RF Exposure

FCC ID: 2AOIU-C00220

RF Exposure Info

Download: PDF
FCCID_4376608

FCC ID: 2AOIU-C00220 FCC 47 CFR MPE REPORT Pelican Products, Inc. EMS Recharge Model Number: C00220 FCC ID: 2AOIU-C00220 Prepared for: Pelican Products, Inc. 23215 Early Avenue, Torrance, California, 90505, United States Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R1907002 Date of Test: Jun. 25~Jul. 29, 2019 Date of Report: Jul. 29, 2019 EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 1 of 11

FCC ID: 2AOIU-C00220 Environmental evaluation and exposure limit according to FCC CFR 47 Part 1.1307(b), 1.1310 1. Limits for Maximum Permissible Exposure (MPE) 2. Test equipment Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. E-Magnetic field probe Narda 2304/03 M-0018 June,29,18 1 Year Broadband field meter Narda ELT-400 N-0045 June,29,18 1 Year 3. Test setup A: 15cm 20 cm EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 2 of 11

FCC ID: 2AOIU-C00220 B: a. The test was performed on 360 degree turn table in anechoic chamber. b. The probe was placed at 15 cm surrounding the device and 20 cm above the top of the charger and the geometric centre of the probe, for test setup A. c. Measure magnetic and electrical field strength at a distance 10cm to 1cm at 1cm iteration, Which is between the edge of the charger and the edge of of probe, for test setup B. d. The highest emission level was recorded and compared with limit as soon as measurement of each point; A, B, C, D, E were completed. e. The EUT was measured according to the dictates of KDB680106D01v03; And KDB Tracking Number 671578; TCB Workshop, October 2018, 5.2 RF Exposure Procedures. EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 3 of 11

FCC ID: 2AOIU-C00220 4. Equipment Approval Considerations According to the item 5(b) of KDB 680106 D01 RF Exposure Wireless Charging App v03. 1 Power transfer frequency is less that 1 MHz YES; the device operated in the frequency range from 110.5-205KHz. 2 Output power from each primary coil is less than or equal to 15 watts. YES; the maximum output power of the primary coil is 5W. The transfer system includes only single primary and secondary coils. This includes 3 charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. YES; the transfer system includes only single primary and secondary coils. 4 Client device is placed directly in contact with the transmitter. YES; Client device is placed directly in contact with the transmitter. Mobile exposure conditions only (portable exposure conditions are not covered by 5 this exclusion). No. The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the 6 top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. YES; The EUT field strength levels are 50% x MPE limts. 5. Test Mode Mode Description Full Load Charging mode with dummy load Half Load Empty Load All power supplies working mode have been tested, The worst is the internal battery working mode, and only the worst results have been reported. EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 4 of 11

FCC ID: 2AOIU-C00220 6. Test Result Test Result for Test setup A: E-Filed Strength at (15 cm from edges A,B,C,D, 20 cm from top E) surrounding the EUT (V/m) Test Mode Full Load Half Load Empty Load Frequency range (kHz) 110.5 to 205 kHz Position A(V/m) 1.348 1.211 1.171 Position B(V/m) 1.322 1.212 1.168 Position C(V/m) 1.344 1.152 1.121 Position D(V/m) 1.205 1.201 1.115 Position E(V/m) 1.511 1.352 1.315 Limits (V/m) 614 50% Limits(V/m) 304 H-Filed Strength at (15 cm from edges A,B,C,D, 20 cm from top E) surrounding the EUT (A/m) Test Mode Full Load Half Load Empty Load Frequency range (kHz) 110.5 to 205 kHz Position A(A/m) 0.128 0.127 0.101 Position B(A/m) 0.112 0.121 0.110 Position C(A/m) 0.115 0.115 0.114 Position D(A/m) 0.110 0.115 0.099 Position E(A/m) 0.198 0.195 0.155 Limits (A/m) 1.630 50% Limits (A/m) 0.625 EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 5 of 11

FCC ID: 2AOIU-C00220 Test Result for Test setup B: Empty , Half , Full load all have been tested ,only worse case Max load (Full) is reported. E-Filed Strength at (distance 10cm to 1cm at 1cm iteration, i.e. at a distance of 10cm, 9cm, 8cm, ……. 1cm, Which is between the edge of the charger and the edge of of probe,) surrounding the EUT (V/m) Test distance Position A Position B Position C Position D Position E Limits (cm) (V/m) (V/m) (V/m) (V/m) (V/m) (V/m) 1 1.685 1.648 1.685 1.678 2.187 614 2 1.678 1.669 1.677 1.664 2.168 614 3 1.584 1.578 1.598 1.654 2.141 614 4 1.545 1.554 1.588 1.599 2.121 614 5 1.544 1.541 1.586 1.585 2.045 614 6 1.535 1.534 1.575 1.578 1.981 614 7 1.531 1.532 1.571 1.571 1.878 614 8 1.489 1.498 1.568 1.561 1.868 614 9 1.487 1.488 1.561 1.550 1.850 614 10 1.454 1.455 1.544 1.549 1.774 614 H-Filed Strength at (distance 10cm to 1cm at 1cm iteration, i.e. at a distance of 10cm, 9cm, 8cm, ……. 1cm, Which is between the edge of the charger and the edge of of probe,) surrounding the EUT (A/m) Test distance Position A Position B Position C Position D Position E Limits (cm) (A/m) (A/m) (A/m) (A/m) (A/m) (A/m) 1 0.301 0.304 0.331 0.315 0.415 1.63 2 0.289 0.301 0.300 0.305 0.300 1.63 3 0.285 0.289 0.298 0.295 0.298 1.63 4 0.274 0.277 0.288 0.277 0.288 1.63 5 0.266 0.258 0.282 0.268 0.278 1.63 6 0.248 0.249 0.276 0.255 0.276 1.63 7 0.221 0.245 0.266 0.251 0.268 1.63 8 0.201 0.212 0.240 0.221 0.241 1.63 9 0.195 0.199 0.224 0.201 0.215 1.63 10 0.175 0.187 0.201 0.198 0.204 1.63 EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 6 of 11

FCC ID: 2AOIU-C00220 8. Test Setup Photo Position A EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 7 of 11

FCC ID: 2AOIU-C00220 Position B EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 8 of 11

FCC ID: 2AOIU-C00220 Position C EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 9 of 11

FCC ID: 2AOIU-C00220 Position D EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 10 of 11

FCC ID: 2AOIU-C00220 Position E Note: The dummy load must be placed horizontal of the EUT at the top.(Parallel to the coil) ====END==== EST Technology Co. ,Ltd Report No. ESTE-R1907002 Page 11 of 11


Document Created: 2019-07-29 13:48:48
Document Modified: 2019-07-29 13:48:48
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC