outage shutdown, module will shut down when VBAT blackout. 3.2 The Construct of Software Environment 3.2.1. How to install driver 1) First use USB cable to connect PC and module, power module on, Windows will popup new equipment window, choose"No, not this time", then click"Next" Hardware Update Wizard Welcome to the Hardware Update Wizard Windows will search for current and updated software by looking on your computer, on the hardware installation CD, or on the Windows Update Web site (with your permission}. Online privacy information Can Windows connect to Windows Update to search for software? OYes, this time only D) Yes, now and every time | connecta device (@) No, not this time Click Next to continue. Picture 13: find new hardware 2) Choose "Install from a list or specific location (Advanced)", click"Next"

14 Hardware Update Wizard This wizard helps you install software for: Unknown Device If your hardware came with an installation CD :2 or floppy disk. insertit now. What do you want the wizard to do? (DInstall the software automatically (Recommended] (@ Install from a list or specific location [Advanced) Click Next to continue. Picture 14: choose the method for install driver BMS816 choose the path that driver file is located, and click "Yes"; 3) Click"Next" Hardware Update Wizard Please choose your search and installation options. \\ & (®) Search for the best driverin these locations. Use the check boxes below to limit or expand the default search, which includes local paths and removable media. The best driver found will be instailed. [_] Search removable media [floppy, CD—ROM...] Include this location in the search: [FABMC_PS208_04BD_4402.V1.0.1.0_160722.00 w) [ Browse ) O Don‘t search. | will choose thedriver to install. Choosethis option to selectthe device driver from a list. Windows does not quarantee that thediver you choose will be the best match for your hardware:. Picture 15: Choose driver file path 2 in XP 4) —The driver is installing

15 Hardware Update Wizard Please wait while the wizard installs the software... 24 S 3 Network Connect HS—USB NMEA m gx C qcusbser.sys To CAWINDOWS\system32\DRIVERS (io on on on n n on o n on on on o m n an m n n on m n on n on n m m n on m n t Picture 16: driver install 5) Wait for notes "Completing hardware Upgrade wizard", click " Finish " finish the install. Hardware Update Wizard Completing the Hardware Update Wizard The wizard has finished installing the software for: it Network Connect HS—USB Diagnost ics t f-L‘:— Click Finish to close the wizard. Picture 17: Finish the driver install 6) Operation system will popup 4 new equipments, please repeat step 1 to 6. After finish install, you will see them in device manager. See below Picture 18.

16 3 Computer Management ) rie Action View Wedow Heb Al8) x) (8 Consuter Management (Loca) = a 8 System Tools # Conputer # Event Vewer % <» Diskdives + Shared Folders & § Dislay adapters # Local Users and Groups ® 13 DYOJCD—ROM dives % Performance Logs and Alert @6 i Human Interface Devices ‘Device Manager + @ 10E ATAJATAPI controlers = j Storage % > Keypoords ® Removatle Storage # *) Me and other pornting devices Dis.Defragnenter = Hodems Did.Manapement ® (8e Services and Applcations + W Montors 5 MB Network dapters MB Morvel Yulon 89€0056 RCL—E Gigabt Ethermet Controler _¥ conmniations Pot (COM1) S ECP Proter Port(PT%) se _ Network Connect H5—Us8 Dlagnostcs (CoNS) _¥ Network Comect Hs—use nmen (cons) + hoassos # ®, Sound, video and game controlers ® e Storage vehimes # system devices « g UniversalSera Bus controters Picture 18: module appear in device manager 3.2.2. How to upgrade firmware BM816 provide 1key upgrade tool for Windows, step of upgrade firmware: 1) —Use USB cable to connect PC and BM816, double—click "GUI_dI"when the device manager recognize com port. See Picture 19; @O#T + mma> roraprensansis > smmyoaganmaaoniios + nremonscomemanesrum » [zan man saw tan mm 2l n +) an> @un sases . | 4 mc T is > 4 seiss aae G mmeze 5ng 4 uk S dn satmse | W reascee samneisime a unseere finex 4 ameene i ce 4 vouner Hicorotsotntersoas pes Hcomnigmas 4 mao Hoomiens I 4 mm Slbstce e se * ts £ 1000gomins ts ons Lns Eivsisne ons Sre Sevivemiens itpsmons. w 4pid w 4o 4 on 4 mon 4 avermsausowescucrmaucen 4 mernnscroams 4 mcrmiustmaneninsnsom 4 resmpmnscoe 4 romeemnsoosmvinsnns pro 4 mdenorat 4 revermasciommmnconin | 4 reemezons sase snnse

17 Picture 19: the window of firmware upgrades 1 2) Follow the note to press "Download", start to upgrade. See Picture 20 = Sc= + / BroadMobi P750A_2.0.5_181205,RCSNO_P750A_OCLO_B328_2.0.0_20181205,P750A_2.0... g & Conpleted 0% OneKeyUpdate V1.0. 0.3 N Picture 20: Firmware is upgrading 3) —There is note "Success to upgrade" when it all finished. | £ BroadMobi P750A_2.0.5181205,RCSNO_P750A_OCLO83282.0.020181205,p75oa_2.0.... ME g% so> @ Connect to device Conplete 3% OneKeyUpdate V1. 0. 0.3 Picture 21: Finish firmware upgrade 4) Do not remove USB cable from PC during the upgrade process, whole process cost 2—3 minutes. Warning: Cannot outage during upgrade process, please make sure stabilization power supply, otherwise will damage module. Warning: Cannot outage during upgrade process, please make sure stabilization power supply, otherwise will damage module.

18 4. Debugging and Testing The EVB through USB to communicate, can use for phone call, connect internet, this chapter will discuss in detail. 4.1 How to use USB cable to communicate 1) The communication methods for PC and BM816 is AT command, to test whether PC successfully communicate BM816 by sending AT command. 2) —Open HyperTerminal, choose AT port. Connect To HyperT erminalasdasd Connect using: |COM8 y Network Connect HS—USB Modem #2 COM1 COMS [_] Detect Calrie_ COM3 TCP/IP (Winsock] Picture 22: Choose the port for HyperTerminal 3) Choose baud rate 9600, choose none for flow control, other setting default. See Picture 23

19 HyperTerminalasdasd — HyperTerminal 0# & tB & o ([PotSaing: Bs pesecond.(3600 Doib(a Patl: ow Stpbis 1 Flow conict [None ez | |« oscomedted Agodiea soostH n Picture 23: ConfigurationHyperTerminal 4) Sending AT, check itis orisn‘tcommunicated. See Picture 24 : asdasd — HyperTermina Fie Edt Vem Cal. Tenaer teb ae » 3 8 at i OK «i Eomneced a005 Ato daten ssooote mm Picture 24: UsingHyperTerminal sending at 4.2 How to make data connection Put SIM/USIM card that support data traffic into EVB board, connect antenna right, though USB cable to connect PC and power on module. 1) through NDIS to dial. a) type "at$qermcall=1,1", create network connection.

20 asdasd HyperTerminal Me: Ed Vew. Col BBEA tb D# 03 1B & at 8 OK at§gcrmcal1=1 , 1 $QCRHCALL: 1, ¥4 OK Ecomected i0000 Aodted 560641 mm Picture 25: using HyperTerminal to send AT command to NDIS dial b) Type"at$qermcall=0,1", to disconnect Network connection. 2) through MODEM to dial A) open Network Connections to choose to connect Internet and click "Next" New Connection Wizard Network Connection Type ‘What do you want to do? (®) Connect to the Internet Connect to the Intemnet so you can browse the Web and read email. () Connect to the network at my workplace Connect to a business network [using dia—up or VPN] so you can work from home, a field office, or another location. () Set up a home or small office network Connect to an existing home or small office network or set up a new one. () Set up an advanced connection Connect directly to another computer using your serial, parallel, or infrared port, or set up this computer so that other computers can connectto it. Picture 26: Choose Network Connection B) Choose "Set up my Connection manually", click "Next"

21 New Connection Wizard Getting Ready The wizard is preparing to set up your Internet connection. How do you want to connect to the Internet? C Choose from a list of Internet service providers [ISPs] @ Set up my connection manually For a diakup connection, you will need your account name, password, and a phone number for your ISP. For a broadband account, you won‘t need a phone number. C Use the CD | got from an ISP Picture 27: Create new Network connection C) Choose "Connect using a dial—up modem" New Connection Wizard Internet Connection How do you want to connectto the Internet? This type of connection uses a modem and a reqular or ISDN phone line. () Connect using a broadband connection that requires a user name and password This is a high—speed connection using either a DSL or cable modem. Your ISP may refer to this type of connection as PPPoE. () Connect using a broadband connection that is always on This is a high—speed connection using either a cable madem, DSL or L&N connection. It is always active, and doesn‘t require you to sign in. Picture 28: Choose Modem to Dial D) type the number u want to dial, the user and password need according different carriers. For example, the user and password for China Union 3G and 4G is empty (not type any character ) the number is *99#, then

22 choose E4 Connect‘. New Connection Wizard Internet Account Information You will need an account name and passwordto sign in to your Intemnet account. Type an ISP account name and password, then write down this information and store it in a safe place. {If you have forgotten an existing account name or password, contact your ISP.) User name: "goy Password: Confirm password: [¥] Use this account name and password when anyone connects to theInternet from this computer Make this the default Internet connection Picture 29:; Configuration Network Connection E) there is a note after Network Connection is successful. Connecting adasd... g Dialing ... Cancel Picture 30: Dial success 4.3 How to make voice call out A. Put SIM/USIM card which support voice service into EVB board. B. Open the HyperTerminal, configuration same as Picture 19 and 20. C. The AT command for dial phone call is "ATDXXX;". For example, we make a call to 10010, type "ATD10010;"

23 + asdasd — HyperTerminal ie Edt Vew Cal Tersfor. tb D# a 3 48 atd10010; im OK RING_BACK CONNECT comeated 00022 Auto dotect seoeien " um 7 Picture 31: Using HyperTerminal dial number D. The AT Command for Hang up is "AT+CHUP". en mtc Fle Ed vew Cal Tremfor Heb 1¢ #3 tB atd10010; 0K RING_BACK CONNECT at—chup OK +DISC:2,0,0,16, "10010",129, "~ Comnected 0:01:25 Aute detect ©e00ite1 t num Picture 32: Hand up phone call 4.4 How to check module information and SIM card status A. Put SIM/USIM Card which supports voice service into EVB board. a) Open the HyperTerminal, configuration same as Picture 19 and 20. B. Type "ATI", shows module information; type "AT+CPIN?" shows SIM Card Status.

24 + asdasd — HyperTerminal fle: Eit Yew: Call Tramfer: Heb 0s = 5 s ati 8 Manufacturer: BroadHobi Model; BM806C Revision: ML.1.7 E1.1.0_AL.1.7 IHET: 862845029258189 *GCAP: +CCSM 0K atrcpin? +CPIN: READY OK Comnected 0:00:13 Autdetect 360004 num Picture 33: Show module information and SIM Status Warning: SIM Card shows "Ready" indicate SIM status is normal, if it shows other, it means unmoral, please make sure your SIM is whether or not valid, or has pin. 4.5 How to set airplane mode A. Type ATCommad"AT+CFUN=4", enter into airpalne mode. (at+cfun=1 is normal mode; at+cfun=0 turn off RF, SIM card cannotregister ; defaultis equal1; at+cfun? shows currentstatus ) P uce Fie Edt Vew Cal Transfor Heb ND# # 3 18B at+cfun=k OK at—cfun? *CFUN: 4 OK € Comected 0:00:36 Aute detect se008—N— + ® num Picture 34 : Setting airplane mode

25 Compliance Information FCC Compliance Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Additional testing, Part 15 Subpart B disclaimer The module only complies with the FCC CFR 47 Parts 2, 22, 24, 27. If the module is installed in the host device, the host manufacturer is responsible for the compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. For example, if the host manufacturer markets their product as being Part 15 Subpart B compliant (when it also contains unintentional-radiator digital circuity), then the host manufacturer shall provide a notice stating that the final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. FCC Caution: (1)Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. (3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (4) the modules FCC ID is not visible when installed in the host, or(5) if the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module: Contains Transmitter Module FCC ID: 2AON8-BM816.


Document Created: 2019-07-03 10:10:05
Document Modified: 2019-07-03 10:10:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC