Test Report_Part 1 of 2

FCC ID: 2AOKTLSWU3

Test Report

Download: PDF
FCCID_3880888


Page 2 of 47 Report No.: 171208002RFC-1 Version Version No. Date Description V1.0 June 5, 2018 Original Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 3 of 47 Report No.: 171208002RFC-1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 5.1 CLIENT INFORMATION ........................................................................................................................................ 4 5.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES.............................................................................................................. 4 5.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 5.4 OTHER INFORMATION ......................................................................................................................................... 5 5.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5 5.6 TEST LOCATION ................................................................................................................................................. 5 5.7 TEST FACILITY ................................................................................................................................................... 5 5.8 DEVIATION FROM STANDARDS ............................................................................................................................ 6 5.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 6 5.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6 5.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 6 2. TEST SUMMARY ...................................................................................................................................................... 7 3. EQUIPMENT LIST .................................................................................................................................................... 8 4. TEST CONFIGURATION .......................................................................................................................................... 9 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ........................................................................................................ 9 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................... 9 4.1.2 RECORD OF NORMAL ENVIRONMENT....................................................................................................... 9 4.2 TEST CHANNELS ............................................................................................................................................... 9 4.3 EUT TEST STATUS ............................................................................................................................................ 9 4.4 PRE-SCAN ....................................................................................................................................................... 10 4.4.1 PRE-SCAN UNDER ALL RATES ................................................................................................................ 10 4.4.2 W ORST-CASE DATA RATES .................................................................................................................... 10 4.5 TEST SETUP .................................................................................................................................................... 10 4.5.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 10 4.5.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 12 4.5.3 FOR CONDUCTED RF TEST SETUP ........................................................................................................ 12 4.6 SYSTEM TEST CONFIGURATION ........................................................................................................................ 13 4.7 DUTY CYCLE ................................................................................................................................................... 13 5. RADIO TECHNICAL REQUIREMENTS SPECIFICATION .................................................................................... 16 5.1 REFERENCE DOCUMENTS FOR TESTING ............................................................................................................ 16 5.2 ANTENNA REQUIREMENT ................................................................................................................................. 16 5.3 CONDUCTED PEAK OUTPUT POWER ................................................................................................................. 17 5.4 6 DB BANDWIDTH ............................................................................................................................................ 18 5.5 POWER SPECTRAL DENSITY ............................................................................................................................ 21 5.6 CONDUCTED OUT OF BAND EMISSION .............................................................................................................. 24 5.7 RADIATED SPURIOUS EMISSIONS...................................................................................................................... 29 5.8 BAND EDGE MEASUREMENTS (RADIATED) ........................................................................................................ 35 5.9 CONDUCTED EMISSION .................................................................................................................................... 42 APPENDIX 1 PHOTOS OF TEST SETUP ..................................................................................................................... 45 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................. 47 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 4 of 47 Report No.: 171208002RFC-1 1. GENERAL INFORMATION 5.1 CLIENT INFORMATION Applicant: IOTTY SRL Address of Applicant: VIA DEL LAGHETTO 18/20 33080 PORCIA (PN) ITALY Manufacturer: IOTTY SRL Address of Manufacturer: VIA DEL LAGHETTO 18/20 33080 PORCIA (PN) ITALY 5.2 EUT INFORMATION 1.2.1 General Description of EUT Product Name: iotty Smart Switch Model No.: U3 Add. Model No.: U2 Trade Mark: iotty DUT Stage: Identical Prototype EUT Supports Function: 2.4 GHz ISM Band: IEEE 802.11b/g/n Software Version: Beta2 Hardware Version: D Sample Received Date: December 11, 2017 Sample Tested Date: December 22, 2017 to December 28, 2017 Note: The test data is gathered from a production sample, provided by the manufacturer. The appearance of others models listed in the report is different from main-test model U3, but the circuit and the electronic construction do not change, declared by the manufacturer. 1.2.2 Description of Accessories None 5.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD Frequency Range: 2400 MHz to 2483.5 MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n-HT20 IEEE 802.11b: DSSS(CCK, DQPSK, DBPSK) Type of Modulation: IEEE 802.11g: OFDM(64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n-HT20: OFDM(64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11b: Up to 11 Mbps Data Rate: IEEE 802.11g: Up to 54 Mbps IEEE 802.11n-HT20: Up to MCS7(64 Mbps) IEEE 802.11b: 11 Number of Channels: IEEE 802.11g: 11 IEEE 802.11n-HT20: 11 Channel Separation: 5 MHz Antenna Type: PCB Antenna Antenna Gain: 3 dBi IEEE 802.11b: 22.03 dBm Maximum Peak Power: IEEE 802.11g: 23.64dBm IEEE 802.11n-HT20: 23.52 dBm Normal Test Voltage: 120 Vac/60Hz Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 5 of 47 Report No.: 171208002RFC-1 5.4 OTHER INFORMATION Operation Frequency Each of Channel IEEE 802.11b, IEEE 802.11g, IEEE 802.11n-HT20 Channel Frequency Channel Frequency Channel Frequency Channel Frequency 1 2412 MHz 4 2427 MHz 7 2442 MHz 10 2457 MHz 2 2417 MHz 5 2432 MHz 8 2447 MHz 11 2462 MHz 3 2422 MHz 6 2437 MHz 9 2452 MHz -- -- 5.5 DESCRIPTION OF SUPPORT UNITS The EUT has been tested with associated equipment below. 1) Support Equipment Description Manufacturer Model No. Serial Number Supplied by Notebook Lenovo E450 SL10G10780 UnionTrust Lamp holder UnionTrust UTTlab013 UTTL-SN027 UnionTrust Bulb x 3 Sunlite 200W N/A UnionTrust 2) Support Cable Cable No. Description Connector Length Supplied by 1 Antenna Cable SMA 0.30 Meter UnionTrust 2 AC Cable L/N 1.2 Meter UnionTrust 5.6 TEST LOCATION Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China 518109 Telephone: +86 (0) 755 2823 0888 Fax: +86 (0) 755 2823 0886 5.7 TEST FACILITY The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L9069 The measuring equipment utilized to perform the tests documented in this report has been calibrated once a year or in accordance with the manufacturer's recommendations, and is traceable under the ISO/IEC/EN 17025 to international or national standards. Equipment has been calibrated by accredited calibration laboratories. IC-Registration No.: 21600-1 The 3m Semi-anechoic chamber of Shenzhen UnionTrust Quality and Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 21600-1. A2LA-Lab Certificate No.: 4312.01 Shenzhen UnionTrust Quality and Technology Co., Ltd. has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 6 of 47 Report No.: 171208002RFC-1 Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC Accredited Lab. Designation Number: CN1194 Test Firm Registration Number: 259480 5.8 DEVIATION FROM STANDARDS None. 5.9 ABNORMALITIES FROM STANDARD CONDITIONS None. 5.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER None. 5.11 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the Product as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. No. Item Measurement Uncertainty 1 Conducted emission 9KHz-150KHz ±3.8 dB 2 Conducted emission 150KHz-30MHz ±3.4 dB 3 Radiated emission 9KHz-30MHz ±4.9 dB 4 Radiated emission 30MHz-1GHz ±4.7 dB 5 Radiated emission 1GHz-18GHz ±5.1 dB 6 Radiated emission 18GHz-26GHz ±5.2 dB 7 Radiated emission 26GHz-40GHz ±5.2 dB Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 7 of 47 Report No.: 171208002RFC-1 2. TEST SUMMARY FCC 47 CFR Part 15 Subpart C Test Cases Test Item Test Requirement Test Method Result FCC 47 CFR Part 15 Subpart C Section Antenna Requirement ANSI C63.10-2013 PASS 15.203/15.247 (c) AC Power Line FCC 47 CFR Part 15 Subpart C Section ANSI C63.10-2013 PASS Conducted Emission 15.207 Conducted Peak FCC 47 CFR Part 15 Subpart C Section KDB 558074 D01 v04 PASS Output Power 15.247 (b)(3) Section 9.1.3 FCC 47 CFR Part 15 Subpart C Section KDB 558074 D01 v04 6dB Bandwidth PASS 15.247 (a)(2) Section 8.1 Power Spectral FCC 47 CFR Part 15 Subpart C Section KDB 558074 D01 v04 PASS Density 15.247 (e) Section 10.2 Conducted Out of FCC 47 CFR Part 15 Subpart C Section KDB 558074 D01 v04 PASS Band Emission 15.247(d) Section 11 Radiated Spurious FCC 47 CFR Part 15 Subpart C Section KDB 558074 D01 v04 PASS Emissions 15.205/15.209 Section 12.1 Band Edge FCC 47 CFR Part 15 Subpart C Section KDB 558074 D01 v04 Measurements PASS 15.205/15.209 Section 12.1 (Radiated) Note: 1) N/A: In this whole report not application. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 8 of 47 Report No.: 171208002RFC-1 3. EQUIPMENT LIST Radiated Emission Test Equipment List Serial Cal. date Cal. Due date Used Equipment Manufacturer Model No. Number (mm dd, yyyy) (mm dd, yyyy) 3M Chamber & ETS-LINDGREN 3M N/A Dec. 20, 2015 Dec. 19, 2018 Accessory Equipment Receiver R&S ESIB26 100114 Dec. 10, 2017 Dec. 10, 2018 Broadband Antenna ETS-LINDGREN 3142E 00201566 Dec.17, 2017 Dec. 17, 2018 Preamplifier HP 8447F 2805A02960 Dec.10, 2017 Dec. 10, 2018 Horn Antenna ETS-LINDGREN 3117-PA 00201874 Dec. 30, 2016 Dec. 30, 2017 (Pre-amplifier) Multi device ETS-LINDGREN 7006-001 00160105 N/A N/A Controller Band Rejection Filter Micro-Tronics BRM50702 G248 Jun. 21, 2017 Jun. 20, 2018 (2400MHz~2500MHz) Test Software Audix e3 Software Version: 9.160323 Conducted Emission Test Equipment List Serial Cal. date Cal. Due date Used Equipment Manufacturer Model No. Number (mm dd, yyyy) (mm dd, yyyy) 1316.3003K07 Receiver R&S ESR7 Dec. 10, 2017 Dec. 10, 2018 -101181-K3 Pulse Limiter R&S ESH3-Z2 0357.8810.54 Dec. 10, 2017 Dec. 10, 2018 LISN R&S ESH2-Z5 860014/024 Dec. 10, 2017 Dec. 10, 2018 Test Software Audix e3 Software Version: 9.160323 Conducted RF test Equipment List Serial Cal. date Cal. Due date Used Equipment Manufacturer Model No. Number (mm dd, yyyy) (mm dd, yyyy) EXA Spectrum KEYSIGHT N9010A MY51440197 Dec. 10, 2017 Dec. 10, 2018 Analyzer USB Wideband KEYSIGHT U2021XA MY55430035 Dec. 10, 2017 Dec. 10, 2018 Power Sensor USB Wideband KEYSIGHT U2021XA MY55430023 Dec. 10, 2017 Dec. 10, 2018 Power Sensor Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 9 of 47 Report No.: 171208002RFC-1 4. TEST CONFIGURATION 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING 4.1.1 Normal or Extreme Test Conditions Environment Parameter Selected Values During Tests Ambient Test Condition Temperature (°C) Voltage (Vac) Relative Humidity (%) NT/NV +15 to +35 120 20 to 75 Remark: 1) NV: Normal Voltage; NT: Normal Temperature 4.1.2 Record of Normal Environment Temperature Relative Humidity Pressure Test Item Tested by (°C) (%) (Kpa) AC Power Line Conducted 23.6 43 100.2 Andy Lin Emission Conducted Peak Output 23.4 31 100.2 Fire Huo Power 6dB Bandwidth 23.4 31 100.2 Fire Huo Power Spectral Density 23.4 31 100.2 Fire Huo Conducted Out of Band 23.4 31 100.2 Fire Huo Emission Radiated Spurious 20.9 58 100.6 Tony Kang Emissions Band Edge Measurements 20.9 58 100.6 Tony Kang (Radiated) 4.2 TEST CHANNELS Test RF Channel Lists Mode Tx/Rx Frequency Lowest(L) Middle(M) Highest(H) Channel 1 Channel 6 Channel 11 IEEE 802.11b 2412 MHz to 2462 MHz 2412 MHz 2437 MHz 2462 MHz Channel 1 Channel 6 Channel 11 IEEE 802.11g 2412 MHz to 2462 MHz 2412 MHz 2437 MHz 2462 MHz Channel 1 Channel 6 Channel 11 IEEE 802.11n-HT20 2412 MHz to 2462 MHz 2412 MHz 2437 MHz 2462 MHz 4.3 EUT TEST STATUS Mode Tx Function Description IEEE 802.11b 1. Keep the EUT in continuously transmitting with modulation IEEE 802.11g 1Tx test single. IEEE 802.11n-HT20 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 10 of 47 Report No.: 171208002RFC-1 4.4 PRE-SCAN 4.4.1 Pre-scan under all rates Mode and Maximum Conducted Average Power (dBm) Frequency 1 2 5.5 11 IEEE 802.11b 18.17 18.13 18.16 18.16 2437 MHz IEEE 802.11g 6 9 12 18 24 36 48 54 2437 MHz 16.72 16.69 16.69 16.58 16.63 16.67 15.41 14.97 IEEE 802.11n-HT20 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 2437MHz 16.72 16.68 16.59 16.60 16.71 15.57 15.07 13.24 4.4.2 Worst-case data rates Mode Worst-case data rates IEEE 802.11b 1 Mbps IEEE 802.11g 6 Mbps IEEE 802.11n-HT20 MCS0 4.5 TEST SETUP 4.5.1 For Radiated Emissions test setup Figure 1. Below 30MHz Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 11 of 47 Report No.: 171208002RFC-1 Figure 2. 30MHz to 1GHz Figure 3. Above 1GHz Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 12 of 47 Report No.: 171208002RFC-1 4.5.2 For Conducted Emissions test setup Figure 4. Conducted Emissions setup 4.5.3 For Conducted RF test setup Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 13 of 47 Report No.: 171208002RFC-1 4.6 SYSTEM TEST CONFIGURATION For emissions testing, the equipment under test (EUT) setup to transmit continuously to simplify the measurement methodology. Care was taken to ensure proper power supply voltages during testing. During testing, radiated emission were performed with the EUT set to transmit at the channel with highest output power as worst-case scenario. It was powered by a 120Vac. Only the worst case data were recorded in this test report. The signal is maximized through rotation and placement in the three orthogonal axes. The antenna height and polarization are varied during the search for maximum signal level. The antenna height is varied from 1 to 4 meters. Radiated emissions are taken at three meters unless the signal level is too low for measurement at that distance. If necessary, a pre-amplifier is used and/or the test is conducted at a closer distance. Therefore, all final radiated testing was performed with the EUT in (see table below) orientation. Worst-case axis Frequency Mode Antenna Port positioning Above 1GHz 1TX Chain 0 Y axis All readings are extrapolated back to the equivalent three meter reading using inverse scaling with distance. Analyzer resolution is 100 kHz or greater for frequencies below 1000 MHz. The resolution is 1 MHz or greater for frequencies above 1000 MHz. The spurious emissions more than 20 dB below the permissible value are not reported. Radiated emission measurement were performed from the lowest radio frequency signal generated in the device which is greater than 9 kHz to the tenth harmonic of the highest fundamental frequency or to 40 GHz, whichever is lower. 4.7 DUTY CYCLE Data 1/ T On Time Period Duty Cycle Duty Cycle Duty Cycle Average Mode rates Minimum (msec) (msec) (linear) (%) Factor (dB) Factor (dB) (Mbps) VBW (kHz) IEEE 802.11b 1 4.187 4.71 0.89 88.90 0.51 0.24 -1.02 IEEE 802.11g 6 0.69 0.795 0.87 86.79 0.62 1.45 -1.23 IEEE 802.11n-HT20 MCS0 0.654 0.756 0.87 86.51 0.63 1.53 -1.26 Remark: 1) Duty cycle= On Time/ Period; 2) Duty Cycle factor = 10 * log(1/ Duty cycle); 3) Average factor = 20 log10 Duty Cycle. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 14 of 47 Report No.: 171208002RFC-1 The test plot as follows IEEE 802.11b IEEE 802.11g Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 15 of 47 Report No.: 171208002RFC-1 IEEE 802.11n-HT20 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 16 of 47 Report No.: 171208002RFC-1 5. RADIO TECHNICAL REQUIREMENTS SPECIFICATION 5.1 REFERENCE DOCUMENTS FOR TESTING No. Identity Document Title Frequency allocations and radio treaty matters; general rules and 1 FCC 47 CFR Part 2 regulations 2 FCC 47 CFR Part 15 Radio Frequency Devices American National Standard for Testing Unlicesed Wireless 3 ANSI C63.10-2013 Devices KDB 558074 D01 DTS Meas Guidance for Performing Compliance Measurements on Digital 4 Guidance v04 Transmission Systems (DTS) Operating Under §15.247 5.2 ANTENNA REQUIREMENT Standard Requirement 15.203 requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 15.247(b) (4) requirement: The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. EUT Antenna: Antenna in the interior of the equipment and no consideration of replacement. The gain of the antenna is 3 dBi. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 17 of 47 Report No.: 171208002RFC-1 5.3 CONDUCTED PEAK OUTPUT POWER Test Requirement: FCC 47 CFR Part 15 Subpart C Section15.247 (b)(3) Test Method: KDB 558074 D01 v04, Section 9.1.3 Limit: For systems using digital modulation in the 2400-2483.5 MHz bands: 1 Watt. Test Procedure: 1. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the power meter. 2. Measure out each test modes’ peak or average output power, record the power level. Note: The cable loss and attenuator loss were offset into measure device as an amplitude offset. Test Setup: Refer to section 4.4.3 for details. Instruments Used: Refer to section 3 for details Test Mode: Transmitter mode Test Results: Pass Test Data: Maximum Conducted Power (dBm) Channel/ Data Rate Average Power Mode Frequency (Mbps) Peak Power Measured Power with (MHz) Power Duty Factor 1(2412) 22.03 18.24 18.75 IEEE 802.11b 6(2437) 1 21.96 18.17 18.68 11(2462) 21.63 17.90 18.41 1(2412) 23.64 16.73 17.35 IEEE 802.11g 6(2437) 6 23.58 16.72 17.07 11(2462) 23.30 16.25 16.87 1(2412) 23.52 16.73 17.36 IEEE 802.11n-HT20 6(2437) MCS0 23.47 16.72 17.35 11(2462) 23.16 16.22 16.85 Remark: Power with Duty Factor = Measured Power + Duty Cycle Factor Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 18 of 47 Report No.: 171208002RFC-1 5.4 6 DB BANDWIDTH Test Requirement: FCC 47 CFR Part 15 Subpart C Section 15.247 (a)(2) Test Method: KDB 558074 D01 v04, Section 8.1 Limit: For direct sequence systems, the minimum 6dB bandwidth shall be at least 500kHz Test Procedure: Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. Use the following spectrum analyzer settings: a) Set RBW = 100 kHz. b) Set the video bandwidth (VBW) ≥ 3 x RBW. c) Detector = Peak. d) Trace mode = max hold. e) Sweep = auto couple. f) Allow the trace to stabilize. g) Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. Note: The cable loss and attenuator loss were offset into measure device as an amplitude offset. Test Setup: Refer to section 4.4.3 for details. Instruments Used: Refer to section 3 for details Test Mode: Transmitter mode Test Results: Pass Test Data: Channel/ 6 dB 99% 6 dB Mode Frequency Bandwidth Bandwidth Bandwidth Pass / Fail (MHz) (MHz) (MHz) Limit 1(2412) 8.126 10.556 > 500 kHz Pass IEEE 802.11b 6(2437) 8.127 10.547 > 500 kHz Pass 11(2462) 8.117 10.513 > 500 kHz Pass 1(2412) 16.37 16.386 > 500 kHz Pass IEEE 802.11g 6(2437) 16.37 16.385 > 500 kHz Pass 11(2462) 16.37 16.380 > 500 kHz Pass 1(2412) 16.71 17.549 > 500 kHz Pass IEEE 802.11n-HT20 6(2437) 16.71 17.553 > 500 kHz Pass 11(2462) 16.71 17.548 > 500 kHz Pass Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 19 of 47 Report No.: 171208002RFC-1 The test plot as follows: IEEE 802.11b IEEE 802.11g Lowest Channel Middle Channel Highest Channel Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 20 of 47 Report No.: 171208002RFC-1 IEEE 802.11n-HT20 Lowest Channel Middle Channel Highest Channel N/A Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 21 of 47 Report No.: 171208002RFC-1 5.5 POWER SPECTRAL DENSITY Test Requirement: FCC 47 CFR Part 15 Subpart C Section 15.247 (e) Test Method: KDB 558074 D01 v04, Section 10.2 Limit: For digitally modulated systems, the power spectral density conducted from the intentional radiator to the antenna shall not be greater than 8dBm in any 3kHz band during any time interval of continuous transmission. Test Procedure: Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. Use the following spectrum analyzer settings: a) Set analyzer center frequency to DTS channel center frequency. b) Set the span to 1.5 times the DTS bandwidth. c) Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. d) Set the VBW ≥ 3 x RBW. e) Detector = peak. f) Sweep time = auto couple. g) Trace mode = max hold. h) Allow trace to fully stabilize. i) Use the peak marker function to determine the maximum amplitude level within the RBW. j) If measured value exceeds limit, reduce RBW (no less than 3 kHz) and repeat. Note: The cable loss and attenuator loss were offset into measure device as an amplitude offset. Test Setup: Refer to section 4.4.3 for details. Instruments Used: Refer to section 3 for details Test Mode: Transmitter mode Test Results: Pass Test Data: Channel/ Mode PSD (dBm) PSD Limit (dBm) Pass / Fail Frequency (MHz) 1(2412) -5.175 8 Pass IEEE 802.11b 6(2437) -4.767 8 Pass 11(2462) -4.908 8 Pass 1(2412) -9.330 8 Pass IEEE 802.11g 6(2437) -9.377 8 Pass 11(2462) -9.329 8 Pass 1(2412) -9.459 8 Pass IEEE 802.11n-HT20 6(2437) -9.769 8 Pass 11(2462) -9.993 8 Pass Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 22 of 47 Report No.: 171208002RFC-1 The test plot as follows: IEEE 802.11b IEEE 802.11g Lowest Channel Middle Channel Highest Channel Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 23 of 47 Report No.: 171208002RFC-1 IEEE 802.11n-HT20 Lowest Channel Middle Channel Highest Channel N/A Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 24 of 47 Report No.: 171208002RFC-1 5.6 CONDUCTED OUT OF BAND EMISSION Test Requirement: FCC 47 CFR Part 15 Subpart C Section 15.247(d) Test Method: KDB 558074 D01 v04, Section 11 Limit: In any 100kHz bandwidth outside the frequency bands in which the spread spectrum intentional radiator in operating, the radio frequency power that is produced by the intentional radiator shall be at least 20dB below that in the 100kHz bandwidth within the band that contains the highest level of the desired power. Test Procedure: Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. Use the following spectrum analyzer settings: Step 1:Measurement Procedure REF a) Set instrument center frequency to DTS channel center frequency. b) Set the span to ≥ 1.5 times the DTS bandwidth. c) Set the RBW = 100 kHz. d) Set the VBW ≥ 3 x RBW. e) Detector = peak. f) Sweep time = auto couple. g) Trace mode = max hold. h) Allow trace to fully stabilize. i) Use the peak marker function to determine the maximum PSD level. j) Note that the channel found to contain the maximum PSD level can be used to establish the reference level. Step 2:Measurement Procedure OOBE a) Set RBW = 100 kHz. b) Set VBW ≥ 300 kHz. c) Detector = peak. d) Sweep = auto couple. e) Trace Mode = max hold. f) Allow trace to fully stabilize. g) Use the peak marker function to determine the maximum amplitude level. Note: The cable loss and attenuator loss were offset into measure device as an amplitude offset. Test Setup: Refer to section 4.4.3 for details. Instruments Used: Refer to section 3 for details Test Mode: Transmitter mode Test Results: Pass Test Data: Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 25 of 47 Report No.: 171208002RFC-1 The test plot as follows: IEEE 802.11b In-Band Reference Level Out of Band Emission Lowest Channel Middle Channel Highest Channel Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com


Document Created: 2018-06-08 18:13:53
Document Modified: 2018-06-08 18:13:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC