User Manual

FCC ID: 2AOKTLSWU3

Users Manual

Download: PDF

FCCID_3880883

1 Main power switch
2 Line Neutral 3 RL1
N
L
Lin
e

Lo
ad
4 5 6 Main power switch

ON ON

al
al utr
ner
Ge ne
Ne OFF OFF
li

ON ON Lin
e

e
vic
De
w
Ne
Ne
RL1 utr
al
Load
OFF OFF N
L Lo
ad
T
AR
al ST

Switch Ne
utr
Push all the wires back into the wall box
(Line/Load)
Connect Neutral wires together. and try to allow as much Turn on the power at the circuit breaker.
Each RL has two wires, connect one to the space for the switch as possible. Attach your iotty Light Switch faceplate Download the iotty app and sign in.
Turn off the power at the circuit breaker Remove your old switch and label your wires.
Load and the other to the General Line Place the iotty Light Switch into the box starting from one of the two short side. Connect to your iotty Light Switch wifi
for the switch you are replacing. Remember that you must have a Neutral wire
together with the iotty wire labeled with L. In and screw in. Place the two black buttons To remove use a screwdriver to lift [IOTTY_serial-number].
to install iotty Light Switch.
case you found the ground wire, just place it into the wall box. down (or right if you have multiple gangs) the faceplate. Now go to the app and add a new device.
WARNING: Electrical wirings of the iotty Light Switch should be done by a professional electrician. Incorrect installation is dangerous or illegal. Please call a professional electrician if you are unfamiliar or uncomfortable with electrical work.

How to install a multiple gang iotty Light Switch: In both cases start with steps 1 and 2 How to install a multiple gang iotty Light Switch Remember:
If you are connecting a three gangs switch you won’t be able to use one of the tree
as a 2 way switch application (to control a load gangs.
A) In case of loads operating at B) In case of loads operating at A) from two point). If you are making a 2 ways between two switches, one mechanical and one iotty,
the same voltage than iotty. different voltages than iotty.
Connect the Neutral wires together. Instructions on the next page. you won’t be able to control the iotty from the app, you will lose all smart functions.
[For the instructions of this case go to www.iotty.com/support]
Connect the General line wire, labeled with L, with
Start with steps 1 and 2.

1
i1 i2

1
one of the two wires that come out from each RL, Choose which iotty will become i1 andv i2.

1
2
3

RL1
together with the general wire from your wall.

RL1
iotty 1 (i1):

RL2
Connect each of the other wire of the RL with

RL2
2 Connect the Neutral wires together.

L N RL3
3

iotty
2 Connect the General line wire with one of the two wires that

L N RL3
3 each load you want to control.
come out from each RL, together with the General wire from
more info at:

L
L N RL3 RL2 RL1
L N RL3 RL2 RL1
your wall.
B) Connect the other wire of RL1 with the RL2 of i2 and RL2 with
www.iotty.com/support Connect the Neutral wires together. the RL1 of i2.
Light Switch
Overview of a iotty Connect the General line wire with the line of
i1
iotty 2 (i2):
2
Light Switch with in the wall. fi
1
RL
Connect the Neutral wire together.
Line 1o
multiple gangs. LN RL3 RL2 RL1 Every RL has two wires, connect one to the N
eu
RL Connect the General line wire with the General wire from
external power supply (necessary if it has tr your wall.
al tral Connect one of the two wires that come out from each RL with
Neu
ge Line different voltage from the general line), Lin
e RL1 of i2 the Load you want to control.
n Line
lin eral Load
Connect the other wire to the load. ad
e Line Lo Connect the other wire of RL1 with the RL2 of i1 and RL2 with
RL
Light 1 Light 3 Load
2o
fi
the RL1 of i1.
Ne 2
Load
Light 2 ut
ra
l
In both cases finish following steps 4, 5 and 6. Now follow steps 4, 5, 6. Set the light in each iotty as Deviator.

WARNING: Electrical wirings of the iotty Light Switch should be done by a professional electrician. Incorrect installation is dangerous or illegal. Please call a professional electrician if you are unfamiliar or uncomfortable with electrical work.

Document Created: 2017-11-30 15:44:24
Document Modified: 2017-11-30 15:44:24

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC