Test Report MPE

FCC ID: 2AOG5-6630

Test Report

Download: PDF
FCCID_4438586

FCC ID: 2AOG5-6630 Page 1 / 8 Report No.: T190219D04-MF Rev.: 00 IEEE C95.1 2005 KDB 447498 D03 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For WiFi/BT/GPS RF Module Model: AK-6630 Trade Name: ASUKA Issued to Asuka Autotronics Inc. 2F, No.12, Prosperity Rd. II, SBIP, Hsinchu, Taiwan Issued by Compliance Certification Services Inc. Wugu Laboratory No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) Issue Date: September 2, 2019 Note: This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NIST or any government agencies. The test results in the report only apply to the tested sample. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan / 新北市五股區五工六路 11 號 t:(886-2) 2299-9720 f:(886-2) 2298-1882 www.sgs.tw www.ccsrf.com

Page 2 / 8 Report No.: T190219D04-MF Rev.: 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 September 2, 2019 Initial Issue ALL Allison Chen

Page 3 / 8 Report No.: T190219D04-MF Rev.: 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ........................................................................ 4 2. LIMIT .................................................................................................................... 5 3. EUT SPECIFICATION.......................................................................................... 6 4. TEST RESULTS .................................................................................................. 7 5. MAXIMUM PERMISSIBLE EXPOSURE .............................................................. 8

Page 4 / 8 Report No.: T190219D04-MF Rev.: 00 1. TEST RESULT CERTIFICATION We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10: 2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247. The test results of this report relate only to the tested sample EUT identified in this report. APPLICABLE STANDARDS STANDARD TEST RESULT IEEE C95.1 2005 KDB 447498 D03 No non-compliance noted 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 Statements of Conformity Determination of compliance is based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. Approved by: Reporter: Kevin Tsai Allison Chen Deputy Manager Report coordinator Compliance Certification Services Inc. Compliance Certification Services Inc.

Page 5 / 8 Report No.: T190219D04-MF Rev.: 00 2. LIMIT According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter.

Page 6 / 8 Report No.: T190219D04-MF Rev.: 00 3. EUT SPECIFICATION EUT WiFi/BT/GPS RF Module Model AK-6630 Bluetooth: 2402MHz-2480MHz 802.11b/g/n HT20: 2412MHz ~ 2462 MHz 802.11n HT40: 2422MHz ~ 2452MHz 802.11a/n HT20: 5180MHz ~ 5240MHz / 5260MHz ~ 5320MHz / Frequency band 5500MHz ~ 5700MHz / 5745MHz ~ 5825MHz (Operating) 802.11n HT40: 5190MHz ~ 5230MHz / 5270MHz ~ 5310MHz / 5510MHz ~ 5670MHz / 5755MHz ~ 5795MHz 802.11ac VHT80: 5210MHz / 5290MHz / 5530MHz / 5775MHz Others Portable (<20cm separation) Device category Mobile (>20cm separation) Others Occupational/Controlled exposure (S = 5mW/cm2) Exposure General Population/Uncontrolled exposure classification (S=1mW/cm2) Antenna Bluetooth : Antenna Gain : 2.00 dBi (Numeric gain:1.58) Specification WIFI 2.4GHz Antenna Gain : 2.00 dBi (Numeric gain:1.58) Bluetooth: 6.62 dBm (4.592 mW) 2.4GHz: Maximum IEEE 802.11b Mode: 11.97 dBm (15.740 mW) Measurement Average Power IEEE 802.11g Mode: 12.75 dBm (18.836 mW) IEEE 802.11n HT 20 Mode: 13.70 dBm (23.442 mW) IEEE 802.11n HT 40 Mode: 13.91 dBm (24.604 mW) Bluetooth: 7.50 dBm (5.623 mW) 2.4GHz: Maximum tune up IEEE 802.11b Mode: 12.50 dBm (17.783 mW) power IEEE 802.11g Mode: 13.50 dBm (22.387 mW) IEEE 802.11n HT 20 Mode: 14.50 dBm (28.184 mW) IEEE 802.11n HT 40 Mode: 14.50 dBm (28.184 mW) MPE Evaluation* Evaluation applied SAR Evaluation N/A

Page 7 / 8 Report No.: T190219D04-MF Rev.: 00 4. TEST RESULTS No non-compliance noted. Calculation 30  P  G E2 Given E= & S= d 377 Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 30  P  G S= 377 d 2 Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields 30  (P / 1000 )  G PG S= = 0.0796  2 Equation 1 377  (d / 100 ) 2 d Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2

Page 8 / 8 Report No.: T190219D04-MF Rev.: 00 5. MAXIMUM PERMISSIBLE EXPOSURE Substituting the MPE safe distance using d = 20 cm into Equation 1: S = 0.000199  P  G Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 Bluetooth: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 78 2480 5.623 1.58 20 0.0018 1 IEEE 802.11b mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 11 2462 17.783 1.58 20 0.0056 1 IEEE 802.11g mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 6 2437 22.387 1.58 20 0.0070 1 IEEE 802.11n HT20 mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 6 2437 28.184 1.58 20 0.0089 1 IEEE 802.11n HT40 mode: Ch. Frq.(MHz) P (mW) Gain (num.) D (cm) Power density in mW / cm2 Limit (mW/cm2) 6 2437 28.184 1.58 20 0.0089 1 --End of Report--


Document Created: 2019-09-16 18:31:22
Document Modified: 2019-09-16 18:31:22
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC