user manual

FCC ID: 2AOK9-MIDRIVED06

Users Manual

Download: PDF
FCCID_4252305

Product overview Installation User guide 1. Install the electrostatic sticker Please scan the QR code below to get the online user guide. Please use the product according to the instructions in the user guide. Clean your windshield and put the electrostatic sticker on the recommended area as shown in the figure below. Make sure you remove air bubbles between the sticker and the glass. Mounting bracket 2. Stick the camera mount to the windshield Install APP Please use the product with the 70mai app. To download and install the app, search for “70mai”in Remove the protective cover from the mount and stick the Google Play Store (Android) or App Store (iOS). mount's base to the center of the electrostatic sticker. Make sure your dash cam body is parallel to the ground. Or you can download the app by scanning the QR code below: Press the mount to attach it to the electrostatic sticker tightly. Mic Indicator Reset TF card slot USB port Screw Speaker Camera Power key 3. Connect USB cable to the cigarette lighter receptacle Align the cable with the top edge of the windshield and fasten it 70mai Smart Dash Cam 1S Wi-Fi hotspot: along the passenger's side and the glovebox as shown below. Hotspot name：70mai_d01_XXXX（Please check the label on the device for the hotspot name.） Connect the cable to the power adapter and insert the adapter Default password：12345678 into the cigarette lighter receptacle Service: help@70mai.com Please refer to the online user guide for how to establish a connection. For further information, please go to www.70mai.com The cigarette lighter receptacle might be positioned differently in your car. The picture is provided for reference only. Package contents Safety precautions FCC 1. 70mai Smart Dash Cam 1S ×1 1. 70mai Smart Dash Cam 1S records videos outside of moving vehicles. It can't protect drivers and 11. Do not shake or press the product. Strong impact or shaking may cause irreparable damage to the Changes or modifications not expressly approved by the party responsible for compliance could void the 2. USB cable×1 passengers from any accidents. We shall not take any responsibility if the user gets involved in any product. user's authority to operate the equipment. 3. Power adapter×1 traffic accident and/or bear any loss due to product failure, information loss, or product operation. 12. Do not clean this product by chemical solvents or cleansers. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 4. Electrostatic sticker×1 2. Due to differences in vehicle type, driving preferences, the environment, and other differences, parts of to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful the product or the whole product may not work normally in some circumstances. The device may not 13. Use this product within the scope of the law. 5. Heat resistant adhesive (sticked to the mounting bracket)×1 interference in a residential installation. This equipment generates, uses and can radiate radio frequency 6. User manual×1 record normally due to loss of power source, abnormal temperatures and/or humidity, collisions, 14. Please note that the housing's temperature rises when the device is running. energy and, if not installed and used in accordance with the instructions, may cause harmful interference damage to the TF card, and other reasons. We do not guarantee that all the recorded videos will be to radio communications. However, there is no guarantee that interference will not occur in a particular saved completely in any given situation. The images recorded by this product are for reference only. installation. 3. Install the product correctly. Do not block the driver's vision. Do not obstruct the air bag. Keep the 70mai Smart Dash Cam 1S User Manual If this equipment does cause harmful interference to radio or television reception, which can be product at least 20cm away from the driver and passengers. Incorrect installation of the product may determined by turning the equipment off and on, the user is encouraged to try to correct the interference cause product failure and injury. by one or more of the following measures: Specifications -- Reorient or relocate the receiving antenna. 4. Keep this product away from strong magnetic fields to avoid damage. -- Increase the separation between the equipment and receiver. Model name: Midrive D06 5. Do not insert or pull out the TF card when the product is working to avoid damaging the TF card. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Resolution: 1080P, 30FPS 6. Use a TF card with storage capacity between 16GB and 64GB, and reading and writing speed not -- Consult the dealer or an experienced radio/TV technician for help. FOV: 130° lower than Class10. Format the TF card before using it. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Aperture: F2.2 7. TF card may be damaged after repetitive use. Replace TF cards in time to maintain proper recording. this device may not cause harmful interference, and (2) this device must accept any interference received, We shall not bear any responsibility caused by failed TF cards. including interference that may cause undesired operation. RAM: 512Mb Extended storage: MicroSD card, 16GB~64GB, Class10 or above 8. The product can record and save footage of traffic accidents, but we do not guarantee all accident This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This footage can be recorded and saved. Small collisions may not be detected by the sensor, therefore, the equipment should be installed and operated with a minimum distance of 20cm between the radiator & your Wi-Fi: IEEE 802.11 b/g/n 2.4GHz footage may not be placed among the event videos. body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 9. Do not use this product in temperatures higher than 60℃ or lower than -20℃. 10. The battery may get discharged if the device is not used for a long time. You might be asked to reset the device time when you power the device on again.


Document Created: 2019-04-04 18:35:44
Document Modified: 2019-04-04 18:35:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC