SAR Report Part 2

FCC ID: 2AOMA-M100

RF Exposure Info

Download: PDF
FCCID_3938666

No.B18N00806-SAR Page 63 of 89

No.B18N00806-SAR Page 64 of 89 ANNEX I Dipole Calibration Certificate 2450 MHz Dipole Calibration Certificate

No.B18N00806-SAR Page 65 of 89

No.B18N00806-SAR Page 66 of 89

No.B18N00806-SAR Page 67 of 89

No.B18N00806-SAR Page 68 of 89

No.B18N00806-SAR Page 69 of 89

No.B18N00806-SAR Page 70 of 89

No.B18N00806-SAR Page 71 of 89

m revomnmcrenace naw12 urve Shenzhen Academy of Information and Communications Technology t3 — 6 x i1940 cahb'_'aflon La boratory of e\“\“\\;’s S Schweizerischer Kalibrierdienst Schmid & Partner % Service suisse d‘étalonnage Engineering AG Tm C Servizio svizzero dtaratura Zeughausstrasse 43, 8004 Zurich, Switzerland @,@F S Swiss Calibration Service hahts Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client TMC—SZ (Auden) Certificate No:: D5GHzV2—1238_Sep16 CALIBRATION CERTIFICATE Object D5GHzV2 — SN:1238 Calibration procedure(s) QA CAL—22.v2 Calibration procedure for dipole validation kits between 3—6 GHz Calibration date: September 21, 2016 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probabilty are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facifty: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 06—Apr—16 (No. 217—02288/02289) Apr—17 Power sensor NRP—291 SN: 103244 06—Apr—16 (No. 217—02288) Apr—17 Power sensor NRP—Z291 SN: 103245 06—Apr—16 (No. 217—02289) Apr—17 Reference 20 dB Attenuator SN: 5058 (20k) 05—Apr—16 (No. 217—02292) Apr—17 Type—N mismatch combination SN: 5047.2 / 06327 05—Apr—16 (No. 217—02295) Apr—17 Reference Probe EX3DV4 SN: 3503 0—Jun—16 (No. EX3—3503_Jun16) Jun—17 DAE4 SN: 601 30—Dec—15 (No. DAE4—601_Dec15) Dec—16 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter EPM—442A SN: GB37480704 07—Oct—15 (No. 217—02222) in house check: Oct—16 Power sensor HP 8481A SN: USs7202783 07—Oct—15 (No. 217—02222) in house check: Oct—16 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (No. 217—02228) in house check: Oct—16 RF generator R&S SMT—06 SN: 100972 15—Jun—15 (in house check Jun—15) in house check: Oct—16 Network Analyzer HP 8753E SN: US37300585 18—Oct—01 (in house check Oct—15) in house check: Oct—16 Name Function Signature Calibrated by: Claudio Loubler Laboratory Technician ) Approved by: Katia Pokovic Technical Manager /Cfg Issued: September 22, 2016 This calibration certificate shall not be reproduced exceptin full without written approval of the laboratory. Certificate No: D5GHzV2—1238_Sep16 Page 1 of 16

= Shed t inf and Communications Technology Calibration o Laboratory of G Schweizerischer Kalibrierdienst Schmid & Partner c Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilatera! Agreement for therecognition of callbration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. «_ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D5GHzV2—1238_Sep16 Page 2 of 16

— revrnncironne naewi 2 urze = ‘ I‘ I Shenzhen Academy of Information and Communications Technology Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.8.8 Extrapolation Advanced Extrapolation Phantom ModularFlat Phantom V5.0 Distance Dipole Center— TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm Graded Ratio = 1.4 (Z direction) 5200 MHz & 1 MHz 5300 MHz a 1 MHz Frequency 5500 MHz & 1 MHz 5600 MHz & 1 MHz 5800 MHz 1 MHz Head TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 36.0 4.66 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 34.6 6 % 4.54 mho/m + 6 % Head TSL temperature change during test <0.5 °C — SAR result with Head TSL at 5200 MHz SAR averaged over 1 m° (1 g) of Head TSL Condition SAR measured 100 mW input power 7.76 Wikg SAR for nominal Head TSL parameters normalized to 1W 76.9 Wikg 2 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 100 mW input power 2.22 Wikg SAR for nominal Head TSL parameters normalized to 1W 21.9 Wikg £ 19.5 % (k=2) Certificate No: DSGHzV2—1238_Sep16 Page 3 of 16

anctunesnenses na wi e urve :‘ I y o information Communcatons ind Tecmology ~g> n n > >~ Head TSL parameters at 5300 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.9 4.76 mho/m Measured Head TSL parameters (22.0 £0.2) °C 34.4 £ 6 % 4.63 mho/m + 6 % Head TSL temperature change during test <0.5 °C ~— SAR result with Head TSL at 5300 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.38 W/kg SAR for nominal Head TSL parameters normalized to 1W 83.0 W / kg x 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 100 mW input power 2.40 W/kg SAR for nominal Head TSL parameters normalized to 1W 28.7 Wikg # 19.5 % (k=2) Head TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.6 4.96 mho/m Measured Head TSL parameters (22.0 £0.2) °C 34.2 26 % 4.83 mho/m + 6 % Head TSL temperature change during test <0.5 °C — SAR result with Head TSL at 5500 MHz SAR averaged over 1 cm‘ (1 g) of Head TSL Condition SAR measured 100 mW input power 8.21 Wig SAR for nominal Head TSL parameters normalized to 1W 81.3 Wikg 2 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.34 Wikg SAR for nominal Head TSL parameters normalized to 1W 28.1 Wikg # 19.5 % (k=2) Certificate No: DSGHzV2—1238_Sep16 Page 4 of 16

= geivenm ncrrone na w i2 urze Shenzhen Academy of Information and Communications Technology fag— c — + Head TSL parameters at 5600 MHz Thefollowing parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.5 5.07 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 34.0 £ 6 % 4.93 mho/m x 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.38 Wikg SAR for nominal Head TSL parameters normalized to 1W 82.9 Wikg x 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 100 mW input power 2.39 Wikg SAR for nominal Head TSL parameters normalized to 1W 23.6 Wikg £ 19.5 % (k=2) Head TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.3 5.27 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 33.7 2 6 % 5.14 mho/m 2 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 7.96 Wikg SAR for nominal Head TSL parameters normalized to 1W 78.8 Wikg £ 19.9 % (k=2) SAR averaged over 10 cm° (10 g) of Head TSL condition SAR measured 100 mW input power 2.26 Wikq SAR for nominal Head TSL parameters normalized to 1W 22.3 Wikg x 19.5 % (k=2) Certificate No: D5GHzV2—1238_Sep16 Page 5 of 16

= geivenm ncrrone na w i2 urze Shenzhen Academy of Information and Communications Technology t c + Body TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 49.0 5.30 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 47.5 26 % 5.45 mhoim + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.48 Wig SAR for nominal Body TSL parameters normalized to 1W 74.4 Wikg x 19.9 %(ke=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.10 Wikg SAR for nominal Body TSL parameters normalized to 1W 20.9 Wikg x 19.5 % (k=2) Body TSL parameters at 5300 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.9 5.42 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 47.3 £ 6 % 5.59 mho/m + 6 % Body TSL temperature change during test <0.5 °C — SAR result with Body TSL at 5300 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.69 Wikg SAR for nominal Body TSL parameters normalized to 1W 76.5 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.17 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.5 Wikg x 19.5 % (k=2) Certificate No: D5GHzV2—1238_Sep16 Page 6 of 16

— knerincenonmce nawi 2 urve = I Shenthen Academy of Information A and Communications Technology ~g> ns > ~~ Body TSL parameters at 5500 MHz Thefollowing parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.6 5.65 mho/m Measured Body TSL parameters (22.0 £0.2) °C 47.0 26 % 5.86 mho/m + 6 % Body TSL temperature change during test <0.5 °C ns SAR result with Body TSL at 5500 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 8.03 Wiq SAR for nominal Body TSL parameters normalized to 1W 79.9 Wikg 2 19.9 % (k=2) SAR averaged over 10 m‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.23 Wikg SAR for nominal Body TSL parameters normalized to 1W 22.1 Wikg £ 19.5 % (k=2) Body TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.5 5.77 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 46.8 +6 % 6.00 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.95 Wikg SAR for nominal Body TSL parameters normalized to 1W 79.1 Wikg 2 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.23 W/kg SAR for nominal Body TSL parameters normalized to 1W 22.1 Wikg £ 19.5 % (k=2) Certificate No: D5GHzV2—1238_Sep16 Page 7 of 16

= geivenm ncrrone na w i2 urze Shenzhen Academy of Information and Communications Technology fago c o + Body TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.2 6.00 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 46.4 2 6 % 6.29 mho/m x 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.66 Wikg SAR for nominal Body TSL parameters normalized to 1W 76.2 Wikg £ 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.13 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.1 Wikg # 19.5 % (k=2) Certificate No: D5GHzV2—1238_Sep16 Page 8 of 16

= geivenm ncrrone na w i2 urze Shenzhen Academy of Information and Communications Technology t3 — Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL at 5200 MHz Impedance, transformed to feed point 47.1 0 — 5.8 jQ Return Loss —23.6 dB Antenna Parameters with Head TSL at 5300 MHz Impedance, transformed to feed point 50.5 Q — 3.2 jQ Return Loss —29.8 dB Antenna Parameters with Head TSL at 5500 MHz Impedance, transformed to feed point 49.0 0 +2.5 jQ Return Loss —31.2 dB Antenna Parameters with Head TSL at 5600 MHz Impedance, transformed to feed point 50.0 Q + 0.6 jQ Return Loss —44.1 dB Antenna Parameters with Head TSL at 5800 MHz Impedance, transformed to feed point 55.6 Q + 1.9 jQ Return Loss —25.1 dB Antenna Parameters with Body TSL at 5200 MHz Impedance, transformed to feed point 48.6 0 — 3.4 jQ Return Loss —28.6 dB Antenna Parameters with Body TSL at 5300 MHz Impedance, transformed to feed point 49.6 2 —2.4 jQ Return Loss — 32.3 dB Antenna Parameters with Body TSL at 5500 MHz Impedance, transformed to feed point 49.5 0 +2.5 jQ Return Loss —31.7 dB Certificate No: D5GHzV2—1238_Sep16 Page 9 of 16

m geivenm ncrrone na wi2 urze mt n n nc n e n = > Shenzhen Academy of Information and Communications Technology tago ~ > —> Antenna Parameters with Body TSL at 5600 MHz Impedance, transformed to feed point 50.8 Q + 2.5 jQ Return Loss —31.7 dB Antenna Parameters with Body TSL at 5800 MHz Impedance, transformed to feed point 56.0 2 + 3.0 jQ Return Loss —24.0 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.191 ns J After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole armsin order to improve matching when loaded according to the position as explained in the Measurement Conditions" paragraph. The SAR data are not affected by this change. The overal!l dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they mightbend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on May 04, 2015 Crtificate No: D5GHzV2—1238_Sep16 Page 10 of 16

— remernceronms nae wi 2 urve enc e n en se r s se 2. = I I Shonthen Academy of Information A h and Communications Technology tovgy se se e DASY5 Validation Report for Head TSL Date: 21.09.2016 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole DSGHzV2; Type: D5GHzV2; Serial: D5GHzV2 — SN:1238 Communication System: UID 0 — CW; Frequency: 5200 MHz, Frequency: 5300 MHz, Frequency: 5500 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; 0 = 4.54 S/m;&, = 34.6; p = 1000 kg/m3 Medium parameters used: f= 5300 MHz; 0 = 4.63 S/m; &, = 34.4; p = 1000 kg/m3 Medium parameters used: £= 5500 MHz; 0 = 4.83 S/m; &, = 34.2; p = 1000 kg/m3 Medium parameters used: f = 5600 MHz; 0 = 4.93 S/m; £, = 34.0; p = 1000 kg/m3 Medium parameters used: f= 5800 MHz; 0 = 5.14 S/m; &, = 33.7; p = 1000 kg/mx Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2011) DASY52 Configuration: + Probe: EX3DV4 — SN3503; ConvF(5.59, 5.59, 5.59); Calibrated: 30.06.2016, ConvF(5.14, 5.14, 5.14); Calibrated: 30.06.2016, ConvF(5.02, 5.02, 5.02); Calibrated: 30.06.2016, ConvF(4.89, 4.89, 4.89); Calibrated: 30.06.2016, ConvF(4.85, 4.85, 4.85); Calibrated: 30.06.2016; «_ Sensor—Surface: 1.4mm (Mechanical Surface Detection) + Electronics: DAE4 Sn601; Calibrated: 30.12.2015 + Phantom: Flat Phantom 5.0 (front); Type: QDOOOP50AA; Serial: 1001 «_ DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372) Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 70.35 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 27.9 W/kg SAR(I g) =7.76 W/kg; SAR(10 g) = 2.22 W/kg Maximum value of SAR (measured) = 17.9 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5300 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 72.80 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) =31.1 W/kg SAR(I g) = 8.38 W/kg; SAR(10 g) = 2.4 W/kg Maximum value of SAR (measured) = 19.5 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 70.90 V/m; Power Drift = —0.01 dB Peak SAR (extrapolated) = 31.9 W/kg SAR(I g) = 8.21 W/kg; SAR(10 g) = 2.34 W/kg Maximum value of SAR (measured) = 19.5 W/kg Certificate No: D5GHzV2—1238_Sep16 Page 11 of 16

= revomnmcrenace naw12 urve ppiibiibinicinihs Shenzhen Academy of Information and Communications Technology Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value =71.51 V/m; Power Drift = —0.00 dB Peak SAR (extrapolated) = 32.8 W/kg SAR(I g) = 8.38 W/kg; SAR(10 g) = 2.39 W/kg Maximum value of SAR (measured) = 20.0 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 69.07 V/m; Power Drift = —0.04 dB Peak SAR (extrapolated) = 32.5 W/kg SAR(I g) = 7.96 W/kg; SAR(10 g) = 2.26 W/kg Maximum value of SAR (measured) = 19.4 W/kg dB 0 —6.00 —12.00 —18.00 —24.00 —30.00 0 dB = 17.9 W/kg = 12.53 dBWikg " Certificate No: D5GHzV2—1238_Sep16 Page 12 of 16

— revomnncinsnace naew i2 urve Shenzhen Acadamy of Information and Communications Technology tomgy se n sn es Impedance Measurement Plot for Head TSL 13 Sep 2016 13:42i14 CBR sii i uors 41 47.074 a —5.7578 Moack6. 5.9157 pF 5 200.000 000 MHz J CH1L Markers Del 2 50.549 a A —3.2129 a gor [ « 5.30000 Cz | j a a49.995 a t ——y > 295952 a \| i 5.50000 GHz \ ' f 4149.961 a 0.6172 a fys 5.50000 GHz 5 55 Ee 5.30000 GHiz H1d MA cH2 gii Los 5 487 R‘;F —20 T@ y 41—23.554 aB 5 200.000900 mMHz . <I—<—<I—<t—<—tt—t5 | | f——+——+ 1——+——+t har | = T‘ — CH2 Markers tar f——=(————f—.—i +7 1 9 1 2~29.781 d8 L | J L A+ —L _4 _ 5.30000 Cz | | | [ 884194 dB ‘ ‘ f 5.s0000 GHz as: foof.._s_4 f* =—L 10 qr4di4nde fvg I 5.60000 GHz AF [ _O [ 5:—25.086 t—25. dB 1 ~*x—t * 4 7 590000 GHz H1d ———+ f—*» ———t Tv 7 | STaRt 5 000.000 000 Mz ~stor & 000.000 000 Niz Certificate No: DSGHzV2—1238_Sep16 Page 13 of 16

: ‘ I Shenzhen Academy of Information and Communications Technology t omgy yx yc e DASY5 Validation Report for Body TSL Date: 20.09.2016 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: DSGHzV2 — SN:1238 Communication System: UID 0 — CW; Frequency: 5200 MHz, Frequency: 5300 MHz, Frequency: 5500 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; 0 = 5.45 S/m; 8 = 47.5; p = 1000 kg/m3 Medium parameters used: f = 5300 MHz; 0 = 5.59 S/m; & = 47.3; p = 1000 kg/m3 Medium parameters used: f = 5500 MHz; 0 = 5.86 S/m; &, = 47.0; p = 1000 kg/m3 Medium parameters used: f = 5600 MHz; 0 = 6.00 S/m; &, = 46.8; p = 1000 kg/m3 Medium parameters used: f= 5800 MHz; 0 = 6.29 S/m; &, = 46.4; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2011) DASYS52 Configuration: * Probe: EX3DV4 — SN3503; ConvF(4.99, 4.99, 4.99); Calibrated: 30.06.2016, ConvF(4.75, 4.75, 4.75); Calibrated: 30.06.2016, ConyF(4.4, 4.4, 4.4); Calibrated: 30.06.2016, ConvF(4.35, 4.35, 4.35); Calibrated: 30.06.2016, ConvF(4.27, 4.27, 4.27); Calibrated: 30.06.2016; «+ Sensor—Surface: 1.4mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 30.12.2015 «+ Phantom: Flat Phantom 5.0 (back); Type: QDOOOPS50AA; Serial: 1002 + DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372) Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, f=5200MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.67 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 27.8 W/kg SAR(I g) = 7.48 W/kg; SAR(10 g) =2.1 W/kg Maximum value of SAR (measured) = 17.3 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5300 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 67.01 V/m; Power Drift = —0.06 dB Peak SAR (extrapolated) = 29.4 W/kg SAR(I g) = 7.69 W/kg; SAR(10 g) = 217 W/kg Maximum value of SAR (measured) = 18.0 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 67.20 V/m; Power Drift = —0.05 dB Peak SAR (extrapolated) = 32.4 W/kg SAR(1 g) = 8.03 W/kg; SAR(10 g) = 2.23 W/kg Maximum value of SAR (measured) = 19.2 W/kg Certificate No: DSGHzV2—1238_Sep16 Page 14 of 16

= revomnmcrenace naw12 urve ppiibiibinicinihs Shenzhen Academy of Information and Communications Technology Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.47 V/m; Power Drift = —0.07 dB Peak SAR (extrapolated) = 32.7 W/kg SAR(I g) =7.95 W/kg; SAR(10 g) = 2.23 W/kg Maximum value of SAR (measured) = 19.1 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Mcasurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 64.40 V/m; Power Drift = —0.08 dB Peak SAR (extrapolated) = 33.2 W/kg SAR(I g) = 7.66 W/kg; SAR(10 g) = 2.13 W/kg Maximum value of SAR (measured) = 18.8 W/kg dB 0 —6.00 —12.00 —18.00 —24.00 ~30.00 0 dB = 17.3 W/kg = 12.38 dBW/kg Certificate No: D5GHzV2—1238_Sep16 Page 15 of 16

22A I h Shenzhen Acadamy of Information and Communications Technology mnyy —> Impedance Measurement Plot for Body TSL 43 Sep 2016 13141126 CHZ sii i uo rs 1148.609 a —3.3730 sekd 0 90739 pF 5 200.000 000 MHz # CH1 Markers Del 2 49.556 a & ~2.3807 a 5.30000 GHz Con | ho Pss ——!——§# —:** 4 3 49.500 a 29392 o 5.50000 GHz f 24789 a Av ) 560000 GHz 16° * Sdbe & 5.80000 GHz H1d cH2 s1 Los _5 dB/REF —20 d8 L 11—28.644 aB _5 200.000 goo MHz T + + | + + } { + ———— % k — «e l { CH2 Markers | | — — —— — 4+ 4| 2—92.260 dB Corn | h | | T $.30000 GHz 4— — —+ + t——t + —| I I #—31.707 dB 5.50000 GHz T 41—31.738 dB & | 560000 GHz 1e° I 51—24.000 dB 5.80000 OHz H1d + I START 5 ©00.000 00 rHz SToP 6©20.000 a60 MHz Certificate No: D5GHzV2—1238_Sep16 Page 16 of 16

No.B18N00806-SAR Page 88 of 89 ANNEX J Extended Calibration SAR Dipole Referring to KDB865664 D01, if dipoles are verified in return loss ( <-20dBm, within 20% of prior calibration), and in impedance ( within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Justification of Extended Calibration SAR Dipole D2450V2– serial no.873 Head Real Imaginary Date of Return-Loss Delta Delta Delta Impedance Impedance Measurement (dB) (%) (ohm) (johm) (ohm) (johm) 2015-10-30 -26.6 53.4 3.42 2016-10-20 -25.1 5.6 55.1 1.7 2.91 0.51 2017-10-18 -25.7 3.4 54.6 0.8 3.04 0.38 Body Real Imaginary Date of Return-Loss Delta Delta Delta (%) Impedance Impedance Measurement (dB) (ohm) (johm) (ohm) (johm) 2015-10-30 -23.7 50.5 6.53 2016-10-20 -24.9 5.1 49.2 1.3 7.28 0.75 2017-10-18 -25.5 7.6 49.6 0.9 7.11 0.58

No.B18N00806-SAR Page 89 of 89 Justification of Extended Calibration SAR Dipole D5GHzV2– serial no.1238 Head Real Imaginary Date of Return-Loss Delta Delta Delta Frequency Impedance Impedance Measurement (dB) (%) (ohm) (johm) (ohm) (johm) 2016-9-21 5200MHz -23.6 47.1 5.8 2017-9-20 5200MHz -21.7 8.1 48.3 1.2 2.38 2.42 2016-9-21 5300MHz -29.8 50.5 3.2 2017-9-20 5300MHz -27.8 6.7 51.9 1.4 4.51 1.31 2016-9-21 5500MHz -31.2 49.0 2.5 2017-9-20 5500MHz -29.5 5.4 50.3 1.3 1.24 1.26 2016-9-21 5600MHz -44.1 50.0 0.6 2017-9-20 5600MHz -42.6 3.4 51.5 1.5 2.55 1.95 2016-9-21 5800MHz -25.1 55.6 1.9 2017-9-20 5800MHz -23.8 5.2 56.9 1.3 3.04 1.14 Body Real Imaginary Date of Return-Loss Delta Delta Delta Frequency Impedance Impedance Measurement (dB) (%) (ohm) (johm) (ohm) (johm) 2016-9-21 5200MHz -28.6 48.6 3.4 2017-9-20 5200MHz -26.4 7.7 50.0 1.4 3.72 0.32 2016-9-21 5300MHz -32.3 49.6 2.4 2017-9-20 5300MHz -30.5 5.6 51.3 1.7 3.64 1.24 2016-9-21 5500MHz -31.7 49.5 2.5 2017-9-20 5500MHz -29.8 6.0 51.4 1.9 4.25 1.75 2016-9-21 5600MHz -31.7 50.8 2.5 2017-9-20 5600MHz -29.5 6.9 52.3 1.5 2.91 0.41 2016-9-21 5800MHz -24.0 56.0 3.0 2017-9-20 5800MHz -22.8 5.0 57.3 1.3 4.23 1.23 The Return-Loss is <-20dB, and within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the value result should support extended c.


Document Created: 2018-07-19 17:09:58
Document Modified: 2018-07-19 17:09:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC