Test Report

FCC ID: 2AOIUGOG400

Test Report

Download: PDF
FCCID_4481681

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 1 of 16 TEST REPORT Application No.: SZEM1907016747CR Applicant: Pelican Products, Inc. Address of Applicant: 23215 Early Avenue, Torrance, California, 90505 United States Manufacturer: Pelican Products, Inc. Address of Manufacturer: 23215 Early Avenue, Torrance, California, 90505 United States Factory: SHENZHEN TOPBAND CO., LTD. Address of Factory: Topband Building, Liyuan Industrial Park, Shiyan Town, Bao’an District, Shenzhen, China. Equipment Under Test (EUT): EUT Name: G40 Charge Case Model No.: GOG400-0050-DGRY Trade mark: Pelican FCC ID: 2AOIUGOG400 Standard(s) : 47 CFR Part 18 Date of Receipt: 2019-07-25 Date of Test: 2019-07-31 to 2019-08-15 Date of Issue: 2019-08-19 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 2 of 16 Revision Record Version Chapter Date Modifier Remark 01 2019-08-19 Original Authorized for issue by: Leo Li /Project Engineer Eric Fu /Reviewer

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 3 of 16 2 Test Summary Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated emission 47 CFR Part 18 FCC MP-5 Part 18.305 Pass Conducted 47 CFR Part 18 FCC MP-5 Part 18.307 Pass disturbance

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 4 of 16 3 Contents Page COVER PAGE ... ... 0nen enmeenmnnneernenrrerenerrerernerrrerennerrreennerererernerrrererernenenennenen en nnenenernnnennnernnnennnennnnennnnn en 1 TEST SUMMARV ... 000000000 mm rmerreernerrrerernrrrerernerrrerernerererernerererernererererennenenennenen en nnenenernnnennnernnnennnennnnnnneee3 CONTENTS. GENERAL INFORMATION ... .. ... .. ce eeeneeeererererereerererereerererereerererereerener en nenenenernen en en nen en en nenenenenenennenenen en 5 4.1 DETAILS OF EAU. T. .22 en e en en en en n en en en eve en en en en en en en en en en en en en eneneveenenevee en enevneennenevnnnnnenene 5 4.2 DESCRIPTION OF SUPPORT UNITS ... . ... ... ce en e en en m en en n en eeeee n en en en en en en en en en en en en en en enenennnnn en 5 4.3 MEASUREMENT UNCERTAINTY . .5 4.4 TEST LOCATION................ll.. .6 4.5 TEST FACILITY .200 e 0000 en en e en en n en en n en en en en en en en en en eneeee en eneene en enevee en en en en n enevee en eneveeeenenenen en 6 4.6 DEVIATION FROM STANDARDS.........ccccccee es .6 4.7 ABNORMALITIES FROM STANDARD CONDITIONS 6 EQUIPMENT LIST ... ... 000 000mmm 00e eeereerrrerereeerreerneerreerneerreerneerreernerrernenererenrnenen en nnenen en nnenen en nnennn en nnnnn 7 RADIO SPECTRUM MATTER TEST RESULTS ... ... .. en 6e eeermeereeermereeermeereeenmeerereeneereennmenreennnens 8 6.1 CONDUCTED DISTURBANCE. 8 6.1.1 E.U.T. Operation....... .8 6.1.2 TBSt S@LUD DI@GI@M.................cccceeeeeerereveemerereveenerereveenererevenenereveneneneneenenenev en nenevenenenevenenenene 8 6.1.3 Measurement Procedure and Data. .8 6.2 RADIATED EMISSION .. ... cce 11 6.2.1. E.U.T. OD@TANIOM.........cccccmmeemereremereereremeenerenemeenerenereenereneneeneneneneeeeneneeneneneneeneneneneenenennerene n 12 6.2.2 Test Setup Diagram ....cl.l.lll 12 6.2.3 Measurement Procedure and Data. 13 PHOTOGRAP HS ..... ... 00. 00e mm 60e e rrerrrererrerrreernerrreernerrreernererenrnerreer en reen en rnenen en rnenen en nnenen en nnenen en nnn 16 7.1 TEST SETUP . .220 en en en en en m en en n en en en en en n en en en en en en enevee en enevee en enevevee en evee en enevee en eneveneenenenen en 16 7.2 EUT CONSTRUCTIONAL DETAILS (EUT PHOTOS)...... ... ces esn en en en en en eere n en eneeeneneeeneeeneeeneneneerenen e 16 Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overieaf, available on request or accessible at hitp:\win.sgs.comen/Terms—and—Conditions..aspx and, for electronic format documents, Subject to Terms and Gonditions for blectrontelwim.sgs.comfen Documents at hi Terms—ang:Condiionsyterms—e—Dooument.aspr: Attention is drawn to the limitation of iability, indemnification and jurisdietion issues defined therein. Any holder of this document is advised that information contained hereon raflects the Company‘s findings at the time of ts intervention only and within the !imits of Client‘s instructions, if any. The Company‘s sole responsibility is to its Client and this document does not exoncrate parties to a fransaction from exércising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full. without prior written approval of the Company. Any unauthorized alteration, forgery or faleification of the content or appearance of this documentis unlawful and offenders may be prosecuted to the fullest extent the law. Unless otherwise stated the results shown in this test report refer only to the sample() tested and such sample(s) are retained for 30 days n Attention: To check the authenticity 0 tasting‘Iimapoction report & sertificate, please contact us at fdlaphone: (86—755) 8307 1443, or email: CN.Doecheck@sgs.com No.t Wortshop, Idde Secton,Scence 8 Technology Par, Ghenthen,Chine §18057. t (B6—758)20012063 1 (86—755) 26710504 wmsgsgroup.com.en #B +201A EM—104—8TB AB#i: 518057 t (B6—758)26012053 1 (@6—755) 26710504 sgs.china@sgs.com t Member of the SGS Group (SGS SA)

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 5 of 16 4 General Information 4.1 Details of E.U.T. Power supply: Lithium Ion Battery: DC 3.7V Capacity: 10000mAh/37Wh Input: Micro USB Port DC 5V/2A Output: USB Port: DC5V/2A WPC: 5W(DC 5V/1A) Cable: USB cable: 37cm shielded Operation Frequency: 114.26kHz to 185.26kHz Modulation Type: Load Modulation Antenna Type: Loop Antenna 4.2 Description of Support Units Description Manufacturer Model No. Serial No. Adapter LeTV EQ-248CN 16041847014 iPhone 8 Apple A1863 F4GVQ656JC6D 4.3 Measurement Uncertainty No. Item Measurement Uncertainty 1 Radio Frequency ± 7.25 x 10-8 2 Conduction Emission ± 3.0dB (150kHz to 30MHz) ± 4.5dB (Below 1GHz) 3 Radiated Spurious emission test ± 4.8dB (Above 1GHz) 4 Temperature test ± 1°C 5 Humidity test ± 3% 6 Supply voltages ± 1.5% 7 Time ± 3%

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 6 of 16 4.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 4.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.6 Deviation from Standards None 4.7 Abnormalities from Standard Conditions None

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 7 of 16 5 Equipment List Conducted Emissions at Mains Terminals (150kHz-30MHz) Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shielding Room ChangZhou ZhongYu GB-88 SEM001-06 2019-06-13 2024-06-12 e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM024-01 2019-07-11 2020-07-10 LISN Rohde & Schwarz ENV216 SEM007-01 2018-09-25 2019-09-24 LISN ETS-LINDGREN 3816/2 SEM007-02 2019-04-01 2020-03-31 EMI Test Receiver Rohde & Schwarz ESCI SEM004-02 2019-04-01 2020-03-31 Radiated emission Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date 10m Semi-Anechoic SAEMC FSAC1018 SEM001-03 2018-03-31 2021-03-30 Chamber e3 V8.2014-6- Measurement Software AUDIX N/A N/A N/A 27 Coaxial Cable SGS N/A SEM029-01 2019-07-11 2020-07-10 EMI Test Receiver Rohde & Schwarz ESR SEM004-03 2019-04-01 2020-03-31 (9kHz-7GHz) BiConiLog Antenna ETS-LINDGREN 3142C SEM003-02 2019-05-24 2022-05-23 (26-3000MHz) Sonoma Instrument Pre-amplifier 310N SEM005-04 2019-04-12 2020-04-11 Co Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21 General used equipment Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-03 2018-09-27 2019-09-26 Indicator Industry Factory Shanghai Humidity/ Temperature Meteorological ZJ1-2B SEM002-04 2018-09-27 2019-09-26 Indicator Industry Factory Humidity/ Temperature Mingle N/A SEM002-08 2018-09-27 2019-09-26 Indicator Changchun Barometer Meteorological DYM3 SEM002-01 2019-04-04 2020-04-03 Industry Factory

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 8 of 16 6 Radio Spectrum Matter Test Results 6.1 Conducted disturbance Test Requirement Part 18.307 Test Method: FCC MP-5 Frequency Range: 150kHz to 30MHz Limit: Conducted limit (dBμV) Frequency of emission (MHz) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency. 6.1.1 E.U.T. Operation Operating Environment: Temperature: 21.7 °C Humidity: 60.1 % RH Atmospheric Pressure: 1005 mbar Test mode: e:Charge mode+discharging mosw_Keep the battery of the EUT in charging and discharging via WPC for smart phone. 6.1.2 Test Setup Diagram 6.1.3 Measurement Procedure and Data

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 9 of 16 Mode:e; Line:Live Line

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 10 of 16 Mode:e; Line:Neutral Line

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 11 of 16 6.2 Radiated emission Test Requirement Part 18.305 Test Method: FCC MP-5 Measurement Distance: 3m Limit: 1Field strength may not exceed 10 μV/m at 1600 meters. Consumer equipment operating below 1000 MHz is not permitted the increase in field strength otherwise permitted here for power over 500 watts. 2Reduced to the greatest extent possible. 3Field strength may not exceed 10 μV/m at 1600 meters. Consumer equipment is not permitted the increase in field strength otherwise permitted here for over 500 watts. 4Induction cooking ranges manufactured prior to February 1, 1980, shall be subject to the field strength limits for miscellaneous ISM equipment.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 12 of 16 6.2.1 E.U.T. Operation Operating Environment: Temperature: 23 °C Humidity: 54 % RH Atmospheric Pressure: 1005 mbar Pretest these b:WPC Charge mode_Keep the EUT charging via WPC modes to find e:Charge mode+discharging mosw_Keep the battery of the EUT in charging and the worst case: discharging via WPC for smart phone. The worst case e:Charge mode+discharging mosw_Keep the battery of the EUT in charging and for final test: discharging via WPC for smart phone. 6.2.2 Test Setup Diagram

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 13 of 16 6.2.3 Measurement Procedure and Data Test Procedure: a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber(30MHz-1000MHz) and 3 meter semi-anechoic chamber(9kHz-30MHz). The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 10 meters(30MHz-1000MHz) and 10 meter (9kHz-30MHz) away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Above 30MHz: The Analyzer/Receiver scanned from 30MHz to 1000MHz.The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. Below 30MHz: The Analyzer/Receiver scanned from 9kHz to 30MHz.The antenna height is 2 meters above the ground to determine the maximum value of the field strength. e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 2 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. h. Repeat above procedures until all frequencies measured was complete. i. Measurement Requirement: 1)This product belongs to non-ISM equipment, the field strength limit is 15uV/m at 300 meter distance. 2)Limit: 20log(15uV/m) +20log (300/3) =23.52+40=63.52dBuV/m at 3 meters distance.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 14 of 16 9K-150K Mode e:

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 15 of 16 150K-30M Mode e:

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM190701674702 Page: 16 of 16 7 Photographs 7.1 Test Setup Please refer to setup photos. 7.2 EUT Constructional Details (EUT Photos) Please Refer to external and internal photos for details. - End of the Report -


Document Created: 2019-09-06 08:14:11
Document Modified: 2019-09-06 08:14:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC