User Manual

FCC ID: 2AOKI-WFM601UWS2

Users Manual

Download: PDF
FCCID_3911024

WF-M601-UWS2 Wireless Module IEEE 802.11b/g/n 1T1R USB WiFi Module Features：  Reserving System IEEE Std. 802.11b IEEE Std. 802.11g IEEE Std. 802.11n  Chip Solution WIFI ：MTK MT7601UN/B  Size 28.0mm*16.0mm*6.0mm Model Overview： Power Module Installation Standard Rate Band Supply WF-M601-UWS2 SMT IEEE 802.11b/g/n 150Mbps 2.4 GHz 3.3V Sichuan AI-Link Technology Co.,Ltd Add: Anzhou,Industrial park,Mianyang,Sichuan Web: www.changhong.com Phone：13881190925

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module Feedback of customer’s Confirmation We accept the specification after Confirmed Customer name Customer signature Confirmation Date Please feed back this paper and first paper after your signature by the address,thanks! ADD： Anzhou,Industrial park,Mianyang,Sichuan Factory： Sichuan AI-Link Technology Co.,Ltd. Approved Checked Designed Product WiFi Module Model WF-M601-UWS2 Date 2018-03-02 Sichuan AI-Link Technology Co., Ltd. page 2 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module Record of Modification Date of Main content of Reason of Serial number of No Confirm modification modification modification modification A 20180302 Original Release Feng Jie Sichuan AI-Link Technology Co., Ltd. page 3 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module 1. Brief description: WIFI MODULE WF-M601-UWS2 is based on MTK MT7601UN/B complied with IEEE 802.11b/g/n standard from 2.4GHz-2.5GHz.Supported for 150Mbps high speed wireless network connection. 2. Package outline and Mounting: Bottom View Side View NOTE1:General tolerance ±0.2mm unless otherwise stated Sichuan AI-Link Technology Co., Ltd. page 4 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module 3. Pin Definition: Pin Symbol Description 1、2、5 GND Connected to Ground 3 WOW Wake WLAN 4 RST Reset the WLAN 6 D+ USB Data DP 7 D- USB Data DN 8 VDD +3.3V DC Power supply input 9、10 GND Connected to Ground Top View Pin Definition 4. Product Picture TOP VIEW BOTTOM VIEW Silkscreen Description： 1.The characters in the red block are PCB P/N; 2.The characters in the green block are PCB flame retardant grade; 3.The characters in the yellow block are PCB batch number; Sichuan AI-Link Technology Co., Ltd. page 5 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module 5. Key Materials： Item Sorts MPN Description MFR Notes 1 IC MT7601UN/B 40-QFN MTK Sunlodrd 2 PCB JUI7.820.0295 FR-4,2LAY IQPCB SHPCB JWT 3 Crystal E3SB40E00001BE 40M Hosonic H.ELE. 6. General Requirements: No. Feature Description 7-1 Operation Voltage 3.3V+/-0.3 Total3.3V@Max 410mA 7-2 Current Consumption BW 40 MHZ@13dbm 7-3 Operation Temperature 0°C to +60°C 7-4 Antenna Type Integral antenna 7-5 USB High Speed USB 2.0 Interface 7-6 Storage Temperature -25°C to +85°C 7. Recommend Layout： （unit：mm） Sichuan AI-Link Technology Co., Ltd. page 6 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module 8. Electrical Characteristics: 8-1 IEEE 802.11b Section: Items Contents Specification IEEE802.11b Mode CCK Channel CH1 to CH13 Data rate 1, 2, 5.5, 11Mbps Min. Typ. Max. Unit Remark TX Characteristics 1. Power Levels(Calibrated) 1) For Each antenna port 15.5 17 18.5 dBm 2. Spectrum Mask @ target power 1) fc +/-11MHz to +/-22MHz - - -30 dBr 2) fc > +/-22MHz - - -50 dBr 3 Constellation Error(EVM)@ target power 1) 1Mbps - - -10 dB 2) 2Mbps - - -10 dB 3) 5.5Mbps - - -10 dB 4) 11Mbps - -10 dB 4. Frequency Error -10 -5 10 ppm RX Characteristics Min. Typ. Max. Unit 5 Minimum Input Level Sensitivity(each chain) 1) 1Mbps (FER ≦8%) - -83 dBm 2) 2Mbps (FER ≦8%) - -80 dBm 3) 5.5Mbps (FER ≦8%) - -79 dBm 4) 11Mbps (FER ≦8%) - -76 dBm 6 Maximum Input Level (FER ≦8%) -10 - - dBm Sichuan AI-Link Technology Co., Ltd. page 7 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module 8-2 IEEE 802.11g Section: Items Contents Specification IEEE802.11g Mode OFDM Channel CH1 to CH13 Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps Min. Typ. Max. Unit Remark TX Characteristics 1. Power Levels 1) For Each antenna port 13.5 15 16.5 dBm 2. Spectrum Mask @ target power 1) at fc +/-11MHz - - -20 dBr 2) at fc +/-20MHz - - -28 dBr 3) at fc > +/-30MHz - - -40 dBr 3 Constellation Error(EVM)@ target power 1) 6Mbps - - -5 dB 2) 9Mbps - - -8 dB 3) 12Mbps - - -10 dB 4) 18Mbps - - -13 dB 5) 24Mbps - - -16 dB 6) 36Mbps - - -19 dB 7) 48Mbps - - -22 dB 8) 54Mbps - -25 dB 4 Frequency Error -10 -5 10 ppm RX Characteristics Min. Typ. Max. Unit 5 Minimum Input Level Sensitivity(each chain) 1) 6Mbps (PER ≦10%) - -85 dBm 2) 9Mbps (PER ≦10%) - -84 dBm 3) 12Mbps (PER ≦10%) - -82 dBm 4) 18Mbps (PER ≦10%) - -80 dBm 5) 24Mbps (PER ≦10%) - -77 dBm 6) 36Mbps (PER ≦10%) - -73 dBm 7) 48Mbps (PER ≦10%) - -69 dBm 8) 54Mbps (PER ≦10%) - -65 dBm 6 Maximum Input Level (PER ≦10%) -20 - - dBm Sichuan AI-Link Technology Co., Ltd. page 8 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module 8-3 IEEE 802.11n HT20 Section: Items Contents Specification IEEE802.11n HT20 @ 2.4GHz Mode OFDM Channel CH1 to CH13 Data rate (MCS index) MCS0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15 Min. Typ. Max. Unit Remark TX Characteristics Min. Typ. Max. Unit 2. Power Levels 1) For Each antenna port 13.5 15 16.5 dBm 3. Spectrum Mask @14.5dBm 1) at fc +/-11MHz - - -20 dBr 2) at fc +/-20MHz - - -28 dBr 3) at fc > +/-30MHz - - -45 dBr 4. Constellation Error(EVM)@ target power 1) MCS0 - - -5 dB 2) MCS1 - - -10 dB 3) MCS2 - - -13 dB 4) MCS3 - - -16 dB 5) MCS4 - - -19 dB 6) MCS5 - - -22 dB 7) MCS6 - - -25 dB 8) MCS7 - -28 dB 5. Frequency Error -10 - 10 ppm RX Characteristics Min. Typ. Max. Unit 6. Minimum Input Level Sensitivity(each chain) 1) MCS0 (PER ≦10%) - -82 dBm 2) MCS1 (PER ≦10%) - -79 dBm 3) MCS2 (PER ≦10%) - -77 dBm 4) MCS3 (PER ≦10%) - -74 dBm 5) MCS4 (PER ≦10%) - -70 dBm 6) MCS5 (PER ≦10%) - -66 dBm 7) MCS6 (PER ≦10%) - -65 dBm 8) MCS7 (PER ≦10%) - -64 dBm 7. Maximum Input Level (PER ≦10%) -20 - - dBm Sichuan AI-Link Technology Co., Ltd. page 9 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module 8-4 IEEE 802.11n HT40 Section: Items Contents Specification IEEE802.11n HT40 @ 2.4GHz Mode OFDM Channel CH3 to CH11 Data rate (MCS index) MCS0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15 Min. Typ. Max. Unit Remark TX Characteristics Min. Typ. Max. Unit 1. Power Levels (Calibrated) 1) For Each antenna port 13.5 15 16.5 dBm 2. Spectrum Mask @13dBm 1) at fc +/-22MHz - - -20 dBr 2) at fc +/-40MHz - - -28 dBr 3) at fc > +/-60MHz - - -45 dBr 3. Constellation Error(EVM)@target power 1) MCS0 - - -5 dB 2) MCS1 - - -10 dB 3) MCS2 - - -13 dB 4) MCS3 - - -16 dB 5) MCS4 - - -19 dB 6) MCS5 - - -22 dB 7) MCS6 - - -25 dB 8) MCS7 - -28 dB 4. Frequency Error -10 -5 10 ppm RX Characteristics Min. Typ. Max. Unit 5. Minimum Input Level Sensitivity(each chain) 1) MCS0 (PER ≦10%) -79 dBm 2) MCS1 (PER ≦10%) -76 dBm 3) MCS2 (PER ≦10%) -74 dBm 4) MCS3 (PER ≦10%) -71 dBm 5) MCS4 (PER ≦10%) -67 dBm 6) MCS5 (PER ≦10%) -63 dBm 7) MCS6 (PER ≦10%) -62 dBm 8) MCS7 (PER ≦10%) - -61 dBm 6. Maximum Input Level(PER ≦10%) -20 - - dBm Sichuan AI-Link Technology Co., Ltd. page 10 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module 9. Software Requirements The driver supports the following operating systems: Linux, Microsoft Windows XP, Vista and Win7. Mfg. software tool version is MT7601 USB QA V1.0.9.0 or later. 10. Refelow Standard Condition 11. Mechanical, Environmental and Reliability Tests Test Items Test Conditions Qty Criteria Condition The packed samples within 100Kg can be tested Drop height: After drop test, the outer box and inner box will 4-1 Drop test Face Side: 800/600/450mm 1xBox not been broken by appearance visual Edge line: 600/450/350mm inspection. Drop time: 1 each Face and edge. X-Y-Z direction, first Frequency changing from 10Hz to 30Hz to 10Hz After test, the Appearance, Power EVM and ,amplitude 0.75mm, 5 times 4-2 Vibration test 3 Frequency error shall be satisfied with the vibrations, then frequency specification. Changing from 30Hz to 55 Hz to 30 Hz, amplitude 0.15mm, 5 time vibration. Impact acceleration: After test, the Appearance, Power EVM and 50m/sec2; 4-3 Impact test 3 Frequency error shall be satisfied with the Impact duration: 16ms； specification. Impact times: 1000. Sichuan AI-Link Technology Co., Ltd. page 11 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module 1. After soldering, the soldered area must be Soldering temperature: covered by a smooth bright solder layer, some Soldering ability 235±5℃ deficiencies such as a small amount of the 4-4 test Soldering duration: 3 pinhole, not wetting are allowed, but the 2±0.5S deficiencies can not be in the same place； 2. At least 90% of soldered area shall be covered continuously by the soldering material. Leave samples in standard test condition for 2 4-5 Humidity test Leave samples in 40±3℃, 3 hours then test, the Appearance, Power, EVM 93% RH @ 96 hours and Frequency error functional parameter shall be satisfied with the test specification. Thermostat cabinet temperature: 55±5℃ High temperature Applied voltage: After test, leave samples in standard condition 4-6 load life test 110% rated voltage 60 for 1 hour and test, Power, EVM and Frequency Working duration: 200 hour error shall be satisfied with the test specification. (Supply Voltage Cycle 23h power on, 1h power off) High temperature Temperature: 55±5℃ After test, the Appearance, Power, EVM and 4-7 load test Samples work for 16 hours 3 Frequency error shall be Satisfied with the test specification. Leave samples in standard test condition for 2 4-8 Low temperature Leave the samples in 3 hours then test, the Appearance, Power, EVM storage test -25±3℃@24 hours and Frequency error shall be satisfied with the test specification. Leave samples in After test, leave the samples in standard Low temperature -15±3℃@ 2 hours, condition and tested the Appearance, Power, 4-9 load test samples’ function 3 EVM and Frequency error shall be satisfied with shall be normal, the let the test specification. samples work for 1 hour One cycle duration After test, leave the samples in standard 4-10 Temperature circle -10±3℃ @3H 3 condition and tested Power EVM and Frequency test 40±3℃ @3H error shall be qualified and all the characters Total cycle: 10x shall be satisfied with the test specification. Twice cycle duration During test, There will not been appeared signal 4-11 Continuous -10±3℃@4H 3 disconnection or interruption between DUT and TP test +60±3℃@4H, AP. +25@2H@2H Discharge voltage: 2kV C: 150pF The products can recoverable smoothly after 4-12 ESD Discharge resistance：330Ω 3 ESD test. Positive10 times 1 time for each second Sichuan AI-Link Technology Co., Ltd. page 12 of 13

WF-M601-UWS2 IEEE 802.11b/g/n 1T1R USB WiFi Module 12、Statement 12.1 CE Radiation Exposure Statement Herby,Sichuan AI-Link Technology CO.,Ltd declares that this Wireless Module，WF-M601-UWS2 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product allowed to be used in all EU member states. Operation temperature:Use the WF-M601-UWS2 in the environment with the temperature between 0℃ and 60℃. Operation Frequency:2412~2472MHz. MAX RF Output Power:20dBm. Manufacturer：Sichuan AI-Link Technology CO.,Ltd Address：Anzhou,Industrial park,Mianyang,Sichuan Tel: +86 0816-2438701 Fax: +86 0816-2416943 E-mail: caixia.hu@changhong.com 12.2 FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Sichuan AI-Link Technology Co., Ltd. page 13 of 13

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. OEM INTEGRATION INSTRUCTIONS: This device is intended only for OEM integrators under the following conditions: The module must be installed in the host equipment such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co—located with any othertransmitter or antenna. The module shall be only used with the internal on—board antenna that has been originally tested and certified with this module. External antennas are not supported. As long as these 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end—product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). The end—product may need Verification testing, Declaration of Conformity testing, a Permissive Class II Change or new Certification. Please involve a FCC certification specialist in order to determine what will be exactly applicable for the end—product. Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or co—location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re— evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. in such cases, please involve a FCC certification specialist in order to determine if a Permissive Class II Change or new Certification is required. Upgrade Firmware: The software provided for firmware upgrade will not be capable to affect any RF parameters as certified for the FCC for this module, in order to prevent compliance issues. End product labeling: This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: 2AOKI—WFM6O1UWS2*. Information that must be placed in the end user manual: The OEM integrator has to be aware not to provide information to the end user regarding how to install or removethis RF module in the user‘s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.


Document Created: 2018-06-26 09:21:36
Document Modified: 2018-06-26 09:21:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC