User Manual

FCC ID: 2AON7RT18

Users Manual

Download: PDF
FCCID_4302059

TRUE WIRELESS EARBUDS WITH CHARGING CASE RT—18 USER MANUAL WHAT‘S INCLUDED 1X Charging box 2 X Earbud{L&R) 1X Charging Cable 1X Instruction manual BLUETOOTH PARING INSTRUCTION 1. Pick up two earbuds from charge casing to power on, you will hear "power on" meanwhile two earbuds flash blue LED light, after seconds it will be paired automatically at the same time will hear 2 chimes "dong dong" from two earbuds 2. Keep the distance between the device and earbuds within 10 meters. (For Bluetooth paring only) 3. Turn on the Bluetooth function on your device, search and select the Bluetooth code "Soundmates". 4. You will hear "device connected" Indicating that Soundmates are now ready to use. Remark: two ways to reset earbuds. If your Soundmates aren‘t pairing to each other, you need to put them in the charge casing then pick up them and it will auto pairing. FUNCTIONS) Power on: Pick up two earbuds from charge casing

Power off: Put back two earbuds into charge casing. MUSIC/CALL 1. Previous/Next song When music is playing, tap left earbud for three times to go to the previous song, tap right earbud for three times to go to the next song. 2. Play/pause Tap right earbud twice to play/pause music. 3. Answer /End an incoming call Tap right/left earbud twice to answer a call, and tap right/left twice again when you want to end the call. WAKE UP VOICE ASSISTANT/SIRI Tap left earbud twice, you will hear a beep to tell you that VA/Siri has woken up and is waiting to do your conmmands. CHARGING (Be sure fully charge the earbuds before use for the first time.) Charging the box: -Plug the standard USB charging cable into the charging box and a powered USB port. The charging box’s LEDindicators start to flash GREEN while charging. It fully charged when it stop flash and keep GREEN on. Charging the earbuds: -Put the earbuds back into the charging box. The earbuds LED indicators turn RED and the charging box LEDindicators turn BLUE, both of them will be off when earbuds fully charged. SPECIFICATIONS Bluetooth Version: 5.0 Battery built-in earbuds: 30mAh*2, 3.7V Charging box battery: 250mAh, 3.7V Power output: 6mW Charging time for earbuds: 1H Charging time for station: 1H Music play time: about 3H at Max volume Talking time: about 3H Frequency: 20-20KHZ Product size: 51.5*44*21MM

FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement. in portable exposure condition without restriction.


Document Created: 2019-05-31 16:09:14
Document Modified: 2019-05-31 16:09:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC