RF Exposure

FCC ID: 2AOK9-MIDRIVED05

RF Exposure Info

Download: PDF
FCCID_4364316

Bay Area Compliance Laboratories Corp. (Kunshan)                                    Report No.: RKSA190523005-00B


FCC §1.1310 & §2.1091 –MAXIMUM PERMISSIBLE EXPOSURE (MPE)
Applicable Standard

According to subpart §2.1091 and subpart §1.1310, systems operating under the provisions of this section shall be
operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the
Commission’s guidelines.

Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091)

                             (B) Limits for General Population/Uncontrolled Exposure

  Frequency Range              Electric Field           Magnetic Field         Power Density          Averaging Time
       (MHz)                  Strength (V/m)            Strength (A/m)           (mW/cm2)               (minutes)

       0.3-1.34                      614                     1.63                  *(100)                     30
        1.34-30                     824/f                   2.19/f                *(180/f²)                   30
        30-300                      27.5                    0.073                    0.2                      30
       300-1500                       /                        /                   f/1500                     30
     1500-100,000                     /                        /                     1.0                      30

f = frequency in MHz; * = Plane-wave equivalent power density;

According to §1.1310 and §2.1091 RF exposure is calculated.

Calculated Formulary:
Predication of MPE limit at a given distance
S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2);
P = power input to the antenna (in appropriate units, e.g., mW);
G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is
normally numeric gain;
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm);

Calculated Data:

                                                               Tune-up
                   Frequency          Antenna Gain            Conducted         Evaluation        Power
                                                                                                              MPE Limit
    Mode             Range                                      Power            Distance        Density
                                                                                                              (mW/cm2)
                     (MHz)                                                         (cm)         (mW/cm2)
                                    (dBi)     (numeric)     (dBm) (mW)
   802.11b                          1.00         1.26       19.50      89.13         20           0.0223           1.0
   802.11g         2412~2462        1.00         1.26       21.50     141.25         20           0.0354           1.0
    802.11
                                    1.00         1.26       21.50     141.25         20           0.0354           1.0
   n-HT20
    802.11
                   2422~2452        1.00         1.26       20.00     100.00         20           0.0251           1.0
   n-HT40

Note: The tune-up conducted power was declared by the manufacturer.

Conclusion: The device meets MPE at distance 20cm.




FCC Part 15.247                                                                                            Page 12 of 60



Document Created: 2019-07-19 09:16:56
Document Modified: 2019-07-19 09:16:56

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC